Merge tag 'oxnas-arm-soc-dt-for-4.11' of https://github.com/OXNAS/linux into next/dt

- Add dt-bindings includes for OX820 and OX810SE dtsi
- Replace reset and clock magic numbers for OX820 and OX810SE

* tag 'oxnas-arm-soc-dt-for-4.11' of https://github.com/OXNAS/linux:
  ARM: dts: OX820: Update with dt-bindings includes
  ARM: dts: OX810: Update with dt-bindings includes
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/ox810se.dtsi

@@ -7,6 +7,8 @@
  */
 
 /include/ "skeleton.dtsi"
+#include <dt-bindings/clock/oxsemi,ox810se.h>
+#include <dt-bindings/reset/oxsemi,ox810se.h>
 
 / {
 	compatible = "oxsemi,ox810se";
@@ -242,7 +244,7 @@ uart0: serial@200000 {
 			       current-speed = <115200>;
 			       no-loopback-test;
 			       status = "disabled";
-			       resets = <&reset 17>;
+			       resets = <&reset RESET_UART1>;
 			};
 
 			uart1: serial@300000 {
@@ -256,7 +258,7 @@ uart1: serial@300000 {
 			       current-speed = <115200>;
 			       no-loopback-test;
 			       status = "disabled";
-			       resets = <&reset 18>;
+			       resets = <&reset RESET_UART2>;
 			};
 
 			uart2: serial@900000 {
@@ -270,7 +272,7 @@ uart2: serial@900000 {
 			       current-speed = <115200>;
 			       no-loopback-test;
 			       status = "disabled";
-			       resets = <&reset 22>;
+			       resets = <&reset RESET_UART3>;
 			};
 
 			uart3: serial@a00000 {
@@ -284,7 +286,7 @@ uart3: serial@a00000 {
 			       current-speed = <115200>;
 			       no-loopback-test;
 			       status = "disabled";
-			       resets = <&reset 23>;
+			       resets = <&reset RESET_UART4>;
 			};
 		};
 

arch/arm/boot/dts/ox820.dtsi

@@ -8,6 +8,8 @@
 
 /include/ "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/oxsemi,ox820.h>
+#include <dt-bindings/reset/oxsemi,ox820.h>
 
 / {
 	compatible = "oxsemi,ox820";
@@ -83,8 +85,8 @@ soc {
 		nandc: nand-controller@41000000 {
 			compatible = "oxsemi,ox820-nand";
 			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk 11>;
-			resets = <&reset 15>;
+			clocks = <&stdclk CLK_820_NAND>;
+			resets = <&reset RESET_NAND>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -99,9 +101,9 @@ etha: ethernet@40400000 {
 			mac-address = [000000000000]; /* Filled in by U-Boot */
 			phy-mode = "rgmii";
 
-			clocks = <&stdclk 9>, <&gmacclk>;
+			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
 			clock-names = "gmac", "stmmaceth";
-			resets = <&reset 6>;
+			resets = <&reset RESET_MAC>;
 
 			/* Regmap for sys registers */
 			oxsemi,sys-ctrl = <&sys>;
@@ -208,7 +210,7 @@ uart0: serial@200000 {
 			       no-loopback-test;
 			       status = "disabled";
 			       clocks = <&sysclk>;
-			       resets = <&reset 17>;
+			       resets = <&reset RESET_UART1>;
 			};
 
 			uart1: serial@300000 {
@@ -222,7 +224,7 @@ uart1: serial@300000 {
 			       no-loopback-test;
 			       status = "disabled";
 			       clocks = <&sysclk>;
-			       resets = <&reset 18>;
+			       resets = <&reset RESET_UART2>;
 			};
 
 			rps@400000 {