ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address

The NAND controller device node was inserted into the wrong position,
probably due to a rebase or merge, as the file's structure does not
provide enough context for git to accurately match the previous device
node block.

Fixes: d7b843df ("ARM: dts: sun8i: add NAND controller node for A23/A33")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -155,6 +155,19 @@ dma: dma-controller@1c02000 {
 			#dma-cells = <1>;
 		};
 
+		nfc: nand@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -214,21 +227,6 @@ mmc2: mmc@1c11000 {
 			#size-cells = <0>;
 		};
 
-		nfc: nand@1c03000 {
-			compatible = "allwinner,sun4i-a10-nand";
-			reg = <0x01c03000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_NAND>;
-			reset-names = "ahb";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
 		usb_otg: usb@1c19000 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c19000 0x0400>;