Commit d54ef057 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by Mark Brown

spi: fsl-espi: remove unused linearization code

After introducing direct transfers between hardware and transfer
buffers remove all code which is unused now.

This includes getting rid of the 64k linearization buffer.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent dcb425f3
......@@ -95,9 +95,6 @@ struct fsl_espi {
struct device *dev;
void __iomem *reg_base;
const void *tx;
void *rx;
struct list_head *m_transfers;
struct spi_transfer *tx_t;
unsigned int tx_pos;
......@@ -107,11 +104,8 @@ struct fsl_espi {
bool rx_done;
bool swab;
unsigned int rx_len;
unsigned int tx_len;
unsigned int rxskip;
u8 *local_buf;
spinlock_t lock;
u32 spibrg; /* SPIBRG input clock */
......@@ -156,61 +150,6 @@ static inline void fsl_espi_write_reg8(struct fsl_espi *espi, int offset,
iowrite8(val, espi->reg_base + offset);
}
static void fsl_espi_memcpy_swab(void *to, const void *from,
struct spi_message *m,
struct spi_transfer *t)
{
struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
unsigned int len = t->len;
if (!espi->swab) {
memcpy(to, from, len);
return;
}
while (len)
if (len >= 4) {
*(u32 *)to = swahb32p(from);
to += 4;
from += 4;
len -= 4;
} else {
*(u16 *)to = swab16p(from);
to += 2;
from += 2;
len -= 2;
}
}
static void fsl_espi_copy_to_buf(struct spi_message *m,
struct fsl_espi *espi)
{
struct spi_transfer *t;
u8 *buf = espi->local_buf;
list_for_each_entry(t, &m->transfers, transfer_list) {
if (t->tx_buf)
fsl_espi_memcpy_swab(buf, t->tx_buf, m, t);
/* In RXSKIP mode controller shifts out zeros internally */
else if (!espi->rxskip)
memset(buf, 0, t->len);
buf += t->len;
}
}
static void fsl_espi_copy_from_buf(struct spi_message *m,
struct fsl_espi *espi)
{
struct spi_transfer *t;
u8 *buf = espi->local_buf;
list_for_each_entry(t, &m->transfers, transfer_list) {
if (t->rx_buf)
fsl_espi_memcpy_swab(t->rx_buf, buf, m, t);
buf += t->len;
}
}
static int fsl_espi_check_message(struct spi_message *m)
{
struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
......@@ -421,12 +360,6 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
u32 mask, spcom;
int ret;
espi->rx_len = t->len;
espi->tx_len = t->len;
espi->tx = t->tx_buf;
espi->rx = t->rx_buf;
reinit_completion(&espi->done);
/* Set SPCOM[CS] and SPCOM[TRANLEN] field */
......@@ -436,10 +369,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
/* configure RXSKIP mode */
if (espi->rxskip) {
spcom |= SPCOM_RXSKIP(espi->rxskip);
espi->tx_len = espi->rxskip;
espi->rx_len = t->len - espi->rxskip;
rx_len = t->len - espi->rxskip;
espi->rx = t->rx_buf + espi->rxskip;
if (t->rx_nbits == SPI_NBITS_DUAL)
spcom |= SPCOM_DO;
}
......@@ -497,7 +427,6 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
if (espi->rxskip)
espi->rx_t = list_next_entry(espi->rx_t, transfer_list);
fsl_espi_copy_to_buf(m, espi);
fsl_espi_setup_transfer(spi, trans);
ret = fsl_espi_bufs(spi, trans);
......@@ -511,7 +440,6 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
static int fsl_espi_do_one_msg(struct spi_master *master,
struct spi_message *m)
{
struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
unsigned int delay_usecs = 0, rx_nbits = 0;
struct spi_transfer *t, trans = {};
int ret;
......@@ -534,8 +462,6 @@ static int fsl_espi_do_one_msg(struct spi_master *master,
trans.speed_hz = t->speed_hz;
trans.bits_per_word = t->bits_per_word;
trans.delay_usecs = delay_usecs;
trans.tx_buf = espi->local_buf;
trans.rx_buf = espi->local_buf;
trans.rx_nbits = rx_nbits;
if (trans.len)
......@@ -773,12 +699,6 @@ static int fsl_espi_probe(struct device *dev, struct resource *mem,
init_completion(&espi->done);
espi->local_buf = devm_kmalloc(dev, SPCOM_TRANLEN_MAX, GFP_KERNEL);
if (!espi->local_buf) {
ret = -ENOMEM;
goto err_probe;
}
espi->reg_base = devm_ioremap_resource(dev, mem);
if (IS_ERR(espi->reg_base)) {
ret = PTR_ERR(espi->reg_base);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment