ARM: dts: Add pin-control related changes for Arndale board

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -69,15 +69,12 @@ dwmmc_0: dwmmc0@12200000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
 		};
 	};
 
@@ -93,14 +90,12 @@ dwmmc_2: dwmmc2@12220000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
-			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
 		};
 	};