Commit cef622d7 authored by Joonas Lahtinen's avatar Joonas Lahtinen

Merge tag 'topic/phy-compliance-2020-04-08' of...

Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued

Topic pull request for topic/phy-compliance:
- Standardize DP_PHY_TEST_PATTERN name.
- Add support for setting/getting test pattern from sink.
- Implement DP PHY compliance to i915.

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efb3d0d9-2cf7-046b-3a9b-2548d086258e@linux.intel.comSigned-off-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
parents 2b703bbd 8cdf7271
......@@ -2530,7 +2530,7 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link)
/* get phy test pattern and pattern parameters from DP receiver */
core_link_read_dpcd(
link,
DP_TEST_PHY_PATTERN,
DP_PHY_TEST_PATTERN,
&dpcd_test_pattern.raw,
sizeof(dpcd_test_pattern));
core_link_read_dpcd(
......
......@@ -1535,3 +1535,97 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
return num_bpc;
}
EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
/**
* drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
* @aux: DisplayPort AUX channel
* @data: DP phy compliance test parameters.
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
struct drm_dp_phy_test_params *data)
{
int err;
u8 rate, lanes;
err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
if (err < 0)
return err;
data->link_rate = drm_dp_bw_code_to_link_rate(rate);
err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
if (err < 0)
return err;
data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
if (lanes & DP_ENHANCED_FRAME_CAP)
data->enhanced_frame_cap = true;
err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
if (err < 0)
return err;
switch (data->phy_pattern) {
case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
&data->custom80, sizeof(data->custom80));
if (err < 0)
return err;
break;
case DP_PHY_TEST_PATTERN_CP2520:
err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
&data->hbr2_reset,
sizeof(data->hbr2_reset));
if (err < 0)
return err;
}
return 0;
}
EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
/**
* drm_dp_set_phy_test_pattern() - set the pattern to the sink.
* @aux: DisplayPort AUX channel
* @data: DP phy compliance test parameters.
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
struct drm_dp_phy_test_params *data, u8 dp_rev)
{
int err, i;
u8 link_config[2];
u8 test_pattern;
link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
link_config[1] = data->num_lanes;
if (data->enhanced_frame_cap)
link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
if (err < 0)
return err;
test_pattern = data->phy_pattern;
if (dp_rev < 0x12) {
test_pattern = (test_pattern << 2) &
DP_LINK_QUAL_PATTERN_11_MASK;
err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
test_pattern);
if (err < 0)
return err;
} else {
for (i = 0; i < data->num_lanes; i++) {
err = drm_dp_dpcd_writeb(aux,
DP_LINK_QUAL_LANE0_SET + i,
test_pattern);
if (err < 0)
return err;
}
}
return 0;
}
EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
......@@ -1326,6 +1326,16 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
intel_dp->compliance.test_data.vdisplay);
seq_printf(m, "bpc: %u\n",
intel_dp->compliance.test_data.bpc);
} else if (intel_dp->compliance.test_type ==
DP_TEST_LINK_PHY_TEST_PATTERN) {
seq_printf(m, "pattern: %d\n",
intel_dp->compliance.test_data.phytest.phy_pattern);
seq_printf(m, "Number of lanes: %d\n",
intel_dp->compliance.test_data.phytest.num_lanes);
seq_printf(m, "Link Rate: %d\n",
intel_dp->compliance.test_data.phytest.link_rate);
seq_printf(m, "level: %02x\n",
intel_dp->train_set[0]);
}
} else
seq_puts(m, "0");
......@@ -1358,7 +1368,7 @@ static int i915_displayport_test_type_show(struct seq_file *m, void *data)
if (encoder && connector->status == connector_status_connected) {
intel_dp = enc_to_intel_dp(encoder);
seq_printf(m, "%02lx", intel_dp->compliance.test_type);
seq_printf(m, "%02lx\n", intel_dp->compliance.test_type);
} else
seq_puts(m, "0");
}
......
......@@ -1258,6 +1258,7 @@ struct intel_dp_compliance_data {
u8 video_pattern;
u16 hdisplay, vdisplay;
u8 bpc;
struct drm_dp_phy_test_params phytest;
};
struct intel_dp_compliance {
......
......@@ -5401,9 +5401,180 @@ static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
return test_result;
}
static u8 intel_dp_prepare_phytest(struct intel_dp *intel_dp)
{
struct drm_dp_phy_test_params *data =
&intel_dp->compliance.test_data.phytest;
if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) {
DRM_DEBUG_KMS("DP Phy Test pattern AUX read failure\n");
return DP_TEST_NAK;
}
/*
* link_mst is set to false to avoid executing mst related code
* during compliance testing.
*/
intel_dp->link_mst = false;
return DP_TEST_ACK;
}
static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv =
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_dp_phy_test_params *data =
&intel_dp->compliance.test_data.phytest;
struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
enum pipe pipe = crtc->pipe;
u32 pattern_val;
switch (data->phy_pattern) {
case DP_PHY_TEST_PATTERN_NONE:
DRM_DEBUG_KMS("Disable Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
break;
case DP_PHY_TEST_PATTERN_D10_2:
DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
break;
case DP_PHY_TEST_PATTERN_ERROR_COUNT:
DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE |
DDI_DP_COMP_CTL_SCRAMBLED_0);
break;
case DP_PHY_TEST_PATTERN_PRBS7:
DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
break;
case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
/*
* FIXME: Ideally pattern should come from DPCD 0x250. As
* current firmware of DPR-100 could not set it, so hardcoding
* now for complaince test.
*/
DRM_DEBUG_KMS("Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n");
pattern_val = 0x3e0f83e0;
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val);
pattern_val = 0x0f83e0f8;
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val);
pattern_val = 0x0000f83e;
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val);
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE |
DDI_DP_COMP_CTL_CUSTOM80);
break;
case DP_PHY_TEST_PATTERN_CP2520:
/*
* FIXME: Ideally pattern should come from DPCD 0x24A. As
* current firmware of DPR-100 could not set it, so hardcoding
* now for complaince test.
*/
DRM_DEBUG_KMS("Set HBR2 compliance Phy Test Pattern\n");
pattern_val = 0xFB;
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
pattern_val);
break;
default:
WARN(1, "Invalid Phy Test Pattern\n");
}
}
static void
intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
enum pipe pipe = crtc->pipe;
u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
trans_ddi_func_ctl_value = intel_de_read(dev_priv,
TRANS_DDI_FUNC_CTL(pipe));
trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
TGL_TRANS_DDI_PORT_MASK);
trans_conf_value &= ~PIPECONF_ENABLE;
dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
trans_ddi_func_ctl_value);
intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
}
static void
intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, uint8_t lane_cnt)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum port port = intel_dig_port->base.port;
struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
enum pipe pipe = crtc->pipe;
u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
trans_ddi_func_ctl_value = intel_de_read(dev_priv,
TRANS_DDI_FUNC_CTL(pipe));
trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
TGL_TRANS_DDI_SELECT_PORT(port);
trans_conf_value |= PIPECONF_ENABLE;
dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
trans_ddi_func_ctl_value);
}
void intel_dp_process_phy_request(struct intel_dp *intel_dp)
{
struct drm_dp_phy_test_params *data =
&intel_dp->compliance.test_data.phytest;
u8 link_status[DP_LINK_STATUS_SIZE];
if (!intel_dp_get_link_status(intel_dp, link_status)) {
DRM_DEBUG_KMS("failed to get link status\n");
return;
}
/* retrieve vswing & pre-emphasis setting */
intel_dp_get_adjust_train(intel_dp, link_status);
intel_dp_autotest_phy_ddi_disable(intel_dp);
intel_dp_set_signal_levels(intel_dp);
intel_dp_phy_pattern_update(intel_dp);
intel_dp_autotest_phy_ddi_enable(intel_dp, data->num_lanes);
drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
link_status[DP_DPCD_REV]);
}
static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
{
u8 test_result = DP_TEST_NAK;
test_result = intel_dp_prepare_phytest(intel_dp);
if (test_result != DP_TEST_ACK)
DRM_ERROR("Phy test preparation failed\n");
intel_dp_process_phy_request(intel_dp);
return test_result;
}
......
......@@ -118,6 +118,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
bool intel_digital_port_connected(struct intel_encoder *encoder);
void intel_dp_process_phy_request(struct intel_dp *intel_dp);
static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
{
......
......@@ -34,9 +34,8 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
link_status[3], link_status[4], link_status[5]);
}
static void
intel_get_adjust_train(struct intel_dp *intel_dp,
const u8 link_status[DP_LINK_STATUS_SIZE])
void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
const u8 link_status[DP_LINK_STATUS_SIZE])
{
u8 v = 0;
u8 p = 0;
......@@ -219,7 +218,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Update training set as requested by target */
intel_get_adjust_train(intel_dp, link_status);
intel_dp_get_adjust_train(intel_dp, link_status);
if (!intel_dp_update_link_train(intel_dp)) {
drm_err(&i915->drm,
"failed to update link training\n");
......@@ -338,7 +337,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
}
/* Update training set as requested by target */
intel_get_adjust_train(intel_dp, link_status);
intel_dp_get_adjust_train(intel_dp, link_status);
if (!intel_dp_update_link_train(intel_dp)) {
drm_err(&i915->drm,
"failed to update link training\n");
......
......@@ -6,8 +6,12 @@
#ifndef __INTEL_DP_LINK_TRAINING_H__
#define __INTEL_DP_LINK_TRAINING_H__
#include <drm/drm_dp_helper.h>
struct intel_dp;
void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
const u8 link_status[DP_LINK_STATUS_SIZE]);
void intel_dp_start_link_train(struct intel_dp *intel_dp);
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
......
......@@ -9886,6 +9886,24 @@ enum skl_power_gate {
#define DDI_BUF_BALANCE_LEG_ENABLE (1 << 31)
#define DDI_BUF_TRANS_HI(port, i) _MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4)
/* DDI DP Compliance Control */
#define _DDI_DP_COMP_CTL_A 0x605F0
#define _DDI_DP_COMP_CTL_B 0x615F0
#define DDI_DP_COMP_CTL(pipe) _MMIO_PIPE(pipe, _DDI_DP_COMP_CTL_A, _DDI_DP_COMP_CTL_B)
#define DDI_DP_COMP_CTL_ENABLE (1 << 31)
#define DDI_DP_COMP_CTL_D10_2 (0 << 28)
#define DDI_DP_COMP_CTL_SCRAMBLED_0 (1 << 28)
#define DDI_DP_COMP_CTL_PRBS7 (2 << 28)
#define DDI_DP_COMP_CTL_CUSTOM80 (3 << 28)
#define DDI_DP_COMP_CTL_HBR2 (4 << 28)
#define DDI_DP_COMP_CTL_SCRAMBLED_1 (5 << 28)
#define DDI_DP_COMP_CTL_HBR2_RESET (0xFC << 0)
/* DDI DP Compliance Pattern */
#define _DDI_DP_COMP_PAT_A 0x605F4
#define _DDI_DP_COMP_PAT_B 0x615F4
#define DDI_DP_COMP_PAT(pipe, i) _MMIO(_PIPE(pipe, _DDI_DP_COMP_PAT_A, _DDI_DP_COMP_PAT_B) + (i) * 4)
/* Sideband Interface (SBI) is programmed indirectly, via
* SBI_ADDR, which contains the register offset; and SBI_DATA,
* which contains the payload */
......
......@@ -701,7 +701,16 @@
# define DP_TEST_CRC_SUPPORTED (1 << 5)
# define DP_TEST_COUNT_MASK 0xf
#define DP_TEST_PHY_PATTERN 0x248
#define DP_PHY_TEST_PATTERN 0x248
# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
# define DP_PHY_TEST_PATTERN_NONE 0x0
# define DP_PHY_TEST_PATTERN_D10_2 0x1
# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
# define DP_PHY_TEST_PATTERN_PRBS7 0x3
# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
# define DP_PHY_TEST_PATTERN_CP2520 0x5
#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
......@@ -1735,4 +1744,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
#endif
/**
* struct drm_dp_phy_test_params - DP Phy Compliance parameters
* @link_rate: Requested Link rate from DPCD 0x219
* @num_lanes: Number of lanes requested by sing through DPCD 0x220
* @phy_pattern: DP Phy test pattern from DPCD 0x248
* @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
* @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
* @enhanced_frame_cap: flag for enhanced frame capability.
*/
struct drm_dp_phy_test_params {
int link_rate;
u8 num_lanes;
u8 phy_pattern;
u8 hbr2_reset[2];
u8 custom80[10];
bool enhanced_frame_cap;
};
int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
struct drm_dp_phy_test_params *data);
int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
struct drm_dp_phy_test_params *data, u8 dp_rev);
#endif /* _DRM_DP_HELPER_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment