ASoC: Intel: Skylake: Use recommended SDxFMT programming sequence

For BXT platforms, the recommended sequence to program the SDxFMT is to
first couple the stream, write the format and decouple again.
For all other platforms said sequence remains unchanged.

To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is
relocated to hda_codec.h file so it can be accessed by SKL driver.
Signed-off-by: Paweł Harłoziński <pawel.harlozinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

include/sound/hda_codec.h

@@ -31,6 +31,9 @@
 #include <sound/hda_verbs.h>
 #include <sound/hda_regmap.h>
 
+#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
+#define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
+
 /*
  * Structures
  */

sound/pci/hda/hda_intel.c

@@ -373,9 +373,6 @@ enum {
 					((pci)->device == 0x0d0c) || \
 					((pci)->device == 0x160c))
 
-#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
-#define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
-
 static char *driver_short_names[] = {
 	[AZX_DRIVER_ICH] = "HDA Intel",
 	[AZX_DRIVER_PCH] = "HDA Intel PCH",

sound/soc/intel/skylake/skl-pcm.c

@@ -141,6 +141,7 @@ static void skl_set_suspend_active(struct snd_pcm_substream *substream,
 int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params)
 {
 	struct hdac_bus *bus = dev_get_drvdata(dev);
+	struct skl *skl = bus_to_skl(bus);
 	unsigned int format_val;
 	struct hdac_stream *hstream;
 	struct hdac_ext_stream *stream;
@@ -165,7 +166,18 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params)
 	if (err < 0)
 		return err;
 
-	err = snd_hdac_stream_setup(hdac_stream(stream));
+	/*
+	 * The recommended SDxFMT programming sequence for BXT
+	 * platforms is to couple the stream before writing the format
+	 */
+	if (IS_BXT(skl->pci)) {
+		snd_hdac_ext_stream_decouple(bus, stream, false);
+		err = snd_hdac_stream_setup(hdac_stream(stream));
+		snd_hdac_ext_stream_decouple(bus, stream, true);
+	} else {
+		err = snd_hdac_stream_setup(hdac_stream(stream));
+	}
+
 	if (err < 0)
 		return err;