Commit d0a2b7af authored by Haavard Skinnemoen's avatar Haavard Skinnemoen

[AVR32] Implement platform hooks for atmel_lcdfb driver

This modifies and extends the existing lcdc platform code to support
the new atmel_lcdfb driver. The ATSTK1000 board code is set up to use
the on-board Samsung LTV350QV LCD panel.
Signed-off-by: default avatarHaavard Skinnemoen <hskinnemoen@atmel.com>
parent 78c129b9
/*
* ATSTK1000 setup code: Daughterboard interface
*
* Copyright (C) 2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
extern struct atmel_lcdfb_info atstk1000_lcdc_data;
#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
......@@ -16,6 +16,8 @@
#include <linux/types.h>
#include <linux/spi/spi.h>
#include <video/atmel_lcdc.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/arch/at32ap7000.h>
......@@ -23,6 +25,7 @@
#include <asm/arch/init.h>
#include <asm/arch/portmux.h>
#include "atstk1000.h"
#define SW2_DEFAULT /* MMCI and UART_A available */
......@@ -31,9 +34,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
static struct eth_platform_data __initdata eth_data[2];
static struct lcdc_platform_data atstk1000_fb0_data;
static struct spi_board_info spi0_board_info[] __initdata = {
{
......@@ -148,9 +149,8 @@ static int __init atstk1002_init(void)
set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
atstk1000_fb0_data.fbmem_start = fbmem_start;
atstk1000_fb0_data.fbmem_size = fbmem_size;
at32_add_device_lcdc(0, &atstk1000_fb0_data);
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size);
return 0;
}
......
......@@ -8,13 +8,56 @@
* published by the Free Software Foundation.
*/
#include <linux/bootmem.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/linkage.h>
#include <asm/setup.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
#include <asm/arch/board.h>
#include "atstk1000.h"
/* Initialized by bootloader-specific startup code. */
struct tag *bootloader_tags __initdata;
static struct fb_videomode __initdata ltv350qv_modes[] = {
{
.name = "320x240 @ 75",
.refresh = 75,
.xres = 320, .yres = 240,
.pixclock = KHZ2PICOS(6891),
.left_margin = 17, .right_margin = 33,
.upper_margin = 10, .lower_margin = 10,
.hsync_len = 16, .vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct fb_monspecs __initdata atstk1000_default_monspecs = {
.manufacturer = "SNG",
.monitor = "LTV350QV",
.modedb = ltv350qv_modes,
.modedb_len = ARRAY_SIZE(ltv350qv_modes),
.hfmin = 14820,
.hfmax = 22230,
.vfmin = 60,
.vfmax = 90,
.dclkmax = 30000000,
};
struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
| ATMEL_LCDC_INVCLK
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
| ATMEL_LCDC_MEMOR_BIG),
.default_monspecs = &atstk1000_default_monspecs,
.guard_time = 2,
};
......@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
......@@ -17,6 +18,8 @@
#include <asm/arch/portmux.h>
#include <asm/arch/sm.h>
#include <video/atmel_lcdc.h>
#include "clock.h"
#include "hmatrix.h"
#include "pio.h"
......@@ -881,20 +884,26 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
/* --------------------------------------------------------------------
* LCDC
* -------------------------------------------------------------------- */
static struct lcdc_platform_data lcdc0_data;
static struct resource lcdc0_resource[] = {
static struct atmel_lcdfb_info atmel_lcdfb0_data;
static struct resource atmel_lcdfb0_resource[] = {
{
.start = 0xff000000,
.end = 0xff000fff,
.flags = IORESOURCE_MEM,
},
IRQ(1),
{
/* Placeholder for pre-allocated fb memory */
.start = 0x00000000,
.end = 0x00000000,
.flags = 0,
},
};
DEFINE_DEV_DATA(lcdc, 0);
DEV_CLK(hclk, lcdc0, hsb, 7);
static struct clk lcdc0_pixclk = {
.name = "pixclk",
.dev = &lcdc0_device.dev,
DEFINE_DEV_DATA(atmel_lcdfb, 0);
DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
static struct clk atmel_lcdfb0_pixclk = {
.name = "lcdc_clk",
.dev = &atmel_lcdfb0_device.dev,
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
......@@ -903,13 +912,34 @@ static struct clk lcdc0_pixclk = {
};
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len)
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
struct fb_monspecs *monspecs;
struct fb_videomode *modedb;
unsigned int modedb_size;
/*
* Do a deep copy of the fb data, monspecs and modedb. Make
* sure all allocations are done before setting up the
* portmux.
*/
monspecs = kmemdup(data->default_monspecs,
sizeof(struct fb_monspecs), GFP_KERNEL);
if (!monspecs)
return NULL;
modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
if (!modedb)
goto err_dup_modedb;
monspecs->modedb = modedb;
switch (id) {
case 0:
pdev = &lcdc0_device;
pdev = &atmel_lcdfb0_device;
select_peripheral(PC(19), PERIPH_A, 0); /* CC */
select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
......@@ -942,19 +972,32 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
clk_set_parent(&lcdc0_pixclk, &pll0);
clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
break;
default:
return NULL;
goto err_invalid_id;
}
memcpy(pdev->dev.platform_data, data,
sizeof(struct lcdc_platform_data));
if (fbmem_len) {
pdev->resource[2].start = fbmem_start;
pdev->resource[2].end = fbmem_start + fbmem_len - 1;
pdev->resource[2].flags = IORESOURCE_MEM;
}
info = pdev->dev.platform_data;
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
info->default_monspecs = monspecs;
platform_device_register(pdev);
return pdev;
err_invalid_id:
kfree(modedb);
err_dup_modedb:
kfree(monspecs);
return NULL;
}
/* --------------------------------------------------------------------
......@@ -1037,8 +1080,8 @@ struct clk *at32_clock_list[] = {
&macb1_pclk,
&atmel_spi0_spi_clk,
&atmel_spi1_spi_clk,
&lcdc0_hclk,
&lcdc0_pixclk,
&atmel_lcdfb0_hck1,
&atmel_lcdfb0_pixclk,
&gclk0,
&gclk1,
&gclk2,
......@@ -1077,7 +1120,7 @@ void __init at32_clock_init(void)
genclk_init_parent(&gclk2);
genclk_init_parent(&gclk3);
genclk_init_parent(&gclk4);
genclk_init_parent(&lcdc0_pixclk);
genclk_init_parent(&atmel_lcdfb0_pixclk);
/*
* Turn on all clocks that have at least one user already, and
......
......@@ -30,11 +30,9 @@ struct spi_board_info;
struct platform_device *
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
struct lcdc_platform_data {
unsigned long fbmem_start;
unsigned long fbmem_size;
};
struct atmel_lcdfb_info;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len);
#endif /* __ASM_ARCH_BOARD_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment