Skip to content

L
linux
Commit d0b8a6f9 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller
Browse files
Options

bnx2x: sfp+ Tx fault detection added 

Adds the ability to identify sfp+ modules' Tx fault, and when such
occur shut down the link.
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6648bd7e
Hide whitespace changes
Inline Side-by-side
Showing with 99 additions and 16 deletions
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
View file @ d0b8a6f9
......@@ -1150,6 +1150,7 @@ struct drv_port_mb {
u32 link_status;
/* Driver should update this field on any link change event */
#define LINK_STATUS_NONE (0<<0)
#define LINK_STATUS_LINK_FLAG_MASK 0x00000001
#define LINK_STATUS_LINK_UP 0x00000001
#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E
......@@ -1207,6 +1208,7 @@ struct drv_port_mb {
#define LINK_STATUS_PFC_ENABLED 0x20000000
#define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000
#define LINK_STATUS_SFP_TX_FAULT 0x80000000
u32 port_stx;
......
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
View file @ d0b8a6f9
......@@ -4746,6 +4746,8 @@ void bnx2x_sync_link(struct link_params *params,
vars->mac_type = MAC_TYPE_NONE;
if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
if (vars->link_status & LINK_STATUS_SFP_TX_FAULT)
vars->phy_flags |= PHY_SFP_TX_FAULT_FLAG;
}
}
......@@ -12925,30 +12927,41 @@ static void bnx2x_check_over_curr(struct link_params *params,
vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG;
}
static void bnx2x_analyze_link_error(struct link_params *params,
struct link_vars *vars, u32 lss_status,
u8 notify)
/* Returns 0 if no change occured since last check; 1 otherwise. */
static u8 bnx2x_analyze_link_error(struct link_params *params,
struct link_vars *vars, u32 status,
u32 phy_flag, u32 link_flag, u8 notify)
{
struct bnx2x *bp = params->bp;
/* Compare new value with previous value */
u8 led_mode;
u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
u32 old_status = (vars->phy_flags & phy_flag) ? 1 : 0;
if ((lss_status ^ half_open_conn) == 0)
return;
if ((status ^ old_status) == 0)
return 0;
/* If values differ */
DP(NETIF_MSG_LINK, "Link changed:%x %x->%x\n", vars->link_up,
half_open_conn, lss_status);
switch (phy_flag) {
case PHY_HALF_OPEN_CONN_FLAG:
DP(NETIF_MSG_LINK, "Analyze Remote Fault\n");
break;
case PHY_SFP_TX_FAULT_FLAG:
DP(NETIF_MSG_LINK, "Analyze TX Fault\n");
break;
default:
DP(NETIF_MSG_LINK, "Analyze UNKOWN\n");
}
DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
old_status, status);
/* a. Update shmem->link_status accordingly
* b. Update link_vars->link_up
*/
if (lss_status) {
DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
if (status) {
vars->link_status &= ~LINK_STATUS_LINK_UP;
vars->link_status |= link_flag;
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
vars->phy_flags |= phy_flag;
/* activate nig drain */
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 1);
......@@ -12957,10 +12970,10 @@ static void bnx2x_analyze_link_error(struct link_params *params,
*/
led_mode = LED_MODE_OFF;
} else {
DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
vars->link_status |= LINK_STATUS_LINK_UP;
vars->link_status &= ~link_flag;
vars->link_up = 1;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
vars->phy_flags &= ~phy_flag;
led_mode = LED_MODE_OPER;
/* Clear nig drain */
......@@ -12977,6 +12990,8 @@ static void bnx2x_analyze_link_error(struct link_params *params,
vars->periodic_flags |= PERIODIC_FLAGS_LINK_EVENT;
if (notify)
bnx2x_notify_link_changed(bp);
return 1;
}
/******************************************************************************
......@@ -13018,7 +13033,9 @@ int bnx2x_check_half_open_conn(struct link_params *params,
if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
lss_status = 1;
bnx2x_analyze_link_error(params, vars, lss_status, notify);
bnx2x_analyze_link_error(params, vars, lss_status,
PHY_HALF_OPEN_CONN_FLAG,
LINK_STATUS_NONE, notify);
} else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
/* Check E1X / E2 BMAC */
......@@ -13035,11 +13052,55 @@ int bnx2x_check_half_open_conn(struct link_params *params,
REG_RD_DMAE(bp, mac_base + lss_status_reg, wb_data, 2);
lss_status = (wb_data[0] > 0);
bnx2x_analyze_link_error(params, vars, lss_status, notify);
bnx2x_analyze_link_error(params, vars, lss_status,
PHY_HALF_OPEN_CONN_FLAG,
LINK_STATUS_NONE, notify);
}
return 0;
}
static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u32 cfg_pin, value = 0;
u8 led_change, port = params->port;
/* Get The SFP+ TX_Fault controlling pin ([eg]pio) */
cfg_pin = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region,
dev_info.port_hw_config[port].e3_cmn_pin_cfg)) &
PORT_HW_CFG_E3_TX_FAULT_MASK) >>
PORT_HW_CFG_E3_TX_FAULT_SHIFT;
if (bnx2x_get_cfg_pin(bp, cfg_pin, &value)) {
DP(NETIF_MSG_LINK, "Failed to read pin 0x%02x\n", cfg_pin);
return;
}
led_change = bnx2x_analyze_link_error(params, vars, value,
PHY_SFP_TX_FAULT_FLAG,
LINK_STATUS_SFP_TX_FAULT, 1);
if (led_change) {
/* Change TX_Fault led, set link status for further syncs */
u8 led_mode;
if (vars->phy_flags & PHY_SFP_TX_FAULT_FLAG) {
led_mode = MISC_REGISTERS_GPIO_HIGH;
vars->link_status |= LINK_STATUS_SFP_TX_FAULT;
} else {
led_mode = MISC_REGISTERS_GPIO_LOW;
vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT;
}
/* If module is unapproved, led should be on regardless */
if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) {
DP(NETIF_MSG_LINK, "Change TX_Fault LED: ->%x\n",
led_mode);
bnx2x_set_e3_module_fault_led(params, led_mode);
}
}
}
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
{
u16 phy_idx;
......@@ -13058,7 +13119,26 @@ void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
struct bnx2x_phy *phy = &params->phy[INT_PHY];
bnx2x_set_aer_mmd(params, phy);
bnx2x_check_over_curr(params, vars);
bnx2x_warpcore_config_runtime(phy, params, vars);
if (vars->rx_tx_asic_rst)
bnx2x_warpcore_config_runtime(phy, params, vars);
if ((REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
port_hw_config[params->port].default_cfg))
& PORT_HW_CFG_NET_SERDES_IF_MASK) ==
PORT_HW_CFG_NET_SERDES_IF_SFI) {
if (bnx2x_is_sfp_module_plugged(phy, params)) {
bnx2x_sfp_tx_fault_detection(phy, params, vars);
} else if (vars->link_status &
LINK_STATUS_SFP_TX_FAULT) {
/* Clean trail, interrupt corrects the leds */
vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT;
vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG;
/* Update link status in the shared memory */
bnx2x_update_mng(params, vars->link_status);
}
}
}
}
......
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
View file @ d0b8a6f9
......@@ -307,6 +307,7 @@ struct link_vars {
#define PHY_PHYSICAL_LINK_FLAG (1<<2)
#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
#define PHY_OVER_CURRENT_FLAG (1<<4)
#define PHY_SFP_TX_FAULT_FLAG (1<<5)
u8 mac_type;
#define MAC_TYPE_NONE 0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7