Commit d45622c0 authored by Sekhar Nori's avatar Sekhar Nori

ARM: davinci: board-omapl138-hawk: fix GPIO numbers for MMC/SD lookup

commit c4dc56be ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
fixed the GPIO chip name for look-up of MMC/SD CD and WP pins, but forgot
to change the GPIO numbers passed.

The GPIO numbers are not offsets from within a 32 GPIO bank. Fix the
GPIO numbers as well as remove the misleading comment.

Fixes: c4dc56be ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
Reviewed-by: default avatarDavid Lechner <david@lechnology.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent 67c6b6ff
...@@ -123,12 +123,16 @@ static const short hawk_mmcsd0_pins[] = { ...@@ -123,12 +123,16 @@ static const short hawk_mmcsd0_pins[] = {
-1 -1
}; };
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
static struct gpiod_lookup_table mmc_gpios_table = { static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0", .dev_id = "da830-mmc.0",
.table = { .table = {
/* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/ GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW), GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment