Commit d050971c authored by Maxime Ripard's avatar Maxime Ripard Committed by Chen-Yu Tsai

ARM: sun5i: a10s-olinuxino: Enable HDMI

The A10s Olinuxino has an HDMI connector. Make sure we can use it.
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
parent 0d2c6f02
...@@ -63,6 +63,17 @@ chosen { ...@@ -63,6 +63,17 @@ chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -76,6 +87,10 @@ green { ...@@ -76,6 +87,10 @@ green {
}; };
}; };
&be0 {
status = "okay";
};
&ehci0 { &ehci0 {
status = "okay"; status = "okay";
}; };
...@@ -91,6 +106,16 @@ &emac_sram { ...@@ -91,6 +106,16 @@ &emac_sram {
status = "okay"; status = "okay";
}; };
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 { &i2c0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>; pinctrl-0 = <&i2c0_pins_a>;
...@@ -248,6 +273,10 @@ &spi2 { ...@@ -248,6 +273,10 @@ &spi2 {
status = "okay"; status = "okay";
}; };
&tcon0 {
status = "okay";
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>; pinctrl-0 = <&uart0_pins_a>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment