Commit d1479f61 authored by Mihail Atanassov's avatar Mihail Atanassov Committed by Liviu Dudau

drm: mali-dp: Fix smart layer not going to composition

Use rectangle 1 as a generic plane. Existing code already sets the smart
layer bounding box size + offset. The rectangles' offsets are relative
to the bounding box, so there is no need to set R1's offset (reset value
is 0), just its size which is the same as the bounding box.
Signed-off-by: default avatarMihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
parent 9a8b0a23
......@@ -83,7 +83,7 @@ static const struct malidp_layer malidp550_layers[] = {
{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE, MALIDP_DE_LG_STRIDE },
{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, 0 },
{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, MALIDP550_DE_LS_R1_STRIDE },
};
#define MALIDP_DE_DEFAULT_PREFETCH_START 5
......
......@@ -37,6 +37,8 @@
#define LAYER_V_VAL(x) (((x) & 0x1fff) << 16)
#define MALIDP_LAYER_COMP_SIZE 0x010
#define MALIDP_LAYER_OFFSET 0x014
#define MALIDP550_LS_ENABLE 0x01c
#define MALIDP550_LS_R1_IN_SIZE 0x020
/*
* This 4-entry look-up-table is used to determine the full 8-bit alpha value
......@@ -242,6 +244,11 @@ static void malidp_de_plane_update(struct drm_plane *plane,
LAYER_V_VAL(plane->state->crtc_y),
mp->layer->base + MALIDP_LAYER_OFFSET);
if (mp->layer->id == DE_SMART)
malidp_hw_write(mp->hwdev,
LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
/* first clear the rotation bits */
val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
val &= ~LAYER_ROT_MASK;
......@@ -330,9 +337,16 @@ int malidp_de_planes_init(struct drm_device *drm)
plane->hwdev = malidp->dev;
plane->layer = &map->layers[i];
/* Skip the features which the SMART layer doesn't have */
if (id == DE_SMART)
if (id == DE_SMART) {
/*
* Enable the first rectangle in the SMART layer to be
* able to use it as a drm plane.
*/
malidp_hw_write(malidp->dev, 1,
plane->layer->base + MALIDP550_LS_ENABLE);
/* Skip the features which the SMART layer doesn't have. */
continue;
}
drm_plane_create_rotation_property(&plane->base, DRM_ROTATE_0, flags);
malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
......
......@@ -84,6 +84,7 @@
/* Stride register offsets relative to Lx_BASE */
#define MALIDP_DE_LG_STRIDE 0x18
#define MALIDP_DE_LV_STRIDE0 0x18
#define MALIDP550_DE_LS_R1_STRIDE 0x28
/* macros to set values into registers */
#define MALIDP_DE_H_FRONTPORCH(x) (((x) & 0xfff) << 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment