drm/gma500: Make all chips use gma_wait_for_vblank

Also remove the duplicated oaktrail function.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

drivers/gpu/drm/gma500/cdv_intel_dp.c

@@ -34,6 +34,7 @@
 #include "psb_drv.h"
 #include "psb_intel_drv.h"
 #include "psb_intel_reg.h"
+#include "gma_display.h"
 #include <drm/drm_dp_helper.h>
 
 #define _wait_for(COND, MS, W) ({ \
@@ -1317,7 +1318,7 @@ cdv_intel_dp_start_link_train(struct psb_intel_encoder *encoder)
 	/* Enable output, wait for it to become active */
 	REG_WRITE(intel_dp->output_reg, reg);
 	REG_READ(intel_dp->output_reg);
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	DRM_DEBUG_KMS("Link config\n");
 	/* Write the link configuration data */

drivers/gpu/drm/gma500/mdfld_intel_display.c

@@ -65,7 +65,7 @@ void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
 	}
 
 	/* FIXME JLIU7_PO */
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 	return;
 
 	/* Wait for for the pipe disable to take effect. */
@@ -93,7 +93,7 @@ void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
 	}
 
 	/* FIXME JLIU7_PO */
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 	return;
 
 	/* Wait for for the pipe enable to take effect. */
@@ -1034,7 +1034,7 @@ static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Wait for for the pipe enable to take effect. */
 	REG_WRITE(map->cntr, dev_priv->dspcntr[pipe]);
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 mrst_crtc_mode_set_exit:
 

drivers/gpu/drm/gma500/oaktrail_crtc.c

@@ -242,7 +242,7 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
 			REG_READ(map->conf);
 		}
 		/* Wait for for the pipe disable to take effect. */
-		psb_intel_wait_for_vblank(dev);
+		gma_wait_for_vblank(dev);
 
 		temp = REG_READ(map->dpll);
 		if ((temp & DPLL_VCO_ENABLE) != 0) {
@@ -484,10 +484,10 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
 
 	REG_WRITE(map->conf, pipeconf);
 	REG_READ(map->conf);
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	REG_WRITE(map->cntr, dspcntr);
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 oaktrail_crtc_mode_set_exit:
 	gma_power_end(dev);

drivers/gpu/drm/gma500/oaktrail_hdmi.c

@@ -155,12 +155,6 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
 	HDMI_READ(HDMI_HCR);
 }
 
-static void wait_for_vblank(struct drm_device *dev)
-{
-	/* Wait for 20ms, i.e. one cycle at 50hz. */
-	mdelay(20);
-}
-
 static unsigned int htotal_calculate(struct drm_display_mode *mode)
 {
 	u32 htotal, new_crtc_htotal;
@@ -372,10 +366,10 @@ int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
 
 	REG_WRITE(PCH_PIPEBCONF, pipeconf);
 	REG_READ(PCH_PIPEBCONF);
-	wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	REG_WRITE(dspcntr_reg, dspcntr);
-	wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	gma_power_end(dev);
 
@@ -459,7 +453,7 @@ void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
 			REG_READ(PCH_PIPEBCONF);
 		}
 
-		wait_for_vblank(dev);
+		gma_wait_for_vblank(dev);
 
 		/* Enable plane */
 		temp = REG_READ(DSPBCNTR);

drivers/gpu/drm/gma500/psb_intel_display.c

@@ -82,12 +82,6 @@ static void psb_intel_clock(int refclk, struct gma_clock_t *clock)
 	clock->dot = clock->vco / clock->p;
 }
 
-void psb_intel_wait_for_vblank(struct drm_device *dev)
-{
-	/* Wait for 20ms, i.e. one cycle at 50hz. */
-	mdelay(20);
-}
-
 static int psb_intel_pipe_set_base(struct drm_crtc *crtc,
 			    int x, int y, struct drm_framebuffer *old_fb)
 {
@@ -244,7 +238,7 @@ static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 		}
 
 		/* Wait for vblank for the disable to take effect. */
-		psb_intel_wait_for_vblank(dev);
+		gma_wait_for_vblank(dev);
 
 		temp = REG_READ(map->dpll);
 		if ((temp & DPLL_VCO_ENABLE) != 0) {
@@ -516,14 +510,14 @@ static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
 	REG_WRITE(map->conf, pipeconf);
 	REG_READ(map->conf);
 
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	REG_WRITE(map->cntr, dspcntr);
 
 	/* Flush the plane changes */
 	crtc_funcs->mode_set_base(crtc, x, y, old_fb);
 
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	return 0;
 }
@@ -669,12 +663,12 @@ static void psb_intel_crtc_restore(struct drm_crtc *crtc)
 	REG_WRITE(map->base, crtc_state->saveDSPBASE);
 	REG_WRITE(map->conf, crtc_state->savePIPECONF);
 
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
 	REG_WRITE(map->base, crtc_state->saveDSPBASE);
 
-	psb_intel_wait_for_vblank(dev);
+	gma_wait_for_vblank(dev);
 
 	paletteReg = map->palette;
 	for (i = 0; i < 256; ++i)

drivers/gpu/drm/gma500/psb_intel_drv.h

@@ -246,7 +246,6 @@ extern struct drm_encoder *psb_intel_best_encoder(struct drm_connector
 
 extern struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
-extern void psb_intel_wait_for_vblank(struct drm_device *dev);
 extern int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 extern struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev,

drivers/gpu/drm/gma500/psb_intel_sdvo.c

@@ -1121,7 +1121,7 @@ static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
 		if ((temp & SDVO_ENABLE) == 0)
 			psb_intel_sdvo_write_sdvox(psb_intel_sdvo, temp | SDVO_ENABLE);
 		for (i = 0; i < 2; i++)
-			psb_intel_wait_for_vblank(dev);
+			gma_wait_for_vblank(dev);
 
 		status = psb_intel_sdvo_get_trained_inputs(psb_intel_sdvo, &input1, &input2);
 		/* Warn if the device reported failure to sync.