Merge branches 'pnp', 'powercap', 'pm-runtime' and 'pm-opp'

* pnp:
  MAINTAINERS: Remove Bjorn Helgaas as PNP maintainer
  PNP / resources: remove positive test on unsigned values

* powercap:
  powercap / RAPL: add new CPU IDs
  powercap / RAPL: further relax energy counter checks

* pm-runtime:
  PM / runtime: Update documentation to reflect the current code flow

* pm-opp:
  PM / OPP: discard duplicate OPPs
  PM / OPP: Make OPP invisible to users in Kconfig
  PM / OPP: fix incorrect OPP count handling in of_init_opp_table

Documentation/power/runtime_pm.txt

@@ -665,15 +665,17 @@ The PM core does its best to reduce the probability of race conditions between
 the runtime PM and system suspend/resume (and hibernation) callbacks by carrying
 out the following operations:
 
-  * During system suspend it calls pm_runtime_get_noresume() and
-    pm_runtime_barrier() for every device right before executing the
-    subsystem-level .suspend() callback for it.  In addition to that it calls
-    __pm_runtime_disable() with 'false' as the second argument for every device
-    right before executing the subsystem-level .suspend_late() callback for it.
-
-  * During system resume it calls pm_runtime_enable() and pm_runtime_put()
-    for every device right after executing the subsystem-level .resume_early()
-    callback and right after executing the subsystem-level .resume() callback
+  * During system suspend pm_runtime_get_noresume() is called for every device
+    right before executing the subsystem-level .prepare() callback for it and
+    pm_runtime_barrier() is called for every device right before executing the
+    subsystem-level .suspend() callback for it.  In addition to that the PM core
+    calls  __pm_runtime_disable() with 'false' as the second argument for every
+    device right before executing the subsystem-level .suspend_late() callback
+    for it.
+
+  * During system resume pm_runtime_enable() and pm_runtime_put() are called for
+    every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .complete() callback
     for it, respectively.
 
 7. Generic subsystem callbacks

MAINTAINERS

@@ -6938,7 +6938,6 @@ F:	drivers/power/
 
 PNP SUPPORT
 M:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
 

drivers/base/power/opp.c

@@ -394,6 +394,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
  * to keep the integrity of the internal data structures. Callers should ensure
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
+ *
+ * Return:
+ * 0:		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST:	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM:	Memory allocation failure
  */
 int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
 {
@@ -443,15 +450,31 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
 	new_opp->u_volt = u_volt;
 	new_opp->available = true;
 
-	/* Insert new OPP in order of increasing frequency */
+	/*
+	 * Insert new OPP in order of increasing frequency
+	 * and discard if already present
+	 */
 	head = &dev_opp->opp_list;
 	list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
-		if (new_opp->rate < opp->rate)
+		if (new_opp->rate <= opp->rate)
 			break;
 		else
 			head = &opp->node;
 	}
 
+	/* Duplicate OPPs ? */
+	if (new_opp->rate == opp->rate) {
+		int ret = opp->available && new_opp->u_volt == opp->u_volt ?
+			0 : -EEXIST;
+
+		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
+			 __func__, opp->rate, opp->u_volt, opp->available,
+			 new_opp->rate, new_opp->u_volt, new_opp->available);
+		mutex_unlock(&dev_opp_list_lock);
+		kfree(new_opp);
+		return ret;
+	}
+
 	list_add_rcu(&new_opp->node, head);
 	mutex_unlock(&dev_opp_list_lock);
 
@@ -734,11 +757,9 @@ int of_init_opp_table(struct device *dev)
 		unsigned long freq = be32_to_cpup(val++) * 1000;
 		unsigned long volt = be32_to_cpup(val++);
 
-		if (dev_pm_opp_add(dev, freq, volt)) {
+		if (dev_pm_opp_add(dev, freq, volt))
 			dev_warn(dev, "%s: Failed to add OPP %ld\n",
 				 __func__, freq);
-			continue;
-		}
 		nr -= 2;
 	}
 

drivers/pnp/resource.c

@@ -360,7 +360,7 @@ int pnp_check_irq(struct pnp_dev *dev, struct resource *res)
 		return 1;
 
 	/* check if the resource is valid */
-	if (*irq < 0 || *irq > 15)
+	if (*irq > 15)
 		return 0;
 
 	/* check if the resource is reserved */
@@ -424,7 +424,7 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res)
 		return 1;
 
 	/* check if the resource is valid */
-	if (*dma < 0 || *dma == 4 || *dma > 7)
+	if (*dma == 4 || *dma > 7)
 		return 0;
 
 	/* check if the resource is reserved */

drivers/powercap/intel_rapl.c

@@ -951,7 +951,9 @@ static const struct x86_cpu_id rapl_ids[] = {
 	{ X86_VENDOR_INTEL, 6, 0x2d},/* Sandy Bridge EP */
 	{ X86_VENDOR_INTEL, 6, 0x37},/* Valleyview */
 	{ X86_VENDOR_INTEL, 6, 0x3a},/* Ivy Bridge */
-	{ X86_VENDOR_INTEL, 6, 0x45},/* Haswell */
+	{ X86_VENDOR_INTEL, 6, 0x3c},/* Haswell */
+	{ X86_VENDOR_INTEL, 6, 0x3d},/* Broadwell */
+	{ X86_VENDOR_INTEL, 6, 0x45},/* Haswell ULT */
 	/* TODO: Add more CPU IDs after testing */
 	{}
 };
@@ -1124,8 +1126,7 @@ static int rapl_register_powercap(void)
 static int rapl_check_domain(int cpu, int domain)
 {
 	unsigned msr;
-	u64 val1, val2 = 0;
-	int retry = 0;
+	u64 val = 0;
 
 	switch (domain) {
 	case RAPL_DOMAIN_PACKAGE:
@@ -1144,26 +1145,13 @@ static int rapl_check_domain(int cpu, int domain)
 		pr_err("invalid domain id %d\n", domain);
 		return -EINVAL;
 	}
-	if (rdmsrl_safe_on_cpu(cpu, msr, &val1))
-		return -ENODEV;
-
-	/* PP1/uncore/graphics domain may not be active at the time of
-	 * driver loading. So skip further checks.
+	/* make sure domain counters are available and contains non-zero
+	 * values, otherwise skip it.
 	 */
-	if (domain == RAPL_DOMAIN_PP1)
-		return 0;
-	/* energy counters roll slowly on some domains */
-	while (++retry < 10) {
-		usleep_range(10000, 15000);
-		rdmsrl_safe_on_cpu(cpu, msr, &val2);
-		if ((val1 & ENERGY_STATUS_MASK) != (val2 & ENERGY_STATUS_MASK))
-			return 0;
-	}
-	/* if energy counter does not change, report as bad domain */
-	pr_info("domain %s energy ctr %llu:%llu not working, skip\n",
-		rapl_domain_names[domain], val1, val2);
+	if (rdmsrl_safe_on_cpu(cpu, msr, &val) || !val)
+		return -ENODEV;
 
-	return -ENODEV;
+	return 0;
 }
 
 /* Detect active and valid domains for the given CPU, caller must
@@ -1180,6 +1168,9 @@ static int rapl_detect_domains(struct rapl_package *rp, int cpu)
 		/* use physical package id to read counters */
 		if (!rapl_check_domain(cpu, i))
 			rp->domain_map |= 1 << i;
+		else
+			pr_warn("RAPL domain %s detection failed\n",
+				rapl_domain_names[i]);
 	}
 	rp->nr_domains = bitmap_weight(&rp->domain_map,	RAPL_DOMAIN_MAX);
 	if (!rp->nr_domains) {

kernel/power/Kconfig

@@ -257,8 +257,7 @@ config ARCH_HAS_OPP
 	bool
 
 config PM_OPP
-	bool "Operating Performance Point (OPP) Layer library"
-	depends on ARCH_HAS_OPP
+	bool
 	---help---
 	  SOCs have a standard set of tuples consisting of frequency and
 	  voltage pairs that the device will support per voltage domain. This