Commit ceb02dcf authored by Linus Walleij's avatar Linus Walleij

ARM: delete netx machine

After discussing with the subarch maintainers and Hilscher,
we concluded that the netx subarchitecture (Netx 100/500)
is no longer maintained or tested, and noone will miss it
if we delete it. So delete it.

There is a newer Netx 4000 architecture which we may see
included at some point, but this will be supported using
the standard multiplatform and devicetree mechanisms and is
easier to develop from scratch.

Cc: Michael Trensch <MTrensch@hilscher.com>
Acked-By: default avatarRobert Schwebel <r.schwebel@pengutronix.de>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent a188339c
...@@ -374,15 +374,6 @@ config ARCH_FOOTBRIDGE ...@@ -374,15 +374,6 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_NETX
bool "Hilscher NetX based"
select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_IOP13XX config ARCH_IOP13XX
bool "IOP13xx-based" bool "IOP13xx-based"
depends on MMU depends on MMU
...@@ -767,8 +758,6 @@ source "arch/arm/mach-mvebu/Kconfig" ...@@ -767,8 +758,6 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/mach-npcm/Kconfig" source "arch/arm/mach-npcm/Kconfig"
......
...@@ -638,13 +638,6 @@ choice ...@@ -638,13 +638,6 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
for Mediatek mt8135 based platforms on UART3. for Mediatek mt8135 based platforms on UART3.
config DEBUG_NETX_UART
bool "Kernel low-level debugging messages via NetX UART"
depends on ARCH_NETX
help
Say Y here if you want kernel low-level debugging support
on Hilscher NetX based platforms.
config DEBUG_NOMADIK_UART config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART" bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK depends on ARCH_NOMADIK
......
...@@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx ...@@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut
machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire machine-$(CONFIG_ARCH_NSPIRE) += nspire
......
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_NETX=y
CONFIG_MACH_NXDKN=y
CONFIG_MACH_NXDB500=y
CONFIG_MACH_NXEB500HMI=y
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySMX0,115200"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NET_IPGRE=m
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_NETFILTER=y
CONFIG_NET_PKTGEN=m
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PLATRAM=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_NETX=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_NETX=y
CONFIG_SERIAL_NETX_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_RTC_CLASS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m
CONFIG_LIBCRC32C=m
/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#define UART_DATA 0
#define UART_FLAG 0x18
#define UART_FLAG_BUSY (1 << 3)
.macro addruart, rp, rv, tmp
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_DATA]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #UART_FLAG]
tst \rd, #UART_FLAG_BUSY
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_FLAG]
tst \rd, #UART_FLAG_BUSY
bne 1001b
.endm
menu "NetX Implementations"
depends on ARCH_NETX
config MACH_NXDKN
bool "Enable Hilscher nxdkn Eval Board support"
help
Board support for the Hilscher NetX Eval Board
config MACH_NXDB500
bool "Enable Hilscher nxdb500 Eval Board support"
select ARM_AMBA
help
Board support for the Hilscher nxdb500 Eval Board
config MACH_NXEB500HMI
bool "Enable Hilscher nxeb500hmi Eval Board support"
select ARM_AMBA
help
Board support for the Hilscher nxeb500hmi Eval Board
endmenu
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y += time.o generic.o pfifo.o xc.o
# Specific board support
obj-$(CONFIG_MACH_NXDKN) += nxdkn.o
obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o
obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o
/*
* arch/arm/mach-netx/fb.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/err.h>
#include <linux/gfp.h>
#include <asm/irq.h>
#include <mach/netx-regs.h>
#include <mach/hardware.h>
static struct clcd_panel *netx_panel;
void netx_clcd_enable(struct clcd_fb *fb)
{
}
int netx_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = netx_panel;
fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = 1024*1024;
return 0;
}
int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
fb->fb.fix.smem_start, fb->fb.fix.smem_len);
}
void netx_clcd_remove(struct clcd_fb *fb)
{
dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
fb->fb.fix.smem_start);
}
static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
netx_panel = panel;
fb_device.dev.platform_data = board;
return amba_device_register(&fb_device, &iomem_resource);
}
/*
* arch/arm/mach-netx/fb.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
void netx_clcd_enable(struct clcd_fb *fb);
int netx_clcd_setup(struct clcd_fb *fb);
int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
void netx_clcd_remove(struct clcd_fb *fb);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel);
/*
* arch/arm/mach-netx/generic.c
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irqchip/arm-vic.h>
#include <linux/reboot.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <mach/netx-regs.h>
#include <asm/mach/irq.h>
static struct map_desc netx_io_desc[] __initdata = {
{
.virtual = NETX_IO_VIRT,
.pfn = __phys_to_pfn(NETX_IO_PHYS),
.length = NETX_IO_SIZE,
.type = MT_DEVICE
}
};
void __init netx_map_io(void)
{
iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc));
}
static struct resource netx_rtc_resources[] = {
[0] = {
.start = 0x00101200,
.end = 0x00101220,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device netx_rtc_device = {
.name = "netx-rtc",
.id = 0,
.num_resources = ARRAY_SIZE(netx_rtc_resources),
.resource = netx_rtc_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_rtc_device,
};
#if 0
#define DEBUG_IRQ(fmt...) printk(fmt)
#else
#define DEBUG_IRQ(fmt...) while (0) {}
#endif
static void netx_hif_demux_handler(struct irq_desc *desc)
{
unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
unsigned int stat;
stat = ((readl(NETX_DPMAS_INT_EN) &
readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
while (stat) {
if (stat & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
generic_handle_irq(irq);
}
irq++;
stat >>= 1;
}
}
static int
netx_hif_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int val, irq;
val = readl(NETX_DPMAS_IF_CONF1);
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
if (type & IRQ_TYPE_EDGE_RISING) {
DEBUG_IRQ("rising edges\n");
val |= (1 << 26) << irq;
}
if (type & IRQ_TYPE_EDGE_FALLING) {
DEBUG_IRQ("falling edges\n");
val &= ~((1 << 26) << irq);
}
if (type & IRQ_TYPE_LEVEL_LOW) {
DEBUG_IRQ("low level\n");
val &= ~((1 << 26) << irq);
}
if (type & IRQ_TYPE_LEVEL_HIGH) {
DEBUG_IRQ("high level\n");
val |= (1 << 26) << irq;
}
writel(val, NETX_DPMAS_IF_CONF1);
return 0;
}
static void
netx_hif_ack_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
writel((1 << 24) << irq, NETX_DPMAS_INT_STAT);
val = readl(NETX_DPMAS_INT_EN);
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static void
netx_hif_mask_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
val = readl(NETX_DPMAS_INT_EN);
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static void
netx_hif_unmask_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
val = readl(NETX_DPMAS_INT_EN);
val |= (1 << 24) << irq;
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static struct irq_chip netx_hif_chip = {
.irq_ack = netx_hif_ack_irq,
.irq_mask = netx_hif_mask_irq,
.irq_unmask = netx_hif_unmask_irq,
.irq_set_type = netx_hif_irq_type,
};
void __init netx_init_irq(void)
{
int irq;
vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
irq_set_chip_and_handler(irq, &netx_hif_chip,
handle_level_irq);
irq_clear_status_flags(irq, IRQ_NOREQUEST);
}
writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler);
}
static int __init netx_init(void)
{
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
subsys_initcall(netx_init);
void netx_restart(enum reboot_mode mode, const char *cmd)
{
writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
NETX_SYSTEM_RES_CR);
}
/*
* arch/arm/mach-netx/generic.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/reboot.h>
extern void __init netx_map_io(void);
extern void __init netx_init_irq(void);
extern void netx_restart(enum reboot_mode, const char *);
extern void netx_timer_init(void);
/*
* arch/arm/mach-netx/include/mach/hardware.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#define NETX_IO_PHYS 0x00100000
#define NETX_IO_VIRT 0xe0000000
#define NETX_IO_SIZE 0x00100000
#define SRAM_INTERNAL_PHYS_0 0x00000
#define SRAM_INTERNAL_PHYS_1 0x08000
#define SRAM_INTERNAL_PHYS_2 0x10000
#define SRAM_INTERNAL_PHYS_3 0x18000
#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
#define XPEC_MEM_SIZE 0x4000
#define XMAC_MEM_SIZE 0x1000
#define SRAM_MEM_SIZE 0x8000
#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT)
#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
#endif
/*
* arch/arm/mach-netx/include/mach/irqs.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define NETX_IRQ_VIC_START 64
#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0)
#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1)
#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2)
#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3)
#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4)
#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5)
#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6)
#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7)
#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8)
#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9)
#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10)
#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11)
#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12)
#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13)
#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14)
#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15)
#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16)
#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17)
#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18)
#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19)
#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20)
#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no))
#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21)
#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22)
#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23)
#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24)
#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25)
#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26)
/* int 27 is reserved */
/* int 28 is reserved */
#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29)
#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30)
/* int 31 is reserved */
#define NETX_IRQS (NETX_IRQ_VIC_START + 32)
/* for multiplexed irqs on gpio 0..14 */
#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
/* Host interface interrupts */
#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
This diff is collapsed.
/*
* arch/arm/mach-netx/include/mach/pfifo.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef ASM_ARCH_PFIFO_H
#define ASM_ARCH_PFIFO_H
static inline int pfifo_push(int no, unsigned int pointer)
{
writel(pointer, NETX_PFIFO_BASE(no));
return 0;
}
static inline unsigned int pfifo_pop(int no)
{
return readl(NETX_PFIFO_BASE(no));
}
static inline int pfifo_fill_level(int no)
{
return readl(NETX_PFIFO_FILL_LEVEL(no));
}
static inline int pfifo_full(int no)
{
return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
}
static inline int pfifo_empty(int no)
{
return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
}
int pfifo_request(unsigned int pfifo_mask);
void pfifo_free(unsigned int pfifo_mask);
#endif /* ASM_ARCH_PFIFO_H */
/*
* arch/arm/mach-netx/include/mach/uncompress.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. We search for the first enabled
* port in the most probable order. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*
* This does not append a newline
*/
#define REG(x) (*(volatile unsigned long *)(x))
#define UART1_BASE 0x100a00
#define UART2_BASE 0x100a80
#define UART_DR 0x0
#define UART_CR 0x14
#define CR_UART_EN (1<<0)
#define UART_FR 0x18
#define FR_BUSY (1<<3)
#define FR_TXFF (1<<5)
static inline void putc(char c)
{
unsigned long base;
if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
base = UART1_BASE;
else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
base = UART2_BASE;
else
return;
while (REG(base + UART_FR) & FR_TXFF);
REG(base + UART_DR) = c;
}
static inline void flush(void)
{
unsigned long base;
if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
base = UART1_BASE;
else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
base = UART2_BASE;
else
return;
while (REG(base + UART_FR) & FR_BUSY);
}
/*
* nothing to do
*/
#define arch_decomp_setup()
/*
* arch/arm/mach-netx/include/mach/xc.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_XC_H
#define __ASM_ARCH_XC_H
struct xc {
int no;
unsigned int type;
unsigned int version;
void __iomem *xpec_base;
void __iomem *xmac_base;
void __iomem *sram_base;
int irq;
struct device *dev;
};
int xc_reset(struct xc *x);
int xc_stop(struct xc* x);
int xc_start(struct xc *x);
int xc_running(struct xc *x);
int xc_request_firmware(struct xc* x);
struct xc* request_xc(int xcno, struct device *dev);
void free_xc(struct xc *x);
#endif /* __ASM_ARCH_XC_H */
/*
* arch/arm/mach-netx/nxdb500.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
static struct clcd_panel qvga = {
.mode = {
.name = "QVGA",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 187617,
.left_margin = 6,
.right_margin = 26,
.upper_margin = 0,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = 16,
.cntl = CNTL_LCDTFT | CNTL_BGR,
.bpp = 16,
.grayscale = 0,
};
static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
var->green.length = 5;
var->green.msb_right = 0;
return clcdfb_check(fb, var);
}
static int nxdb500_clcd_setup(struct clcd_fb *fb)
{
unsigned int val;
fb->fb.var.green.length = 5;
fb->fb.var.green.msb_right = 0;
/* enable asic control */
val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
writel(3, NETX_SYSTEM_IOC_CR);
val = readl(NETX_PIO_OUTPIO);
writel(val | 1, NETX_PIO_OUTPIO);
val = readl(NETX_PIO_OEPIO);
writel(val | 1, NETX_PIO_OEPIO);
return netx_clcd_setup(fb);
}
static struct clcd_board clcd_data = {
.name = "netX",
.check = nxdb500_check,
.decode = clcdfb_decode,
.enable = netx_clcd_enable,
.setup = nxdb500_clcd_setup,
.mmap = netx_clcd_mmap,
.remove = netx_clcd_remove,
};
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device netx_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device netx_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct resource netx_uart1_resources[] = {
[0] = {
.start = 0x00100A40,
.end = 0x00100A7F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART1),
.end = (NETX_IRQ_UART1),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart1_device = {
.name = "netx-uart",
.id = 1,
.num_resources = ARRAY_SIZE(netx_uart1_resources),
.resource = netx_uart1_resources,
};
static struct resource netx_uart2_resources[] = {
[0] = {
.start = 0x00100A80,
.end = 0x00100ABF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART2),
.end = (NETX_IRQ_UART2),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart2_device = {
.name = "netx-uart",
.id = 2,
.num_resources = ARRAY_SIZE(netx_uart2_resources),
.resource = netx_uart2_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_eth0_device,
&netx_eth1_device,
&netx_uart0_device,
&netx_uart1_device,
&netx_uart2_device,
};
static void __init nxdb500_init(void)
{
netx_fb_init(&clcd_data, &qvga);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxdb500_init,
.restart = netx_restart,
MACHINE_END
/*
* arch/arm/mach-netx/nxdkn.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device nxdkn_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device nxdkn_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct platform_device *devices[] __initdata = {
&nxdkn_eth0_device,
&nxdkn_eth1_device,
&netx_uart0_device,
};
static void __init nxdkn_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxdkn_init,
.restart = netx_restart,
MACHINE_END
/*
* arch/arm/mach-netx/nxeb500hmi.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
static struct clcd_panel qvga = {
.mode = {
.name = "QVGA",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 187617,
.left_margin = 6,
.right_margin = 26,
.upper_margin = 0,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = 16,
.cntl = CNTL_LCDTFT | CNTL_BGR,
.bpp = 16,
.grayscale = 0,
};
static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
var->green.length = 5;
var->green.msb_right = 0;
return clcdfb_check(fb, var);
}
static int nxeb500hmi_clcd_setup(struct clcd_fb *fb)
{
unsigned int val;
fb->fb.var.green.length = 5;
fb->fb.var.green.msb_right = 0;
/* enable asic control */
val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
writel(3, NETX_SYSTEM_IOC_CR);
/* GPIO 14 is used for display enable on newer boards */
writel(9, NETX_GPIO_CFG(14));
val = readl(NETX_PIO_OUTPIO);
writel(val | 1, NETX_PIO_OUTPIO);
val = readl(NETX_PIO_OEPIO);
writel(val | 1, NETX_PIO_OEPIO);
return netx_clcd_setup(fb);
}
static struct clcd_board clcd_data = {
.name = "netX",
.check = nxeb500hmi_check,
.decode = clcdfb_decode,
.enable = netx_clcd_enable,
.setup = nxeb500hmi_clcd_setup,
.mmap = netx_clcd_mmap,
.remove = netx_clcd_remove,
};
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device netx_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device netx_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_cf_resources[] = {
[0] = {
.start = 0x20000000,
.end = 0x25ffffff,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
},
};
static struct platform_device netx_cf_device = {
.name = "netx-cf",
.id = 0,
.resource = netx_cf_resources,
.num_resources = ARRAY_SIZE(netx_cf_resources),
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_eth0_device,
&netx_eth1_device,
&netx_cf_device,
&netx_uart0_device,
};
static void __init nxeb500hmi_init(void)
{
netx_fb_init(&clcd_data, &qvga);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxeb500hmi_init,
.restart = netx_restart,
MACHINE_END
/*
* arch/arm/mach-netx/pfifo.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/netx-regs.h>
#include <mach/pfifo.h>
static DEFINE_MUTEX(pfifo_lock);
static unsigned int pfifo_used = 0;
int pfifo_request(unsigned int pfifo_mask)
{
int err = 0;
unsigned int val;
mutex_lock(&pfifo_lock);
if (pfifo_mask & pfifo_used) {
err = -EBUSY;
goto out;
}
pfifo_used |= pfifo_mask;
val = readl(NETX_PFIFO_RESET);
writel(val | pfifo_mask, NETX_PFIFO_RESET);
writel(val, NETX_PFIFO_RESET);
out:
mutex_unlock(&pfifo_lock);
return err;
}
void pfifo_free(unsigned int pfifo_mask)
{
mutex_lock(&pfifo_lock);
pfifo_used &= ~pfifo_mask;
mutex_unlock(&pfifo_lock);
}
EXPORT_SYMBOL(pfifo_push);
EXPORT_SYMBOL(pfifo_pop);
EXPORT_SYMBOL(pfifo_fill_level);
EXPORT_SYMBOL(pfifo_empty);
EXPORT_SYMBOL(pfifo_request);
EXPORT_SYMBOL(pfifo_free);
/*
* arch/arm/mach-netx/time.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
#define NETX_CLOCK_FREQ 100000000
#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
static inline void timer_shutdown(struct clock_event_device *evt)
{
/* disable timer */
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
}
static int netx_shutdown(struct clock_event_device *evt)
{
timer_shutdown(evt);
return 0;
}
static int netx_set_oneshot(struct clock_event_device *evt)
{
u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
timer_shutdown(evt);
writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
return 0;
}
static int netx_set_periodic(struct clock_event_device *evt)
{
u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
timer_shutdown(evt);
writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
return 0;
}
static int netx_set_next_event(unsigned long evt,
struct clock_event_device *clk)
{
writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
return 0;
}
static struct clock_event_device netx_clockevent = {
.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = netx_set_next_event,
.set_state_shutdown = netx_shutdown,
.set_state_periodic = netx_set_periodic,
.set_state_oneshot = netx_set_oneshot,
.tick_resume = netx_shutdown,
};
/*
* IRQ handler for the timer
*/
static irqreturn_t
netx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &netx_clockevent;
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = netx_timer_interrupt,
};
/*
* Set up timer interrupt
*/
void __init netx_timer_init(void)
{
/* disable timer initially */
writel(0, NETX_GPIO_COUNTER_CTRL(0));
/* Reset the timer value to zero */
writel(0, NETX_GPIO_COUNTER_CURRENT(0));
writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
/* Enable the interrupt in the specific timer
* register and start timer
*/
writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(0));
setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
/* Setup timer one for clocksource */
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
"netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
netx_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
0xa00, 0xfffffffe);
}
/*
* arch/arm/mach-netx/xc.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/netx-regs.h>
#include <mach/xc.h>
static DEFINE_MUTEX(xc_lock);
static int xc_in_use = 0;
struct fw_desc {
unsigned int ofs;
unsigned int size;
unsigned int patch_ofs;
unsigned int patch_entries;
};
struct fw_header {
unsigned int magic;
unsigned int type;
unsigned int version;
unsigned int reserved[5];
struct fw_desc fw_desc[3];
} __attribute__ ((packed));
int xc_stop(struct xc *x)
{
writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
return 0;
}
int xc_start(struct xc *x)
{
writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
return 0;
}
int xc_running(struct xc *x)
{
return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC)
|| (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC)
|| (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ?
0 : 1;
}
int xc_reset(struct xc *x)
{
writel(0, x->xpec_base + NETX_XPEC_PC_OFS);
return 0;
}
static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
{
if (adr >= NETX_PA_XMAC(x->no) &&
adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE)
return 0;
if (adr >= NETX_PA_XPEC(x->no) &&
adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE)
return 0;
dev_err(x->dev, "Illegal pointer in firmware found. aborting\n");
return -1;
}
static int xc_patch(struct xc *x, const void *patch, int count)
{
unsigned int val, adr;
const unsigned int *data = patch;
int i;
for (i = 0; i < count; i++) {
adr = *data++;
val = *data++;
if (xc_check_ptr(x, adr, 4) < 0)
return -EINVAL;
writel(val, (void __iomem *)io_p2v(adr));
}
return 0;
}
int xc_request_firmware(struct xc *x)
{
int ret;
char name[16];
const struct firmware *fw;
struct fw_header *head;
unsigned int size;
int i;
const void *src;
unsigned long dst;
sprintf(name, "xc%d.bin", x->no);
ret = request_firmware(&fw, name, x->dev);
if (ret < 0) {
dev_err(x->dev, "request_firmware failed\n");
return ret;
}
head = (struct fw_header *)fw->data;
if (head->magic != 0x4e657458) {
if (head->magic == 0x5874654e) {
dev_err(x->dev,
"firmware magic is 'XteN'. Endianness problems?\n");
ret = -ENODEV;
goto exit_release_firmware;
}
dev_err(x->dev, "unrecognized firmware magic 0x%08x\n",
head->magic);
ret = -ENODEV;
goto exit_release_firmware;
}
x->type = head->type;
x->version = head->version;
ret = -EINVAL;
for (i = 0; i < 3; i++) {
src = fw->data + head->fw_desc[i].ofs;
dst = *(unsigned int *)src;
src += sizeof (unsigned int);
size = head->fw_desc[i].size - sizeof (unsigned int);
if (xc_check_ptr(x, dst, size))
goto exit_release_firmware;
memcpy((void *)io_p2v(dst), src, size);
src = fw->data + head->fw_desc[i].patch_ofs;
size = head->fw_desc[i].patch_entries;
ret = xc_patch(x, src, size);
if (ret < 0)
goto exit_release_firmware;
}
ret = 0;
exit_release_firmware:
release_firmware(fw);
return ret;
}
struct xc *request_xc(int xcno, struct device *dev)
{
struct xc *x = NULL;
mutex_lock(&xc_lock);
if (xcno > 3)
goto exit;
if (xc_in_use & (1 << xcno))
goto exit;
x = kmalloc(sizeof (struct xc), GFP_KERNEL);
if (!x)
goto exit;
if (!request_mem_region
(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_free;
if (!request_mem_region
(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_release_1;
if (!request_mem_region
(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_release_2;
x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno));
x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
if (!x->sram_base)
goto exit_release_3;
x->irq = NETX_IRQ_XPEC(xcno);
x->no = xcno;
x->dev = dev;
xc_in_use |= (1 << xcno);
goto exit;
exit_release_3:
release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
exit_release_2:
release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
exit_release_1:
release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
exit_free:
kfree(x);
x = NULL;
exit:
mutex_unlock(&xc_lock);
return x;
}
void free_xc(struct xc *x)
{
int xcno = x->no;
mutex_lock(&xc_lock);
iounmap(x->sram_base);
release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
xc_in_use &= ~(1 << x->no);
kfree(x);
mutex_unlock(&xc_lock);
}
EXPORT_SYMBOL(free_xc);
EXPORT_SYMBOL(request_xc);
EXPORT_SYMBOL(xc_request_firmware);
EXPORT_SYMBOL(xc_reset);
EXPORT_SYMBOL(xc_running);
EXPORT_SYMBOL(xc_start);
EXPORT_SYMBOL(xc_stop);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment