Commit d0a2fba8 authored by Corey Minyard's avatar Corey Minyard Committed by Linus Torvalds

[PATCH] IPMI fixes for 2.6.0-test7

This fixes some problems with timing calculations (primarily for ia64)
and adds an operation to send panic strings to the IPMI event log on a
panic.
parent d825dc17
...@@ -24,6 +24,18 @@ config IPMI_PANIC_EVENT ...@@ -24,6 +24,18 @@ config IPMI_PANIC_EVENT
generate an IPMI event describing the panic to each interface generate an IPMI event describing the panic to each interface
registered with the message handler. registered with the message handler.
config IPMI_PANIC_STRING
bool 'Generate OEM events containing the panic string'
depends on IPMI_PANIC_EVENT
help
When a panic occurs, this will cause the IPMI message handler to
generate IPMI OEM type f0 events holding the IPMB address of the
panic generator (byte 4 of the event), a sequence number for the
string (byte 5 of the event) and part of the string (the rest of the
event). Bytes 1, 2, and 3 are the normal usage for an OEM event.
You can fetch these events and use the sequence numbers to piece the
string together.
config IPMI_DEVICE_INTERFACE config IPMI_DEVICE_INTERFACE
tristate 'Device interface for IPMI' tristate 'Device interface for IPMI'
depends on IPMI_HANDLER depends on IPMI_HANDLER
......
...@@ -169,6 +169,19 @@ struct ipmi_smi ...@@ -169,6 +169,19 @@ struct ipmi_smi
/* My LUN. This should generally stay the SMS LUN, but just in /* My LUN. This should generally stay the SMS LUN, but just in
case... */ case... */
unsigned char my_lun; unsigned char my_lun;
/* The event receiver for my BMC, only really used at panic
shutdown as a place to store this. */
unsigned char event_receiver;
unsigned char event_receiver_lun;
unsigned char local_sel_device;
unsigned char local_event_generator;
/* A cheap hack, if this is non-null and a message to an
interface comes in with a NULL user, call this routine with
it. Note that the message will still be freed by the
caller. This only works on the system interface. */
void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_smi_msg *msg);
}; };
int int
...@@ -1465,6 +1478,9 @@ static int handle_bmc_rsp(ipmi_smi_t intf, ...@@ -1465,6 +1478,9 @@ static int handle_bmc_rsp(ipmi_smi_t intf,
} }
if (!found) { if (!found) {
/* Special handling for NULL users. */
if (!recv_msg->user && intf->null_user_handler)
intf->null_user_handler(intf, msg);
/* The user for the message went away, so give up. */ /* The user for the message went away, so give up. */
ipmi_free_recv_msg(recv_msg); ipmi_free_recv_msg(recv_msg);
} else { } else {
...@@ -1733,7 +1749,7 @@ static struct timer_list ipmi_timer; ...@@ -1733,7 +1749,7 @@ static struct timer_list ipmi_timer;
/* Call every 100 ms. */ /* Call every 100 ms. */
#define IPMI_TIMEOUT_TIME 100 #define IPMI_TIMEOUT_TIME 100
#define IPMI_TIMEOUT_JIFFIES (IPMI_TIMEOUT_TIME/(1000/HZ)) #define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ)/1000)
/* Request events from the queue every second. Hopefully, in the /* Request events from the queue every second. Hopefully, in the
future, IPMI will add a way to know immediately if an event is future, IPMI will add a way to know immediately if an event is
...@@ -1813,18 +1829,48 @@ static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) ...@@ -1813,18 +1829,48 @@ static void dummy_recv_done_handler(struct ipmi_recv_msg *msg)
{ {
} }
static void send_panic_events(void) #ifdef CONFIG_IPMI_PANIC_STRING
static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
{
if ((msg->rsp[0] == (IPMI_NETFN_SENSOR_EVENT_RESPONSE << 2))
&& (msg->rsp[1] == IPMI_GET_EVENT_RECEIVER_CMD)
&& (msg->rsp[2] == IPMI_CC_NO_ERROR))
{
/* A get event receiver command, save it. */
intf->event_receiver = msg->rsp[3];
intf->event_receiver_lun = msg->rsp[4] & 0x3;
}
}
static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg)
{
if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2))
&& (msg->rsp[1] == IPMI_GET_DEVICE_ID_CMD)
&& (msg->rsp[2] == IPMI_CC_NO_ERROR))
{
/* A get device id command, save if we are an event
receiver or generator. */
intf->local_sel_device = (msg->rsp[8] >> 2) & 1;
intf->local_event_generator = (msg->rsp[8] >> 5) & 1;
}
}
#endif
static void send_panic_events(char *str)
{ {
struct ipmi_msg msg; struct ipmi_msg msg;
ipmi_smi_t intf; ipmi_smi_t intf;
unsigned char data[8]; unsigned char data[16];
int i; int i;
struct ipmi_system_interface_addr addr; struct ipmi_system_interface_addr *si;
struct ipmi_addr addr;
struct ipmi_smi_msg smi_msg; struct ipmi_smi_msg smi_msg;
struct ipmi_recv_msg recv_msg; struct ipmi_recv_msg recv_msg;
addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; si = (struct ipmi_system_interface_addr *) &addr;
addr.channel = IPMI_BMC_CHANNEL; si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
si->channel = IPMI_BMC_CHANNEL;
si->lun = 0;
/* Fill in an event telling that we have failed. */ /* Fill in an event telling that we have failed. */
msg.netfn = 0x04; /* Sensor or Event. */ msg.netfn = 0x04; /* Sensor or Event. */
...@@ -1837,12 +1883,13 @@ static void send_panic_events(void) ...@@ -1837,12 +1883,13 @@ static void send_panic_events(void)
data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */
data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */
/* These used to have the first three bytes of the panic string, /* Put a few breadcrumbs in. Hopefully later we can add more things
but not only is that not terribly useful, it's not available to make the panic events more useful. */
any more. */ if (str) {
data[3] = 0; data[3] = str[0];
data[6] = 0; data[6] = str[1];
data[7] = 0; data[7] = str[2];
}
smi_msg.done = dummy_smi_done_handler; smi_msg.done = dummy_smi_done_handler;
recv_msg.done = dummy_recv_done_handler; recv_msg.done = dummy_recv_done_handler;
...@@ -1853,10 +1900,11 @@ static void send_panic_events(void) ...@@ -1853,10 +1900,11 @@ static void send_panic_events(void)
if (intf == NULL) if (intf == NULL)
continue; continue;
/* Send the event announcing the panic. */
intf->handlers->set_run_to_completion(intf->send_info, 1); intf->handlers->set_run_to_completion(intf->send_info, 1);
i_ipmi_request(NULL, i_ipmi_request(NULL,
intf, intf,
(struct ipmi_addr *) &addr, &addr,
0, 0,
&msg, &msg,
&smi_msg, &smi_msg,
...@@ -1865,6 +1913,130 @@ static void send_panic_events(void) ...@@ -1865,6 +1913,130 @@ static void send_panic_events(void)
intf->my_address, intf->my_address,
intf->my_lun); intf->my_lun);
} }
#ifdef CONFIG_IPMI_PANIC_STRING
/* On every interface, dump a bunch of OEM event holding the
string. */
if (!str)
return;
for (i=0; i<MAX_IPMI_INTERFACES; i++) {
char *p = str;
struct ipmi_ipmb_addr *ipmb;
int j;
intf = ipmi_interfaces[i];
if (intf == NULL)
continue;
/* First job here is to figure out where to send the
OEM events. There's no way in IPMI to send OEM
events using an event send command, so we have to
find the SEL to put them in and stick them in
there. */
/* Get capabilities from the get device id. */
intf->local_sel_device = 0;
intf->local_event_generator = 0;
intf->event_receiver = 0;
/* Request the device info from the local MC. */
msg.netfn = IPMI_NETFN_APP_REQUEST;
msg.cmd = IPMI_GET_DEVICE_ID_CMD;
msg.data = NULL;
msg.data_len = 0;
intf->null_user_handler = device_id_fetcher;
i_ipmi_request(NULL,
intf,
&addr,
0,
&msg,
&smi_msg,
&recv_msg,
0,
intf->my_address,
intf->my_lun);
if (intf->local_event_generator) {
/* Request the event receiver from the local MC. */
msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST;
msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD;
msg.data = NULL;
msg.data_len = 0;
intf->null_user_handler = event_receiver_fetcher;
i_ipmi_request(NULL,
intf,
&addr,
0,
&msg,
&smi_msg,
&recv_msg,
0,
intf->my_address,
intf->my_lun);
}
intf->null_user_handler = NULL;
/* Validate the event receiver. The low bit must not
be 1 (it must be a valid IPMB address), it cannot
be zero, and it must not be my address. */
if (((intf->event_receiver & 1) == 0)
&& (intf->event_receiver != 0)
&& (intf->event_receiver != intf->my_address))
{
/* The event receiver is valid, send an IPMB
message. */
ipmb = (struct ipmi_ipmb_addr *) &addr;
ipmb->addr_type = IPMI_IPMB_ADDR_TYPE;
ipmb->channel = 0; /* FIXME - is this right? */
ipmb->lun = intf->event_receiver_lun;
ipmb->slave_addr = intf->event_receiver;
} else if (intf->local_sel_device) {
/* The event receiver was not valid (or was
me), but I am an SEL device, just dump it
in my SEL. */
si = (struct ipmi_system_interface_addr *) &addr;
si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
si->channel = IPMI_BMC_CHANNEL;
si->lun = 0;
} else
continue; /* No where to send the event. */
msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */
msg.cmd = IPMI_ADD_SEL_ENTRY_CMD;
msg.data = data;
msg.data_len = 16;
j = 0;
while (*p) {
int size = strlen(p);
if (size > 11)
size = 11;
data[0] = 0;
data[1] = 0;
data[2] = 0xf0; /* OEM event without timestamp. */
data[3] = intf->my_address;
data[4] = j++; /* sequence # */
/* Always give 11 bytes, so strncpy will fill
it with zeroes for me. */
strncpy(data+5, p, 11);
p += size;
i_ipmi_request(NULL,
intf,
&addr,
0,
&msg,
&smi_msg,
&recv_msg,
0,
intf->my_address,
intf->my_lun);
}
}
#endif /* CONFIG_IPMI_PANIC_STRING */
} }
#endif /* CONFIG_IPMI_PANIC_EVENT */ #endif /* CONFIG_IPMI_PANIC_EVENT */
...@@ -1891,7 +2063,7 @@ static int panic_event(struct notifier_block *this, ...@@ -1891,7 +2063,7 @@ static int panic_event(struct notifier_block *this,
} }
#ifdef CONFIG_IPMI_PANIC_EVENT #ifdef CONFIG_IPMI_PANIC_EVENT
send_panic_events(); send_panic_events(ptr);
#endif #endif
return NOTIFY_DONE; return NOTIFY_DONE;
......
...@@ -37,22 +37,32 @@ ...@@ -37,22 +37,32 @@
/* Various definitions for IPMI messages used by almost everything in /* Various definitions for IPMI messages used by almost everything in
the IPMI stack. */ the IPMI stack. */
#define IPMI_NETFN_APP_REQUEST 0x06 /* NetFNs and commands used inside the IPMI stack. */
#define IPMI_NETFN_APP_RESPONSE 0x07
#define IPMI_BMC_SLAVE_ADDR 0x20 #define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04
#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05
#define IPMI_GET_EVENT_RECEIVER_CMD 0x01
#define IPMI_NETFN_APP_REQUEST 0x06
#define IPMI_NETFN_APP_RESPONSE 0x07
#define IPMI_GET_DEVICE_ID_CMD 0x01 #define IPMI_GET_DEVICE_ID_CMD 0x01
#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30
#define IPMI_GET_MSG_FLAGS_CMD 0x31 #define IPMI_GET_MSG_FLAGS_CMD 0x31
#define IPMI_SEND_MSG_CMD 0x34 #define IPMI_SEND_MSG_CMD 0x34
#define IPMI_GET_MSG_CMD 0x33 #define IPMI_GET_MSG_CMD 0x33
#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e #define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e
#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
#define IPMI_NETFN_STORAGE_REQUEST 0x0a
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
/* The default slave address */
#define IPMI_BMC_SLAVE_ADDR 0x20
#define IPMI_MAX_MSG_LENGTH 80 #define IPMI_MAX_MSG_LENGTH 80
#define IPMI_CC_NO_ERROR 0
#endif /* __LINUX_IPMI_MSGDEFS_H */ #endif /* __LINUX_IPMI_MSGDEFS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment