ath9k: Add debugfs support for mac/baseband samples

This patch keep track of number of samples that includes
DMA debugs registers, PCU observe, CR, channel noise,
cycle conters, noisefloor history buffer and last N number
of tx and rx descriptor status. These samples are grouped
in table manner which dumping in debgufs.

Debugfs file location:
    <debugfs_mnt>/ieee80211/phy#/ath9k/samples
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/debug.h

@@ -177,14 +177,57 @@ struct ath_stats {
 	struct ath_rx_stats rxstats;
 };
 
+#define ATH_DBG_MAX_SAMPLES	10
+struct ath_dbg_bb_mac_samp {
+	u32 dma_dbg_reg_vals[ATH9K_NUM_DMA_DEBUG_REGS];
+	u32 pcu_obs, pcu_cr, noise;
+	struct {
+		u64 jiffies;
+		int8_t rssi_ctl0;
+		int8_t rssi_ctl1;
+		int8_t rssi_ctl2;
+		int8_t rssi_ext0;
+		int8_t rssi_ext1;
+		int8_t rssi_ext2;
+		int8_t rssi;
+		bool isok;
+		u8 rts_fail_cnt;
+		u8 data_fail_cnt;
+		u8 rateindex;
+		u8 qid;
+		u8 tid;
+	} ts[ATH_DBG_MAX_SAMPLES];
+	struct {
+		u64 jiffies;
+		int8_t rssi_ctl0;
+		int8_t rssi_ctl1;
+		int8_t rssi_ctl2;
+		int8_t rssi_ext0;
+		int8_t rssi_ext1;
+		int8_t rssi_ext2;
+		int8_t rssi;
+		bool is_mybeacon;
+		u8 antenna;
+		u8 rate;
+	} rs[ATH_DBG_MAX_SAMPLES];
+	struct ath_cycle_counters cc;
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+};
+
 struct ath9k_debug {
 	struct dentry *debugfs_phy;
 	u32 regidx;
 	struct ath_stats stats;
+	spinlock_t samp_lock;
+	struct ath_dbg_bb_mac_samp bb_mac_samp[ATH_DBG_MAX_SAMPLES];
+	u8 sampidx;
+	u8 tsidx;
+	u8 rsidx;
 };
 
 int ath9k_init_debug(struct ath_hw *ah);
 
+void ath9k_debug_samp_bb_mac(struct ath_softc *sc);
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
 void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
 		       struct ath_tx_status *ts, struct ath_txq *txq);
@@ -197,6 +240,10 @@ static inline int ath9k_init_debug(struct ath_hw *ah)
 	return 0;
 }
 
+static inline void ath9k_debug_samp_bb_mac(struct ath_softc *sc)
+{
+}
+
 static inline void ath_debug_stat_interrupt(struct ath_softc *sc,
 					    enum ath9k_int status)
 {

drivers/net/wireless/ath/ath9k/init.c

@@ -572,6 +572,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	mutex_init(&sc->mutex);
 #ifdef CONFIG_ATH9K_DEBUGFS
 	spin_lock_init(&sc->nodes_lock);
+	spin_lock_init(&sc->debug.samp_lock);
 	INIT_LIST_HEAD(&sc->nodes);
 #endif
 	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);

drivers/net/wireless/ath/ath9k/mac.h

@@ -146,6 +146,7 @@ struct ath_rx_status {
 	u8 rs_moreaggr;
 	u8 rs_num_delims;
 	u8 rs_flags;
+	bool is_mybeacon;
 	u32 evm0;
 	u32 evm1;
 	u32 evm2;

drivers/net/wireless/ath/ath9k/main.c

@@ -546,6 +546,7 @@ void ath_ani_calibrate(unsigned long data)
 	* The interval must be the shortest necessary to satisfy ANI,
 	* short calibration and long calibration.
 	*/
+	ath9k_debug_samp_bb_mac(sc);
 	cal_interval = ATH_LONG_CALINTERVAL;
 	if (sc->sc_ah->config.enable_ani)
 		cal_interval = min(cal_interval,
@@ -978,6 +979,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 
 	sc->hw_busy_count = 0;
 
+	ath9k_debug_samp_bb_mac(sc);
 	/* Stop ANI */
 
 	del_timer_sync(&common->ani.timer);

drivers/net/wireless/ath/ath9k/recv.c

@@ -952,23 +952,12 @@ static void ath9k_process_rssi(struct ath_common *common,
 	struct ath_softc *sc = hw->priv;
 	struct ath_hw *ah = common->ah;
 	int last_rssi;
-	__le16 fc;
 
-	if ((ah->opmode != NL80211_IFTYPE_STATION) &&
-	    (ah->opmode != NL80211_IFTYPE_ADHOC))
+	if (!rx_stats->is_mybeacon ||
+	    ((ah->opmode != NL80211_IFTYPE_STATION) &&
+	     (ah->opmode != NL80211_IFTYPE_ADHOC)))
 		return;
 
-	fc = hdr->frame_control;
-	if (!ieee80211_is_beacon(fc) ||
-	    compare_ether_addr(hdr->addr3, common->curbssid)) {
-		/* TODO:  This doesn't work well if you have stations
-		 * associated to two different APs because curbssid
-		 * is just the last AP that any of the stations associated
-		 * with.
-		 */
-		return;
-	}
-
 	if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr)
 		ATH_RSSI_LPF(sc->last_rssi, rx_stats->rs_rssi);
 
@@ -1838,6 +1827,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 
 		hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len);
 		rxs = IEEE80211_SKB_RXCB(hdr_skb);
+		if (ieee80211_is_beacon(hdr->frame_control) &&
+		    !compare_ether_addr(hdr->addr3, common->curbssid))
+			rs.is_mybeacon = true;
+		else
+			rs.is_mybeacon = false;
 
 		ath_debug_stat_rx(sc, &rs);