Commit ce965c3d authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Jason Cooper

memory: mvebu-devbus: fix the conversion of the bus width

According to the Armada 370 and Armada XP datasheets, the part of the
Device Bus register that configure the bus width should contain 0 for
a 8 bits bus width, and 1 for a 16 bits bus width (other values are
unsupported/reserved).

However, the current conversion done in the driver to convert from a
bus width in bits to the value expected by the register leads to
setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus.

This mistake was compensated by a mistake in the existing Device Tree
files for Armada 370/XP platforms: they were declaring a 8 bits bus
width, while the hardware in fact uses a 16 bits bus width.

This commit fixes that by adjusting the conversion logic.

This patch fixes a bug that was introduced in
3edad321 ('drivers: memory: Introduce
Marvell EBU Device Bus driver'), which was merged in v3.11.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397489361-5833-2-git-send-email-thomas.petazzoni@free-electrons.com
Fixes: 3edad321 ('drivers: memory: Introduce Marvell EBU Device Bus driver')
Cc: stable@vger.kernel.org # v3.11+
Acked-by: default avatarEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent c9eaa447
......@@ -108,8 +108,19 @@ static int devbus_set_timing_params(struct devbus *devbus,
node->full_name);
return err;
}
/* Convert bit width to byte width */
r.bus_width /= 8;
/*
* The bus width is encoded into the register as 0 for 8 bits,
* and 1 for 16 bits, so we do the necessary conversion here.
*/
if (r.bus_width == 8)
r.bus_width = 0;
else if (r.bus_width == 16)
r.bus_width = 1;
else {
dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
return -EINVAL;
}
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
&r.badr_skew);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment