staging: fbtft: fix checkpatch decimal permissions error

Fix the following errors:
Use 4 digit octal (0777) not decimal permissions
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/fb_hx8340bn.c

@@ -37,7 +37,7 @@
 			"3 3 17 8 4 7 05 7 6 0 3 1 6 0 0 "
 
 static bool emulate;
-module_param(emulate, bool, 0);
+module_param(emulate, bool, 0000);
 MODULE_PARM_DESC(emulate, "Force emulation in 9-bit mode");
 
 static int init_display(struct fbtft_par *par)

drivers/staging/fbtft/fb_pcd8544.c

@@ -33,11 +33,11 @@
 #define DEFAULT_GAMMA  "40" /* gamma controls the contrast in this driver */
 
 static unsigned int tc;
-module_param(tc, uint, 0);
+module_param(tc, uint, 0000);
 MODULE_PARM_DESC(tc, "TC[1:0] Temperature coefficient: 0-3 (default: 0)");
 
 static unsigned int bs = 4;
-module_param(bs, uint, 0);
+module_param(bs, uint, 0000);
 MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");
 
 static int init_display(struct fbtft_par *par)

drivers/staging/fbtft/fb_ssd1289.c

@@ -30,7 +30,7 @@
 			"02 03 2 5 7 5 4 2 4 2"
 
 static unsigned int reg11 = 0x6040;
-module_param(reg11, uint, 0);
+module_param(reg11, uint, 0000);
 MODULE_PARM_DESC(reg11, "Register 11h value");
 
 static int init_display(struct fbtft_par *par)

drivers/staging/fbtft/fb_tls8204.c

@@ -36,7 +36,7 @@
 #define DEFAULT_GAMMA	"40"
 
 static unsigned int bs = 4;
-module_param(bs, uint, 0);
+module_param(bs, uint, 0000);
 MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");
 
 static int init_display(struct fbtft_par *par)

drivers/staging/fbtft/fb_uc1611.c

@@ -42,30 +42,30 @@
 
 /* BR -> actual ratio: 0-3 -> 5, 10, 11, 13 */
 static unsigned int ratio = 2;
-module_param(ratio, uint, 0);
+module_param(ratio, uint, 0000);
 MODULE_PARM_DESC(ratio, "BR[1:0] Bias voltage ratio: 0-3 (default: 2)");
 
 static unsigned int gain = 3;
-module_param(gain, uint, 0);
+module_param(gain, uint, 0000);
 MODULE_PARM_DESC(gain, "GN[1:0] Bias voltage gain: 0-3 (default: 3)");
 
 static unsigned int pot = 16;
-module_param(pot, uint, 0);
+module_param(pot, uint, 0000);
 MODULE_PARM_DESC(pot, "PM[6:0] Bias voltage pot.: 0-63 (default: 16)");
 
 /* TC -> % compensation per deg C: 0-3 -> -.05, -.10, -.015, -.20 */
 static unsigned int temp;
-module_param(temp, uint, 0);
+module_param(temp, uint, 0000);
 MODULE_PARM_DESC(temp, "TC[1:0] Temperature compensation: 0-3 (default: 0)");
 
 /* PC[1:0] -> LCD capacitance: 0-3 -> <20nF, 20-28 nF, 29-40 nF, 40-56 nF */
 static unsigned int load = 1;
-module_param(load, uint, 0);
+module_param(load, uint, 0000);
 MODULE_PARM_DESC(load, "PC[1:0] Panel Loading: 0-3 (default: 1)");
 
 /* PC[3:2] -> V_LCD: 0, 1, 3 -> ext., int. with ratio = 5, int. standard */
 static unsigned int pump = 3;
-module_param(pump, uint, 0);
+module_param(pump, uint, 0000);
 MODULE_PARM_DESC(pump, "PC[3:2] Pump control: 0,1,3 (default: 3)");
 
 static int init_display(struct fbtft_par *par)

drivers/staging/fbtft/fb_watterott.c

@@ -40,7 +40,7 @@
 #define COLOR_RGB565		16
 
 static short mode = 565;
-module_param(mode, short, 0);
+module_param(mode, short, 0000);
 MODULE_PARM_DESC(mode, "RGB color transfer mode: 332, 565 (default)");
 
 static void write_reg8_bus8(struct fbtft_par *par, int len, ...)

drivers/staging/fbtft/fbtft-core.c

@@ -40,7 +40,7 @@
 #include "internal.h"
 
 static unsigned long debug;
-module_param(debug, ulong, 0);
+module_param(debug, ulong, 0000);
 MODULE_PARM_DESC(debug, "override device debug level");
 
 void fbtft_dbg_hex(const struct device *dev, int groupsize,

drivers/staging/fbtft/fbtft_device.c

@@ -29,85 +29,85 @@ static struct spi_device *spi_device;
 static struct platform_device *p_device;
 
 static char *name;
-module_param(name, charp, 0);
+module_param(name, charp, 0000);
 MODULE_PARM_DESC(name, "Devicename (required). name=list => list all supported devices.");
 
 static unsigned int rotate;
-module_param(rotate, uint, 0);
+module_param(rotate, uint, 0000);
 MODULE_PARM_DESC(rotate,
 "Angle to rotate display counter clockwise: 0, 90, 180, 270");
 
 static unsigned int busnum;
-module_param(busnum, uint, 0);
+module_param(busnum, uint, 0000);
 MODULE_PARM_DESC(busnum, "SPI bus number (default=0)");
 
 static unsigned int cs;
-module_param(cs, uint, 0);
+module_param(cs, uint, 0000);
 MODULE_PARM_DESC(cs, "SPI chip select (default=0)");
 
 static unsigned int speed;
-module_param(speed, uint, 0);
+module_param(speed, uint, 0000);
 MODULE_PARM_DESC(speed, "SPI speed (override device default)");
 
 static int mode = -1;
-module_param(mode, int, 0);
+module_param(mode, int, 0000);
 MODULE_PARM_DESC(mode, "SPI mode (override device default)");
 
 static char *gpios;
-module_param(gpios, charp, 0);
+module_param(gpios, charp, 0000);
 MODULE_PARM_DESC(gpios,
 "List of gpios. Comma separated with the form: reset:23,dc:24 (when overriding the default, all gpios must be specified)");
 
 static unsigned int fps;
-module_param(fps, uint, 0);
+module_param(fps, uint, 0000);
 MODULE_PARM_DESC(fps, "Frames per second (override driver default)");
 
 static char *gamma;
-module_param(gamma, charp, 0);
+module_param(gamma, charp, 0000);
 MODULE_PARM_DESC(gamma,
 "String representation of Gamma Curve(s). Driver specific.");
 
 static int txbuflen;
-module_param(txbuflen, int, 0);
+module_param(txbuflen, int, 0000);
 MODULE_PARM_DESC(txbuflen, "txbuflen (override driver default)");
 
 static int bgr = -1;
-module_param(bgr, int, 0);
+module_param(bgr, int, 0000);
 MODULE_PARM_DESC(bgr,
 "BGR bit (supported by some drivers).");
 
 static unsigned int startbyte;
-module_param(startbyte, uint, 0);
+module_param(startbyte, uint, 0000);
 MODULE_PARM_DESC(startbyte, "Sets the Start byte used by some SPI displays.");
 
 static bool custom;
-module_param(custom, bool, 0);
+module_param(custom, bool, 0000);
 MODULE_PARM_DESC(custom, "Add a custom display device. Use speed= argument to make it a SPI device, else platform_device");
 
 static unsigned int width;
-module_param(width, uint, 0);
+module_param(width, uint, 0000);
 MODULE_PARM_DESC(width, "Display width, used with the custom argument");
 
 static unsigned int height;
-module_param(height, uint, 0);
+module_param(height, uint, 0000);
 MODULE_PARM_DESC(height, "Display height, used with the custom argument");
 
 static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0);
+module_param(buswidth, uint, 0000);
 MODULE_PARM_DESC(buswidth, "Display bus width, used with the custom argument");
 
 static s16 init[FBTFT_MAX_INIT_SEQUENCE];
 static int init_num;
-module_param_array(init, short, &init_num, 0);
+module_param_array(init, short, &init_num, 0000);
 MODULE_PARM_DESC(init, "Init sequence, used with the custom argument");
 
 static unsigned long debug;
-module_param(debug, ulong, 0);
+module_param(debug, ulong, 0000);
 MODULE_PARM_DESC(debug,
 "level: 0-7 (the remaining 29 bits is for advanced usage)");
 
 static unsigned int verbose = 3;
-module_param(verbose, uint, 0);
+module_param(verbose, uint, 0000);
 MODULE_PARM_DESC(verbose,
 "0 silent, >0 show gpios, >1 show devices, >2 show devices before (default=3)");