Commit d1a1dfb2 authored by Sascha Hauer's avatar Sascha Hauer Committed by Chris Ball

mmc: mxs: use mmc_of_parse to parse devicetree properties

Use generic helper function. This also adds support for the cd-gpios and
max-frequency devicetree properties.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent abd37ccc
...@@ -76,7 +76,11 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc) ...@@ -76,7 +76,11 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
{ {
struct mxs_mmc_host *host = mmc_priv(mmc); struct mxs_mmc_host *host = mmc_priv(mmc);
struct mxs_ssp *ssp = &host->ssp; struct mxs_ssp *ssp = &host->ssp;
int present; int present, ret;
ret = mmc_gpio_get_cd(mmc);
if (ret >= 0)
return ret;
present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) & present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_CARD_DETECT); BM_SSP_STATUS_CARD_DETECT);
...@@ -564,15 +568,12 @@ static int mxs_mmc_probe(struct platform_device *pdev) ...@@ -564,15 +568,12 @@ static int mxs_mmc_probe(struct platform_device *pdev)
{ {
const struct of_device_id *of_id = const struct of_device_id *of_id =
of_match_device(mxs_mmc_dt_ids, &pdev->dev); of_match_device(mxs_mmc_dt_ids, &pdev->dev);
struct device_node *np = pdev->dev.of_node;
struct mxs_mmc_host *host; struct mxs_mmc_host *host;
struct mmc_host *mmc; struct mmc_host *mmc;
struct resource *iores; struct resource *iores;
int ret = 0, irq_err, gpio; int ret = 0, irq_err;
struct regulator *reg_vmmc; struct regulator *reg_vmmc;
enum of_gpio_flags flags;
struct mxs_ssp *ssp; struct mxs_ssp *ssp;
u32 bus_width = 0;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0); irq_err = platform_get_irq(pdev, 0);
...@@ -633,29 +634,13 @@ static int mxs_mmc_probe(struct platform_device *pdev) ...@@ -633,29 +634,13 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL; MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
of_property_read_u32(np, "bus-width", &bus_width); mmc->f_min = 400000;
if (bus_width == 4) mmc->f_max = 288000000;
mmc->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8) ret = mmc_of_parse(mmc);
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
if (of_property_read_bool(np, "broken-cd"))
mmc->caps |= MMC_CAP_NEEDS_POLL;
if (of_property_read_bool(np, "non-removable"))
mmc->caps |= MMC_CAP_NONREMOVABLE;
gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
if (gpio_is_valid(gpio)) {
ret = mmc_gpio_request_ro(mmc, gpio);
if (ret) if (ret)
goto out_clk_disable; goto out_clk_disable;
if (!(flags & OF_GPIO_ACTIVE_LOW))
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
}
if (of_property_read_bool(np, "cd-inverted"))
mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
mmc->f_min = 400000;
mmc->f_max = 288000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->max_segs = 52; mmc->max_segs = 52;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment