b43: don't duplicate common PHY read/write ops

Most of the PHYs use the same way of accessing registers, so move that
code to the shared place. An exception is G-PHY which sometimes access
A-PHY regs and requires special handling.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_common.c

@@ -274,7 +274,12 @@ u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
 {
 	assert_mac_suspended(dev);
 	dev->phy.writes_counter = 0;
-	return dev->phy.ops->phy_read(dev, reg);
+
+	if (dev->phy.ops->phy_read)
+		return dev->phy.ops->phy_read(dev, reg);
+
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_PHY_DATA);
 }
 
 void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
@@ -285,7 +290,12 @@ void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
 		b43_read16(dev, B43_MMIO_PHY_VER);
 		dev->phy.writes_counter = 1;
 	}
-	dev->phy.ops->phy_write(dev, reg, value);
+
+	if (dev->phy.ops->phy_write)
+		return dev->phy.ops->phy_write(dev, reg, value);
+
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA, value);
 }
 
 void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)

drivers/net/wireless/b43/phy_ht.c

@@ -1071,18 +1071,6 @@ static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev)
  * R/W ops.
  **************************************************/
 
-static u16 b43_phy_ht_op_read(struct b43_wldev *dev, u16 reg)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	return b43_read16(dev, B43_MMIO_PHY_DATA);
-}
-
-static void b43_phy_ht_op_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	b43_write16(dev, B43_MMIO_PHY_DATA, value);
-}
-
 static void b43_phy_ht_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
 				 u16 set)
 {
@@ -1126,8 +1114,6 @@ const struct b43_phy_operations b43_phyops_ht = {
 	.free			= b43_phy_ht_op_free,
 	.prepare_structs	= b43_phy_ht_op_prepare_structs,
 	.init			= b43_phy_ht_op_init,
-	.phy_read		= b43_phy_ht_op_read,
-	.phy_write		= b43_phy_ht_op_write,
 	.phy_maskset		= b43_phy_ht_op_maskset,
 	.radio_read		= b43_phy_ht_op_radio_read,
 	.radio_write		= b43_phy_ht_op_radio_write,

drivers/net/wireless/b43/phy_lcn.c

@@ -810,18 +810,6 @@ static void b43_phy_lcn_op_adjust_txpower(struct b43_wldev *dev)
  * R/W ops.
  **************************************************/
 
-static u16 b43_phy_lcn_op_read(struct b43_wldev *dev, u16 reg)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	return b43_read16(dev, B43_MMIO_PHY_DATA);
-}
-
-static void b43_phy_lcn_op_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	b43_write16(dev, B43_MMIO_PHY_DATA, value);
-}
-
 static void b43_phy_lcn_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
 				   u16 set)
 {
@@ -855,8 +843,6 @@ const struct b43_phy_operations b43_phyops_lcn = {
 	.free			= b43_phy_lcn_op_free,
 	.prepare_structs	= b43_phy_lcn_op_prepare_structs,
 	.init			= b43_phy_lcn_op_init,
-	.phy_read		= b43_phy_lcn_op_read,
-	.phy_write		= b43_phy_lcn_op_write,
 	.phy_maskset		= b43_phy_lcn_op_maskset,
 	.radio_read		= b43_phy_lcn_op_radio_read,
 	.radio_write		= b43_phy_lcn_op_radio_write,

drivers/net/wireless/b43/phy_lp.c

@@ -1985,18 +1985,6 @@ static void lpphy_calibration(struct b43_wldev *dev)
 	b43_mac_enable(dev);
 }
 
-static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	return b43_read16(dev, B43_MMIO_PHY_DATA);
-}
-
-static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	b43_write16(dev, B43_MMIO_PHY_DATA, value);
-}
-
 static void b43_lpphy_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
 				 u16 set)
 {
@@ -2713,8 +2701,6 @@ const struct b43_phy_operations b43_phyops_lp = {
 	.free			= b43_lpphy_op_free,
 	.prepare_structs	= b43_lpphy_op_prepare_structs,
 	.init			= b43_lpphy_op_init,
-	.phy_read		= b43_lpphy_op_read,
-	.phy_write		= b43_lpphy_op_write,
 	.phy_maskset		= b43_lpphy_op_maskset,
 	.radio_read		= b43_lpphy_op_radio_read,
 	.radio_write		= b43_lpphy_op_radio_write,

drivers/net/wireless/b43/phy_n.c

@@ -6497,20 +6497,6 @@ static inline void check_phyreg(struct b43_wldev *dev, u16 offset)
 #endif /* B43_DEBUG */
 }
 
-static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
-{
-	check_phyreg(dev, reg);
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	return b43_read16(dev, B43_MMIO_PHY_DATA);
-}
-
-static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
-{
-	check_phyreg(dev, reg);
-	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
-	b43_write16(dev, B43_MMIO_PHY_DATA, value);
-}
-
 static void b43_nphy_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
 				 u16 set)
 {
@@ -6653,8 +6639,6 @@ const struct b43_phy_operations b43_phyops_n = {
 	.free			= b43_nphy_op_free,
 	.prepare_structs	= b43_nphy_op_prepare_structs,
 	.init			= b43_nphy_op_init,
-	.phy_read		= b43_nphy_op_read,
-	.phy_write		= b43_nphy_op_write,
 	.phy_maskset		= b43_nphy_op_maskset,
 	.radio_read		= b43_nphy_op_radio_read,
 	.radio_write		= b43_nphy_op_radio_write,