Commit cebadc5c authored by Alan Cox's avatar Alan Cox Committed by James Bottomley

[SCSI] ppa: coding police and printk levels

Add printk levels
Clean up some oddities of formatting
Fix goto labels
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 75a1099c
......@@ -129,11 +129,11 @@ static inline int ppa_proc_write(ppa_struct *dev, char *buffer, int length)
if ((length > 10) && (strncmp(buffer, "recon_tmo=", 10) == 0)) {
x = simple_strtoul(buffer + 10, NULL, 0);
dev->recon_tmo = x;
printk("ppa: recon_tmo set to %ld\n", x);
printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x);
return length;
}
printk("ppa /proc: invalid variable\n");
return (-EINVAL);
printk(KERN_WARNING "ppa /proc: invalid variable\n");
return -EINVAL;
}
static int ppa_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout)
......@@ -216,7 +216,7 @@ static unsigned char ppa_wait(ppa_struct *dev)
/* Counter expired - Time out occurred */
ppa_fail(dev, DID_TIME_OUT);
printk("ppa timeout in ppa_wait\n");
printk(KERN_WARNING "ppa timeout in ppa_wait\n");
return 0; /* command timed out */
}
......@@ -248,7 +248,7 @@ static inline void ecp_sync(ppa_struct *dev)
return;
udelay(5);
}
printk("ppa: ECP sync failed as data still present in FIFO.\n");
printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n");
}
}
......@@ -328,7 +328,7 @@ static int ppa_out(ppa_struct *dev, char *buffer, int len)
break;
default:
printk("PPA: bug in ppa_out()\n");
printk(KERN_ERR "PPA: bug in ppa_out()\n");
r = 0;
}
return r;
......@@ -381,7 +381,7 @@ static int ppa_in(ppa_struct *dev, char *buffer, int len)
break;
default:
printk("PPA: bug in ppa_ins()\n");
printk(KERN_ERR "PPA: bug in ppa_ins()\n");
r = 0;
break;
}
......@@ -633,7 +633,7 @@ static void ppa_interrupt(struct work_struct *work)
struct scsi_cmnd *cmd = dev->cur_cmd;
if (!cmd) {
printk("PPA: bug in ppa_interrupt\n");
printk(KERN_ERR "PPA: bug in ppa_interrupt\n");
return;
}
if (ppa_engine(dev, cmd)) {
......@@ -646,31 +646,31 @@ static void ppa_interrupt(struct work_struct *work)
case DID_OK:
break;
case DID_NO_CONNECT:
printk("ppa: no device at SCSI ID %i\n", cmd->device->target);
printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", cmd->device->target);
break;
case DID_BUS_BUSY:
printk("ppa: BUS BUSY - EPP timeout detected\n");
printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n");
break;
case DID_TIME_OUT:
printk("ppa: unknown timeout\n");
printk(KERN_DEBUG "ppa: unknown timeout\n");
break;
case DID_ABORT:
printk("ppa: told to abort\n");
printk(KERN_DEBUG "ppa: told to abort\n");
break;
case DID_PARITY:
printk("ppa: parity error (???)\n");
printk(KERN_DEBUG "ppa: parity error (???)\n");
break;
case DID_ERROR:
printk("ppa: internal driver error\n");
printk(KERN_DEBUG "ppa: internal driver error\n");
break;
case DID_RESET:
printk("ppa: told to reset device\n");
printk(KERN_DEBUG "ppa: told to reset device\n");
break;
case DID_BAD_INTR:
printk("ppa: bad interrupt (???)\n");
printk(KERN_WARNING "ppa: bad interrupt (???)\n");
break;
default:
printk("ppa: bad return code (%02x)\n",
printk(KERN_WARNING "ppa: bad return code (%02x)\n",
(cmd->result >> 16) & 0xff);
}
#endif
......@@ -724,8 +724,7 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
if (retv) {
if (time_after(jiffies, dev->jstart + (1 * HZ))) {
printk
("ppa: Parallel port cable is unplugged!!\n");
printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n");
ppa_fail(dev, DID_BUS_BUSY);
return 0;
} else {
......@@ -755,11 +754,9 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
case 4: /* Phase 4 - Setup scatter/gather buffers */
if (cmd->use_sg) {
/* if many buffers are available, start filling the first */
cmd->SCp.buffer =
(struct scatterlist *) cmd->request_buffer;
cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr =
page_address(cmd->SCp.buffer->page) +
cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) +
cmd->SCp.buffer->offset;
} else {
/* else fill the only available buffer */
......@@ -800,7 +797,7 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
break;
default:
printk("ppa: Invalid scsi phase\n");
printk(KERN_ERR "ppa: Invalid scsi phase\n");
}
return 0;
}
......@@ -811,7 +808,7 @@ static int ppa_queuecommand(struct scsi_cmnd *cmd,
ppa_struct *dev = ppa_dev(cmd->device->host);
if (dev->cur_cmd) {
printk("PPA: bug in ppa_queuecommand\n");
printk(KERN_ERR "PPA: bug in ppa_queuecommand\n");
return 0;
}
dev->failed = 0;
......@@ -899,7 +896,7 @@ static int device_check(ppa_struct *dev)
/* This routine looks for a device and then attempts to use EPP
to send a command. If all goes as planned then EPP is available. */
static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
int loop, old_mode, status, k, ppb = dev->base;
unsigned char l;
......@@ -909,14 +906,14 @@ static int device_check(ppa_struct *dev)
if ((ppb & 0x0007) == 0x0000)
dev->mode = PPA_EPP_32;
second_pass:
second_pass:
ppa_connect(dev, CONNECT_EPP_MAYBE);
/* Select SCSI device */
if (!ppa_select(dev, loop)) {
ppa_disconnect(dev);
continue;
}
printk("ppa: Found device at ID %i, Attempting to use %s\n",
printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n",
loop, PPA_MODE_STRING[dev->mode]);
/* Send SCSI command */
......@@ -965,7 +962,7 @@ static int device_check(ppa_struct *dev)
return -EIO;
}
ppa_disconnect(dev);
printk("ppa: Communication established with ID %i using %s\n",
printk(KERN_INFO "ppa: Communication established with ID %i using %s\n",
loop, PPA_MODE_STRING[dev->mode]);
ppa_connect(dev, CONNECT_EPP_MAYBE);
ppa_reset_pulse(ppb);
......@@ -1140,7 +1137,7 @@ static struct parport_driver ppa_driver = {
static int __init ppa_driver_init(void)
{
printk("ppa: Version %s\n", PPA_VERSION);
printk(KERN_INFO "ppa: Version %s\n", PPA_VERSION);
return parport_register_driver(&ppa_driver);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment