arm64: Implement pmem API support

Add a clean-to-point-of-persistence cache maintenance helper, and wire
up the basic architectural support for the pmem driver based on it.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[catalin.marinas@arm.com: move arch_*_pmem() functions to arch/arm64/mm/flush.c]
[catalin.marinas@arm.com: change dmb(sy) to dmb(osh)]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm64/Kconfig

@@ -960,6 +960,17 @@ config ARM64_UAO
 	  regular load/store instructions if the cpu does not implement the
 	  feature.
 
+config ARM64_PMEM
+	bool "Enable support for persistent memory"
+	select ARCH_HAS_PMEM_API
+	help
+	  Say Y to enable support for the persistent memory API based on the
+	  ARMv8.2 DCPoP feature.
+
+	  The feature is detected at runtime, and the kernel will use DC CVAC
+	  operations if DC CVAP is not supported (following the behaviour of
+	  DC CVAP itself if the system does not define a point of persistence).
+
 endmenu
 
 config ARM64_MODULE_CMODEL_LARGE

arch/arm64/include/asm/assembler.h

@@ -352,6 +352,12 @@ alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
 	dc	\op, \kaddr
 alternative_else
 	dc	civac, \kaddr
+alternative_endif
+	.elseif	(\op == cvap)
+alternative_if ARM64_HAS_DCPOP
+	sys 3, c7, c12, 1, \kaddr	// dc cvap
+alternative_else
+	dc	cvac, \kaddr
 alternative_endif
 	.else
 	dc	\op, \kaddr

arch/arm64/include/asm/cacheflush.h

@@ -69,6 +69,7 @@ extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void __flush_dcache_area(void *addr, size_t len);
 extern void __inval_dcache_area(void *addr, size_t len);
 extern void __clean_dcache_area_poc(void *addr, size_t len);
+extern void __clean_dcache_area_pop(void *addr, size_t len);
 extern void __clean_dcache_area_pou(void *addr, size_t len);
 extern long __flush_cache_user_range(unsigned long start, unsigned long end);
 extern void sync_icache_aliases(void *kaddr, unsigned long len);

arch/arm64/include/asm/cpucaps.h

@@ -39,7 +39,8 @@
 #define ARM64_WORKAROUND_QCOM_FALKOR_E1003	18
 #define ARM64_WORKAROUND_858921			19
 #define ARM64_WORKAROUND_CAVIUM_30115		20
+#define ARM64_HAS_DCPOP				21
 
-#define ARM64_NCAPS				21
+#define ARM64_NCAPS				22
 
 #endif /* __ASM_CPUCAPS_H */

arch/arm64/kernel/cpufeature.c

@@ -889,6 +889,17 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.min_field_value = 0,
 		.matches = has_no_fpsimd,
 	},
+#ifdef CONFIG_ARM64_PMEM
+	{
+		.desc = "Data cache clean to Point of Persistence",
+		.capability = ARM64_HAS_DCPOP,
+		.def_scope = SCOPE_SYSTEM,
+		.matches = has_cpuid_feature,
+		.sys_reg = SYS_ID_AA64ISAR1_EL1,
+		.field_pos = ID_AA64ISAR1_DPB_SHIFT,
+		.min_field_value = 1,
+	},
+#endif
 	{},
 };
 

arch/arm64/mm/cache.S

@@ -171,6 +171,20 @@ __dma_clean_area:
 ENDPIPROC(__clean_dcache_area_poc)
 ENDPROC(__dma_clean_area)
 
+/*
+ *	__clean_dcache_area_pop(kaddr, size)
+ *
+ * 	Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
+ * 	are cleaned to the PoP.
+ *
+ *	- kaddr   - kernel address
+ *	- size    - size in question
+ */
+ENTRY(__clean_dcache_area_pop)
+	dcache_by_line_op cvap, sy, x0, x1, x2, x3
+	ret
+ENDPIPROC(__clean_dcache_area_pop)
+
 /*
  *	__dma_flush_area(start, size)
  *

arch/arm64/mm/flush.c

@@ -83,3 +83,19 @@ EXPORT_SYMBOL(flush_dcache_page);
  * Additional functions defined in assembly.
  */
 EXPORT_SYMBOL(flush_icache_range);
+
+#ifdef CONFIG_ARCH_HAS_PMEM_API
+static inline void arch_wb_cache_pmem(void *addr, size_t size)
+{
+	/* Ensure order against any prior non-cacheable writes */
+	dmb(osh);
+	__clean_dcache_area_pop(addr, size);
+}
+EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
+
+static inline void arch_invalidate_pmem(void *addr, size_t size)
+{
+	__inval_dcache_area(addr, size);
+}
+EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
+#endif