Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - loongson64 irq rework

 - dmi support loongson

 - replace setup_irq() by request_irq()

 - jazz cleanups

 - minor cleanups and fixes

* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
  MIPS: ralink: mt7621: Fix soc_device introduction
  MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
  MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
  MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
  MAINTAINERS: Update Loongson64 entry
  MIPS: Loongson64: Load built-in dtbs
  MIPS: Loongson64: Add generic dts
  dt-bindings: mips: Add loongson boards
  MIPS: Loongson64: Drop legacy IRQ code
  dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
  irqchip: Add driver for Loongson-3 HyperTransport PIC controller
  dt-bindings: interrupt-controller: Add Loongson LIOINTC
  irqchip: loongson-liointc: Workaround LPC IRQ Errata
  irqchip: Add driver for Loongson I/O Local Interrupt Controller
  docs: mips: remove no longer needed au1xxx_ide.rst documentation
  MIPS: Alchemy: remove no longer used au1xxx_ide.h header
  ide: remove no longer used au1xxx-ide driver
  MIPS: Add support for Desktop Management Interface (DMI)
  firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
  MIPS: ralink: mt7621: introduce 'soc_device' initialization
  ...

Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson-3 HyperTransport Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips to transmit
+  interrupts from PCH PIC connected on HyperTransport bus.
+
+properties:
+  compatible:
+    const: loongson,htpic-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Four parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htintc: interrupt-controller@1fb000080 {
+      compatible = "loongson,htintc-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson Local I/O Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips as the primary
+  package interrupt controller which can route local I/O interrupt to interrupt lines
+  of cores.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,liointc-1.0
+      - const: loongson,liointc-1.0a
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    description:
+      Interrupt source of the CPU interrupts.
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    description: List of names for the parent interrupts.
+    items:
+      - const: int0
+      - const: int1
+      - const: int2
+      - const: int3
+    minItems: 1
+    maxItems: 4
+
+  '#interrupt-cells':
+    const: 2
+
+  'loongson,parent_int_map':
+    description: |
+      This property points how the children interrupts will be mapped into CPU
+      interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
+      and each bit in the cell refers to a children interrupt fron 0 to 31.
+      If a CPU interrupt line didn't connected with liointc, then keep it's
+      cell with zero.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - items:
+          minItems: 4
+          maxItems: 4
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - 'loongson,parent_int_map'
+
+
+examples:
+  - |
+    iointc: interrupt-controller@3ff01400 {
+      compatible = "loongson,liointc-1.0";
+      reg = <0x3ff01400 0x64>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>;
+      interrupt-names = "int0", "int1";
+
+      loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+                                <0x0f000000>, /* int1 */
+                                <0x00000000>, /* int2 */
+                                <0x00000000>; /* int3 */
+
+    };
+
+...

Documentation/devicetree/bindings/mips/loongson/devices.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson based Platforms Device Tree Bindings
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+description: |
+  Devices with a Loongson CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Generic Loongson3 Quad Core + RS780E
+        items:
+          - const: loongson,loongson3-4core-rs780e
+
+      - description: Generic Loongson3 Octa Core + RS780E
+        items:
+          - const: loongson,loongson3-8core-rs780e
+...

Documentation/mips/au1xxx_ide.rst

-.. include:: <isonum.txt>
-
-======================
-MIPS AU1XXX IDE driver
-======================
-
-Released 2005-07-15
-
-About
-=====
-
-This file describes the 'drivers/ide/au1xxx-ide.c', related files and the
-services they provide.
-
-If you are short in patience and just want to know how to add your hard disc to
-the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
-section.
-
-
-License
-=======
-
-:Copyright: |copy| 2003-2005 AMD, Personal Connectivity Solutions
-
-This program is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2 of the License, or (at your option) any later
-version.
-
-THIS SOFTWARE IS PROVIDED ``AS IS`` AND ANY EXPRESS OR IMPLIED WARRANTIES,
-INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-675 Mass Ave, Cambridge, MA 02139, USA.
-
-Note:
-      for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
-      Interface and Linux Device Driver" Application Note.
-
-
-Files, Configs and Compatibility
-================================
-
-Two files are introduced:
-
-  a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
-     contains : struct _auide_hwif
-
-                - timing parameters for PIO mode 0/1/2/3/4
-                - timing parameters for MWDMA 0/1/2
-
-  b) 'drivers/ide/mips/au1xxx-ide.c'
-     contains the functionality of the AU1XXX IDE driver
-
-Following extra configs variables are introduced:
-
-  CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
-	- enable the PIO+DBDMA mode
-  CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-	- enable the MWDMA mode
-
-
-Supported IDE Modes
-===================
-
-The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
-MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
-
-To change the PIO mode use the program hdparm with option -p, e.g.
-'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
--X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
-
-
-Performance Configurations
-==========================
-
-If the used system doesn't need USB support enable the following kernel
-configs::
-
-    CONFIG_IDE=y
-    CONFIG_BLK_DEV_IDE=y
-    CONFIG_IDE_GENERIC=y
-    CONFIG_BLK_DEV_IDEPCI=y
-    CONFIG_BLK_DEV_GENERIC=y
-    CONFIG_BLK_DEV_IDEDMA_PCI=y
-    CONFIG_BLK_DEV_IDE_AU1XXX=y
-    CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-    CONFIG_BLK_DEV_IDEDMA=y
-
-Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
-the burst support on DBDMA controller.
-
-If the used system need the USB support enable the following kernel configs for
-high IDE to USB throughput.
-
-::
-
-    CONFIG_IDE_GENERIC=y
-    CONFIG_BLK_DEV_IDEPCI=y
-    CONFIG_BLK_DEV_GENERIC=y
-    CONFIG_BLK_DEV_IDEDMA_PCI=y
-    CONFIG_BLK_DEV_IDE_AU1XXX=y
-    CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-    CONFIG_BLK_DEV_IDEDMA=y
-
-Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
-disable the burst support on DBDMA controller.
-
-
-Acknowledgments
-===============
-
-These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
-IDE driver from AMD.
-
-Additional input also from:
-Matthias Lenk <matthias.lenk@amd.com>
-
-Happy hacking!
-
-Enrico Walther <enrico.walther@amd.com>

Documentation/mips/index.rst

@@ -10,8 +10,6 @@ MIPS-specific Documentation
 
    ingenic-tcu
 
-   au1xxx_ide
-
 .. only::  subproject and html
 
    Indices

MAINTAINERS

@@ -11202,6 +11202,7 @@ S:	Maintained
 F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
 F:	drivers/platform/mips/cpu_hwmon.c
+F:	drivers/irqchip/irq-loongson*
 F:	drivers/*/*loongson3*
 F:	drivers/*/*/*loongson3*
 

arch/mips/Kconfig

@@ -486,9 +486,11 @@ config MACH_LOONGSON64
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT
-	select LOONGSON_MC146818
 	select ZONE_DMA32
 	select NUMA
+	select COMMON_CLK
+	select USE_OF
+	select BUILTIN_DTB
 	help
 	  This enables the support of Loongson-2/3 family of machines.
 
@@ -973,6 +975,9 @@ config CAVIUM_OCTEON_SOC
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select HAVE_PCI
+	select HAVE_PLAT_DELAY
+	select HAVE_PLAT_FW_INIT_CMDLINE
+	select HAVE_PLAT_MEMCPY
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select GPIOLIB
@@ -1229,6 +1234,15 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN
 	bool
 	select GENERIC_ISA_DMA
 
+config HAVE_PLAT_DELAY
+	bool
+
+config HAVE_PLAT_FW_INIT_CMDLINE
+	bool
+
+config HAVE_PLAT_MEMCPY
+	bool
+
 config ISA_DMA_API
 	bool
 
@@ -2676,7 +2690,7 @@ config NUMA
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
 	  Access).  This option improves performance on systems with more
 	  than two nodes; on two node systems it is generally better to
-	  leave it disabled; on single node systems disable this option
+	  leave it disabled; on single node systems leave this option
 	  disabled.
 
 config SYS_SUPPORTS_NUMA
@@ -2758,6 +2772,17 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config DMI
+	bool "Enable DMI scanning"
+	depends on MACH_LOONGSON64
+	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
+	default y
+	help
+	  Enabled scanning of DMI to identify machine quirks. Say Y
+	  here unless you have verified that your setup is not
+	  affected by entries in the DMI blacklist. Required by PNP
+	  BIOS code.
+
 config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
@@ -3070,7 +3095,7 @@ endchoice
 choice
 	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
 	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
-					 !MIPS_MALTA && \
+					 !MACH_LOONGSON64 && !MIPS_MALTA && \
 					 !CAVIUM_OCTEON_SOC
 	default MIPS_CMDLINE_FROM_BOOTLOADER
 

arch/mips/alchemy/common/time.c

@@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.cpumask	= cpu_possible_mask,
 };
 
-static struct irqaction au1x_rtcmatch2_irqaction = {
-	.handler	= au1x_rtcmatch2_irq,
-	.flags		= IRQF_TIMER,
-	.name		= "timer",
-	.dev_id		= &au1x_rtcmatch2_clockdev,
-};
-
 static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
@@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->min_delta_ns = clockevent_delta2ns(9, cd);
 	cd->min_delta_ticks = 9;	/* ~0.28ms */
 	clockevents_register_device(cd);
-	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
+	if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+			&au1x_rtcmatch2_clockdev))
+		pr_err("Failed to register timer interrupt\n");
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 

arch/mips/ar7/irq.c

@@ -83,12 +83,6 @@ static struct irq_chip ar7_sec_irq_type = {
 	.irq_ack = ar7_ack_sec_irq,
 };
 
-static struct irqaction ar7_cascade_action = {
-	.handler = no_action,
-	.name = "AR7 cascade interrupt",
-	.flags = IRQF_NO_THREAD,
-};
-
 static void __init ar7_irq_init(int base)
 {
 	int i;
@@ -116,8 +110,14 @@ static void __init ar7_irq_init(int base)
 						 handle_level_irq);
 	}
 
-	setup_irq(2, &ar7_cascade_action);
-	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	if (request_irq(2, no_action, IRQF_NO_THREAD, "AR7 cascade interrupt",
+			NULL))
+		pr_err("Failed to request irq 2 (AR7 cascade interrupt)\n");
+	if (request_irq(ar7_irq_base, no_action, IRQF_NO_THREAD,
+			"AR7 cascade interrupt", NULL)) {
+		pr_err("Failed to request irq %d (AR7 cascade interrupt)\n",
+		       ar7_irq_base);
+	}
 	set_c0_status(IE_IRQ0);
 }
 

arch/mips/ath25/ar2315.c

@@ -64,11 +64,6 @@ static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ar2315_ahb_err_interrupt  = {
-	.handler	= ar2315_ahb_err_handler,
-	.name		= "ar2315-ahb-error",
-};
-
 static void ar2315_misc_irq_handler(struct irq_desc *desc)
 {
 	u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
@@ -159,7 +154,9 @@ void __init ar2315_arch_init_irq(void)
 		panic("Failed to add IRQ domain");
 
 	irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
-	setup_irq(irq, &ar2315_ahb_err_interrupt);
+	if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
+			NULL))
+		pr_err("Failed to register ar2315-ahb-error interrupt\n");
 
 	irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
 					 ar2315_misc_irq_handler, domain);

arch/mips/ath25/ar5312.c

@@ -68,11 +68,6 @@ static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ar5312_ahb_err_interrupt  = {
-	.handler = ar5312_ahb_err_handler,
-	.name    = "ar5312-ahb-error",
-};
-
 static void ar5312_misc_irq_handler(struct irq_desc *desc)
 {
 	u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
@@ -154,7 +149,9 @@ void __init ar5312_arch_init_irq(void)
 		panic("Failed to add IRQ domain");
 
 	irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
-	setup_irq(irq, &ar5312_ahb_err_interrupt);
+	if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
+			NULL))
+		pr_err("Failed to register ar5312-ahb-error interrupt\n");
 
 	irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
 					 ar5312_misc_irq_handler, domain);

arch/mips/ath79/setup.c

@@ -15,7 +15,7 @@
 #include <linux/memblock.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/irqchip.h>
 

arch/mips/bcm63xx/irq.c

@@ -399,26 +399,6 @@ static struct irq_chip bcm63xx_external_irq_chip = {
 	.irq_set_type	= bcm63xx_external_irq_set_type,
 };
 
-static struct irqaction cpu_ip2_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_ip2",
-	.flags		= IRQF_NO_THREAD,
-};
-
-#ifdef CONFIG_SMP
-static struct irqaction cpu_ip3_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_ip3",
-	.flags		= IRQF_NO_THREAD,
-};
-#endif
-
-static struct irqaction cpu_ext_cascade_action = {
-	.handler	= no_action,
-	.name		= "cascade_extirq",
-	.flags		= IRQF_NO_THREAD,
-};
-
 static void bcm63xx_init_irq(void)
 {
 	int irq_bits;
@@ -531,7 +511,7 @@ static void bcm63xx_init_irq(void)
 
 void __init arch_init_irq(void)
 {
-	int i;
+	int i, irq;
 
 	bcm63xx_init_irq();
 	mips_cpu_irq_init();
@@ -544,14 +524,25 @@ void __init arch_init_irq(void)
 					 handle_edge_irq);
 
 	if (!is_ext_irq_cascaded) {
-		for (i = 3; i < 3 + ext_irq_count; ++i)
-			setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+		for (i = 3; i < 3 + ext_irq_count; ++i) {
+			irq = MIPS_CPU_IRQ_BASE + i;
+			if (request_irq(irq, no_action, IRQF_NO_THREAD,
+					"cascade_extirq", NULL)) {
+				pr_err("Failed to request irq %d (cascade_extirq)\n",
+				       irq);
+			}
+		}
 	}
 
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+	irq = MIPS_CPU_IRQ_BASE + 2;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD,	"cascade_ip2", NULL))
+		pr_err("Failed to request irq %d (cascade_ip2)\n", irq);
 #ifdef CONFIG_SMP
 	if (is_ext_irq_cascaded) {
-		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+		irq = MIPS_CPU_IRQ_BASE + 3;
+		if (request_irq(irq, no_action,	IRQF_NO_THREAD, "cascade_ip3",
+				NULL))
+			pr_err("Failed to request irq %d (cascade_ip3)\n", irq);
 		bcm63xx_internal_irq_chip.irq_set_affinity =
 			bcm63xx_internal_set_affinity;
 

arch/mips/bmips/setup.c

@@ -10,11 +10,11 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/memblock.h>
-#include <linux/clk-provider.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/libfdt.h>

arch/mips/boot/dts/Makefile

@@ -4,6 +4,7 @@ subdir-y	+= cavium-octeon
 subdir-y	+= img
 subdir-y	+= ingenic
 subdir-y	+= lantiq
+subdir-y	+= loongson
 subdir-y	+= mscc
 subdir-y	+= mti
 subdir-y	+= netlogic

arch/mips/boot/dts/ingenic/ci20.dts

@@ -4,6 +4,7 @@
 #include "jz4780.dtsi"
 #include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/regulator/active-semi,8865-regulator.h>
 
@@ -27,6 +28,17 @@ memory {
 		       0x30000000 0x30000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		sw1 {
+			label = "ci20:sw1";
+			linux,code = <KEY_F13>;
+			gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -58,10 +70,17 @@ led3 {
 	eth0_power: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "eth0_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
 
+	ir: ir {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+	};
+
 	wlan0_power: fixedregulator@1 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan0_power";

arch/mips/boot/dts/loongson/Makefile

+# SPDX_License_Identifier: GPL_2.0
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson3_4core_rs780e.dtb loongson3_8core_rs780e.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))

arch/mips/boot/dts/loongson/loongson3-package.dtsi

+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			/* 3A HT Config Space */
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000
+			/* 3B HT Config Space */
+			0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+						<0x0f000000>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e0 0x8>;
+			clock-frequency = <33000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		cpu_uart1: serial@1fe001e8 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e8 0x8>;
+			clock-frequency = <33000000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+			no-loopback-test;
+		};
+	};
+};

arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts

+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson3-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson3-4core-rs780e";
+};
+
+&package0 {
+	htpic: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htpic-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+				<25 IRQ_TYPE_LEVEL_HIGH>,
+				<26 IRQ_TYPE_LEVEL_HIGH>,
+				<27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts

+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson3-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson3-8core-rs780e";
+};
+
+&package0 {
+	htpic: interrupt-controller@1efdfb000080 {
+		compatible = "loongson,htpic-1.0";
+		reg = <0x1efd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+				<25 IRQ_TYPE_LEVEL_HIGH>,
+				<26 IRQ_TYPE_LEVEL_HIGH>,
+				<27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

arch/mips/boot/dts/loongson/rs780e-pch.dtsi

+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000
+				0 0x40000000 0 0x40000000 0 0x40000000
+				0xfd 0xfe000000 0xfd 0xfe000000  0 0x2000000 /* PCI Config Space */>;
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0 0x1000>;
+
+			rtc0: rtc@70 {
+				compatible = "motorola,mc146818";
+				reg = <1 0x70 0x8>;
+				interrupts = <8>;
+				interrupt-parent = <&htpic>;
+			};
+		};
+	};
+};

arch/mips/cavium-octeon/octeon-irq.c

@@ -2199,6 +2199,9 @@ static int octeon_irq_cib_map(struct irq_domain *d,
 	}
 
 	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
+	if (!cd)
+		return -ENOMEM;
+
 	cd->host_data = host_data;
 	cd->bit = hw;
 

arch/mips/cobalt/irq.c

@@ -45,18 +45,20 @@ asmlinkage void plat_irq_dispatch(void)
 		spurious_interrupt();
 }
 
-static struct irqaction cascade = {
-	.handler	= no_action,
-	.name		= "cascade",
-	.flags		= IRQF_NO_THREAD,
-};
-
 void __init arch_init_irq(void)
 {
 	mips_cpu_irq_init();
 	gt641xx_irq_init();
 	init_i8259_irqs();
 
-	setup_irq(GT641XX_CASCADE_IRQ, &cascade);
-	setup_irq(I8259_CASCADE_IRQ, &cascade);
+	if (request_irq(GT641XX_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+			"cascade", NULL)) {
+		pr_err("Failed to request irq %d (cascade)\n",
+		       GT641XX_CASCADE_IRQ);
+	}
+	if (request_irq(I8259_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+			"cascade", NULL)) {
+		pr_err("Failed to request irq %d (cascade)\n",
+		       I8259_CASCADE_IRQ);
+	}
 }

arch/mips/configs/ar7_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/mips/configs/ath25_defconfig

@@ -22,7 +22,6 @@ CONFIG_HZ_100=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/mips/configs/ath79_defconfig

@@ -23,7 +23,6 @@ CONFIG_PCI=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/mips/configs/bcm63xx_defconfig

@@ -21,8 +21,6 @@ CONFIG_PCI=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_BCM63XX=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y

arch/mips/configs/bmips_be_defconfig

@@ -12,8 +12,6 @@ CONFIG_NR_CPUS=4
 # CONFIG_SECCOMP is not set
 CONFIG_MIPS_O32_FP64_SUPPORT=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=y

arch/mips/configs/bmips_stb_defconfig

@@ -21,8 +21,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_BMIPS_CPUFREQ=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=y

arch/mips/configs/ci20_defconfig

 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_MODULES=y
 CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -88,12 +89,14 @@ CONFIG_I2C_JZ4780=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_JZ4740_WDT=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
@@ -166,3 +169,21 @@ CONFIG_STACKTRACE=y
 # CONFIG_FTRACE is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LIRC=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m

arch/mips/configs/db1xxx_defconfig

@@ -28,7 +28,6 @@ CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_BLK_DEV_BSGLIB=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEFAULT_NOOP=y
 CONFIG_CMA=y
 CONFIG_CMA_DEBUG=y
 CONFIG_NET=y

arch/mips/configs/generic/board-ni169445.config

@@ -19,7 +19,6 @@ CONFIG_MTD_NAND_ECC_SW_HAMMING=y
 CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPIO=y
-CONFIG_MTD_NAND_IDS=y
 
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BLOCK=y

arch/mips/configs/jazz_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_RELAY=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MACH_JAZZ=y
 CONFIG_OLIVETTI_M700=y
+CONFIG_MIPS_MAGNUM_4000=y
+CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -18,168 +20,17 @@ CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=m
 CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE=m
-CONFIG_DECNET=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_HAMRADIO=y
-CONFIG_AX25=m
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 CONFIG_PARPORT_1284=y
+CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
@@ -194,26 +45,12 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_SCSI_PPA=m
 CONFIG_SCSI_IMM=m
 CONFIG_JAZZ_ESP=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
@@ -221,28 +58,18 @@ CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_MIPS_JAZZ_SONIC=y
 CONFIG_NE2000=m
-CONFIG_PHYLIB=m
-CONFIG_CICADA_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_PLIP=m
-CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_SERIO_PARKBD=m
 CONFIG_SERIO_RAW=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_PRINTER=m
-CONFIG_PPDEV=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_W1=m
+CONFIG_FB=y
+CONFIG_FB_G364=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=y
@@ -263,78 +90,8 @@ CONFIG_VFAT_FS=m
 CONFIG_NTFS_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=m

arch/mips/configs/lasat_defconfig

@@ -16,8 +16,6 @@ CONFIG_HZ_1000=y
 # CONFIG_SECCOMP is not set
 CONFIG_PCI=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/mips/configs/lemote2f_defconfig

@@ -26,7 +26,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/mips/configs/loongson3_defconfig

@@ -38,8 +38,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_MQ_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_KSM=y
 CONFIG_NET=y

arch/mips/configs/msp71xx_defconfig

@@ -14,8 +14,6 @@ CONFIG_PCI=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=y

arch/mips/configs/pnx8335_stb225_defconfig

@@ -14,8 +14,6 @@ CONFIG_HZ_128=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/mips/configs/rb532_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/mips/configs/rt305x_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_COREDUMP is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/mips/configs/xway_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_COREDUMP is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/mips/dec/setup.c

@@ -103,28 +103,8 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
 int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
 int *fpu_kstat_irq;
 
-static struct irqaction ioirq = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-static struct irqaction fpuirq = {
-	.handler = no_action,
-	.name = "fpu",
-	.flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction busirq = {
-	.name = "bus error",
-	.flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction haltirq = {
-	.handler = dec_intr_halt,
-	.name = "halt",
-	.flags = IRQF_NO_THREAD,
-};
-
+static irq_handler_t busirq_handler;
+static unsigned int busirq_flags = IRQF_NO_THREAD;
 
 /*
  * Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
@@ -134,21 +114,21 @@ static void __init dec_be_init(void)
 	switch (mips_machtype) {
 	case MACH_DS23100:	/* DS2100/DS3100 Pmin/Pmax */
 		board_be_handler = dec_kn01_be_handler;
-		busirq.handler = dec_kn01_be_interrupt;
-		busirq.flags |= IRQF_SHARED;
+		busirq_handler = dec_kn01_be_interrupt;
+		busirq_flags |= IRQF_SHARED;
 		dec_kn01_be_init();
 		break;
 	case MACH_DS5000_1XX:	/* DS5000/1xx 3min */
 	case MACH_DS5000_XX:	/* DS5000/xx Maxine */
 		board_be_handler = dec_kn02xa_be_handler;
-		busirq.handler = dec_kn02xa_be_interrupt;
+		busirq_handler = dec_kn02xa_be_interrupt;
 		dec_kn02xa_be_init();
 		break;
 	case MACH_DS5000_200:	/* DS5000/200 3max */
 	case MACH_DS5000_2X0:	/* DS5000/240 3max+ */
 	case MACH_DS5900:	/* DS5900 bigmax */
 		board_be_handler = dec_ecc_be_handler;
-		busirq.handler = dec_ecc_be_interrupt;
+		busirq_handler = dec_ecc_be_interrupt;
 		dec_ecc_be_init();
 		break;
 	}
@@ -764,20 +744,29 @@ void __init arch_init_irq(void)
 		int irq_fpu;
 
 		irq_fpu = dec_interrupt[DEC_IRQ_FPU];
-		setup_irq(irq_fpu, &fpuirq);
+		if (request_irq(irq_fpu, no_action, IRQF_NO_THREAD, "fpu",
+				NULL))
+			pr_err("Failed to register fpu interrupt\n");
 		desc_fpu = irq_to_desc(irq_fpu);
 		fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
 	}
-	if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
-		setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
-
+	if (dec_interrupt[DEC_IRQ_CASCADE] >= 0) {
+		if (request_irq(dec_interrupt[DEC_IRQ_CASCADE], no_action,
+				IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("Failed to register cascade interrupt\n");
+	}
 	/* Register the bus error interrupt. */
-	if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
-		setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
-
+	if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
+		if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
+				busirq_flags, "bus error", busirq_handler))
+			pr_err("Failed to register bus error interrupt\n");
+	}
 	/* Register the HALT interrupt. */
-	if (dec_interrupt[DEC_IRQ_HALT] >= 0)
-		setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
+	if (dec_interrupt[DEC_IRQ_HALT] >= 0) {
+		if (request_irq(dec_interrupt[DEC_IRQ_HALT], dec_intr_halt,
+				IRQF_NO_THREAD, "halt", NULL))
+			pr_err("Failed to register halt interrupt\n");
+	}
 }
 
 asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)

arch/mips/emma/markeins/irq.c

@@ -153,14 +153,6 @@ void emma2rh_gpio_irq_init(void)
 					      handle_edge_irq, "edge");
 }
 
-static struct irqaction irq_cascade = {
-	   .handler = no_action,
-	   .flags = IRQF_NO_THREAD,
-	   .name = "cascade",
-	   .dev_id = NULL,
-	   .next = NULL,
-};
-
 /*
  * the first level int-handler will jump here if it is a emma2rh irq
  */
@@ -236,6 +228,7 @@ void emma2rh_irq_dispatch(void)
 void __init arch_init_irq(void)
 {
 	u32 reg;
+	int irq;
 
 	/* by default, interrupts are disabled. */
 	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
@@ -272,9 +265,15 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 
 	/* setup cascade interrupts */
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
+	irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
+	irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
+	irq = MIPS_CPU_IRQ_BASE + 2;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
 }
 
 asmlinkage void plat_irq_dispatch(void)

arch/mips/fw/lib/cmdline.c

@@ -16,6 +16,7 @@ int fw_argc;
 int *_fw_argv;
 int *_fw_envp;
 
+#ifndef CONFIG_HAVE_PLAT_FW_INIT_CMDLINE
 void __init fw_init_cmdline(void)
 {
 	int i;
@@ -41,6 +42,7 @@ void __init fw_init_cmdline(void)
 			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 }
+#endif
 
 char * __init fw_getcmdline(void)
 {

arch/mips/generic/init.c

@@ -5,10 +5,10 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 
 #include <asm/bootinfo.h>

arch/mips/include/asm/dmi.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H
+
+#include <linux/io.h>
+#include <linux/memblock.h>
+
+#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_unmap(x, l)		iounmap(x)
+#define dmi_remap(x, l)			ioremap_cache(x, l)
+#define dmi_unmap(x)			iounmap(x)
+
+/* MIPS initialize DMI scan before SLAB is ready, so we use memblock here */
+#define dmi_alloc(l)			memblock_alloc_low(l, PAGE_SIZE)
+
+#if defined(CONFIG_MACH_LOONGSON64)
+#define SMBIOS_ENTRY_POINT_SCAN_START	0xFFFE000
+#endif
+
+#endif /* _ASM_DMI_H */

arch/mips/include/asm/elf.h

@@ -445,6 +445,9 @@ extern unsigned int elf_hwcap;
 #define ELF_PLATFORM  __elf_platform
 extern const char *__elf_platform;
 
+#define ELF_BASE_PLATFORM  __elf_base_platform
+extern const char *__elf_base_platform;
+
 /*
  * See comments in asm-alpha/elf.h, this is the same thing
  * on the MIPS.

arch/mips/include/asm/i8259.h

@@ -36,6 +36,7 @@ extern raw_spinlock_t i8259A_lock;
 extern void make_8259A_irq(unsigned int irq);
 
 extern void init_i8259_irqs(void);
+extern struct irq_domain *__init_i8259_irqs(struct device_node *node);
 
 /**
  * i8159_set_poll() - Override the i8259 polling function

arch/mips/include/asm/mach-ar7/irq.h

@@ -11,6 +11,6 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_AR7_IRQ_H */

arch/mips/include/asm/mach-ath79/irq.h

@@ -27,6 +27,6 @@
 #define ATH79_IP3_IRQ_COUNT     3
 #define ATH79_IP3_IRQ(_x)       (ATH79_IP3_IRQ_BASE + (_x))
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_ATH79_IRQ_H */

arch/mips/include/asm/mach-au1x00/au1xxx_ide.h

-/*
- * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00  Aug. 02 2005
- *
- * BRIEF MODULE DESCRIPTION
- * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
- *
- * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any later
- * version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
- * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
- *	 Interface and Linux Device Driver" Application Note.
- */
-
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-#define DMA_WAIT_TIMEOUT	100
-#define NUM_DESCRIPTORS		PRD_ENTRIES
-#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
-#define NUM_DESCRIPTORS		2
-#endif
-
-#ifndef AU1XXX_ATA_RQSIZE
-#define AU1XXX_ATA_RQSIZE	128
-#endif
-
-/* Disable Burstable-Support for DBDMA */
-#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
-#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
-#endif
-
-typedef struct {
-	u32			tx_dev_id, rx_dev_id, target_dev_id;
-	u32			tx_chan, rx_chan;
-	void			*tx_desc_head, *rx_desc_head;
-	ide_hwif_t		*hwif;
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-	ide_drive_t		*drive;
-	struct dbdma_cmd	*dma_table_cpu;
-	dma_addr_t		dma_table_dma;
-#endif
-	int			irq;
-	u32			regbase;
-	int			ddma_id;
-} _auide_hwif;
-
-/******************************************************************************/
-/* PIO Mode timing calculation :					      */
-/*									      */
-/* Static Bus Spec   ATA Spec						      */
-/*	Tcsoe	   =	t1						      */
-/*	Toecs	   =	t9						      */
-/*	Twcs	   =	t9						      */
-/*	Tcsh	   =	t2i | t2					      */
-/*	Tcsoff	   =	t2i | t2					      */
-/*	Twp	   =	t2						      */
-/*	Tcsw	   =	t1						      */
-/*	Tpm	   =	0						      */
-/*	Ta	   =	t1+t2						      */
-/******************************************************************************/
-
-#define TCSOE_MASK		(0x07 << 29)
-#define TOECS_MASK		(0x07 << 26)
-#define TWCS_MASK		(0x07 << 28)
-#define TCSH_MASK		(0x0F << 24)
-#define TCSOFF_MASK		(0x07 << 20)
-#define TWP_MASK		(0x3F << 14)
-#define TCSW_MASK		(0x0F << 10)
-#define TPM_MASK		(0x0F << 6)
-#define TA_MASK			(0x3F << 0)
-#define TS_MASK			(1 << 8)
-
-/* Timing parameters PIO mode 0 */
-#define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
-#define SBC_IDE_PIO0_TOECS	(0x01 << 26)
-#define SBC_IDE_PIO0_TWCS	(0x02 << 28)
-#define SBC_IDE_PIO0_TCSH	(0x08 << 24)
-#define SBC_IDE_PIO0_TCSOFF	(0x07 << 20)
-#define SBC_IDE_PIO0_TWP	(0x10 << 14)
-#define SBC_IDE_PIO0_TCSW	(0x04 << 10)
-#define SBC_IDE_PIO0_TPM	(0x00 << 6)
-#define SBC_IDE_PIO0_TA		(0x15 << 0)
-/* Timing parameters PIO mode 1 */
-#define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
-#define SBC_IDE_PIO1_TOECS	(0x01 << 26)
-#define SBC_IDE_PIO1_TWCS	(0x01 << 28)
-#define SBC_IDE_PIO1_TCSH	(0x06 << 24)
-#define SBC_IDE_PIO1_TCSOFF	(0x06 << 20)
-#define SBC_IDE_PIO1_TWP	(0x08 << 14)
-#define SBC_IDE_PIO1_TCSW	(0x03 << 10)
-#define SBC_IDE_PIO1_TPM	(0x00 << 6)
-#define SBC_IDE_PIO1_TA		(0x0B << 0)
-/* Timing parameters PIO mode 2 */
-#define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
-#define SBC_IDE_PIO2_TOECS	(0x01 << 26)
-#define SBC_IDE_PIO2_TWCS	(0x01 << 28)
-#define SBC_IDE_PIO2_TCSH	(0x07 << 24)
-#define SBC_IDE_PIO2_TCSOFF	(0x07 << 20)
-#define SBC_IDE_PIO2_TWP	(0x1F << 14)
-#define SBC_IDE_PIO2_TCSW	(0x05 << 10)
-#define SBC_IDE_PIO2_TPM	(0x00 << 6)
-#define SBC_IDE_PIO2_TA		(0x22 << 0)
-/* Timing parameters PIO mode 3 */
-#define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
-#define SBC_IDE_PIO3_TOECS	(0x01 << 26)
-#define SBC_IDE_PIO3_TWCS	(0x01 << 28)
-#define SBC_IDE_PIO3_TCSH	(0x0D << 24)
-#define SBC_IDE_PIO3_TCSOFF	(0x0D << 20)
-#define SBC_IDE_PIO3_TWP	(0x15 << 14)
-#define SBC_IDE_PIO3_TCSW	(0x05 << 10)
-#define SBC_IDE_PIO3_TPM	(0x00 << 6)
-#define SBC_IDE_PIO3_TA		(0x1A << 0)
-/* Timing parameters PIO mode 4 */
-#define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
-#define SBC_IDE_PIO4_TOECS	(0x01 << 26)
-#define SBC_IDE_PIO4_TWCS	(0x01 << 28)
-#define SBC_IDE_PIO4_TCSH	(0x04 << 24)
-#define SBC_IDE_PIO4_TCSOFF	(0x04 << 20)
-#define SBC_IDE_PIO4_TWP	(0x0D << 14)
-#define SBC_IDE_PIO4_TCSW	(0x03 << 10)
-#define SBC_IDE_PIO4_TPM	(0x00 << 6)
-#define SBC_IDE_PIO4_TA		(0x12 << 0)
-/* Timing parameters MDMA mode 0 */
-#define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
-#define SBC_IDE_MDMA0_TOECS	(0x01 << 26)
-#define SBC_IDE_MDMA0_TWCS	(0x01 << 28)
-#define SBC_IDE_MDMA0_TCSH	(0x07 << 24)
-#define SBC_IDE_MDMA0_TCSOFF	(0x07 << 20)
-#define SBC_IDE_MDMA0_TWP	(0x0C << 14)
-#define SBC_IDE_MDMA0_TCSW	(0x03 << 10)
-#define SBC_IDE_MDMA0_TPM	(0x00 << 6)
-#define SBC_IDE_MDMA0_TA	(0x0F << 0)
-/* Timing parameters MDMA mode 1 */
-#define SBC_IDE_MDMA1_TCSOE	(0x05 << 29)
-#define SBC_IDE_MDMA1_TOECS	(0x01 << 26)
-#define SBC_IDE_MDMA1_TWCS	(0x01 << 28)
-#define SBC_IDE_MDMA1_TCSH	(0x05 << 24)
-#define SBC_IDE_MDMA1_TCSOFF	(0x05 << 20)
-#define SBC_IDE_MDMA1_TWP	(0x0F << 14)
-#define SBC_IDE_MDMA1_TCSW	(0x05 << 10)
-#define SBC_IDE_MDMA1_TPM	(0x00 << 6)
-#define SBC_IDE_MDMA1_TA	(0x15 << 0)
-/* Timing parameters MDMA mode 2 */
-#define SBC_IDE_MDMA2_TCSOE	(0x04 << 29)
-#define SBC_IDE_MDMA2_TOECS	(0x01 << 26)
-#define SBC_IDE_MDMA2_TWCS	(0x01 << 28)
-#define SBC_IDE_MDMA2_TCSH	(0x04 << 24)
-#define SBC_IDE_MDMA2_TCSOFF	(0x04 << 20)
-#define SBC_IDE_MDMA2_TWP	(0x0D << 14)
-#define SBC_IDE_MDMA2_TCSW	(0x04 << 10)
-#define SBC_IDE_MDMA2_TPM	(0x00 << 6)
-#define SBC_IDE_MDMA2_TA	(0x12 << 0)
-
-#define SBC_IDE_TIMING(mode) \
-	(SBC_IDE_##mode##_TWCS | \
-	 SBC_IDE_##mode##_TCSH | \
-	 SBC_IDE_##mode##_TCSOFF | \
-	 SBC_IDE_##mode##_TWP | \
-	 SBC_IDE_##mode##_TCSW | \
-	 SBC_IDE_##mode##_TPM | \
-	 SBC_IDE_##mode##_TA)

arch/mips/include/asm/mach-emma2rh/irq.h

@@ -10,6 +10,6 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_EMMA2RH_IRQ_H */

arch/mips/include/asm/mach-ip27/irq.h

@@ -12,7 +12,7 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #define IP27_HUB_PEND0_IRQ	(MIPS_CPU_IRQ_BASE + 2)
 #define IP27_HUB_PEND1_IRQ	(MIPS_CPU_IRQ_BASE + 3)

arch/mips/include/asm/mach-ip30/irq.h

@@ -76,7 +76,7 @@ extern void __init ip30_install_ipi(void);
  */
 #define IP30_POWER_IRQ		HEART_L2_INT_POWER_BTN
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #define IP30_HEART_L0_IRQ	(MIPS_CPU_IRQ_BASE + 2)
 #define IP30_HEART_L1_IRQ	(MIPS_CPU_IRQ_BASE + 3)

arch/mips/include/asm/mach-lantiq/falcon/irq.h

@@ -11,6 +11,6 @@
 
 #define NR_IRQS 328
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif

arch/mips/include/asm/mach-lantiq/xway/irq.h

@@ -11,6 +11,6 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif

arch/mips/include/asm/mach-lasat/irq.h

@@ -9,6 +9,6 @@
 
 #define NR_IRQS			24
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* _ASM_MACH_LASAT_IRQ_H */

arch/mips/include/asm/mach-loongson64/boot_param.h

@@ -2,6 +2,8 @@
 #ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
 #define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
 
+#include <linux/types.h>
+
 #define SYSTEM_RAM_LOW		1
 #define SYSTEM_RAM_HIGH		2
 #define SYSTEM_RAM_RESERVED	3

arch/mips/include/asm/mach-loongson64/builtin_dtbs.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ *
+ * Built-in Generic dtbs for MACH_LOONGSON64
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
+#define __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
+
+extern u32 __dtb_loongson3_4core_rs780e_begin[];
+extern u32 __dtb_loongson3_8core_rs780e_begin[];
+#endif

arch/mips/include/asm/mach-loongson64/irq.h

@@ -7,34 +7,6 @@
 /* cpu core interrupt numbers */
 #define MIPS_CPU_IRQ_BASE 56
 
-#define LOONGSON_UART_IRQ   (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
-#define LOONGSON_TIMER_IRQ  (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
+#include <asm/mach-generic/irq.h>
 
-#define LOONGSON_HT1_CFG_BASE		loongson_sysconf.ht_control_base
-#define LOONGSON_HT1_INT_VECTOR_BASE	(LOONGSON_HT1_CFG_BASE + 0x80)
-#define LOONGSON_HT1_INT_EN_BASE	(LOONGSON_HT1_CFG_BASE + 0xa0)
-#define LOONGSON_HT1_INT_VECTOR(n)	\
-		LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
-#define LOONGSON_HT1_INTN_EN(n)		\
-		LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
-
-#define LOONGSON_INT_ROUTER_OFFSET	0x1400
-#define LOONGSON_INT_ROUTER_INTEN	\
-	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
-#define LOONGSON_INT_ROUTER_INTENSET	\
-	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
-#define LOONGSON_INT_ROUTER_INTENCLR	\
-	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
-#define LOONGSON_INT_ROUTER_ENTRY(n)	\
-	  LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
-#define LOONGSON_INT_ROUTER_LPC		LOONGSON_INT_ROUTER_ENTRY(0x0a)
-#define LOONGSON_INT_ROUTER_HT1(n)	LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
-
-#define LOONGSON_INT_COREx_INTy(x, y)	(1<<(x) | 1<<(y+4))	/* route to int y of core x */
-
-extern void fixup_irqs(void);
-extern void loongson3_ipi_interrupt(struct pt_regs *regs);
-
-#include_next <irq.h>
 #endif /* __ASM_MACH_LOONGSON64_IRQ_H_ */

arch/mips/include/asm/mach-loongson64/loongson.h

@@ -25,6 +25,7 @@ extern const struct plat_smp_ops loongson3_smp_ops;
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);
 extern void __init prom_init_env(void);
+extern void *loongson_fdt_blob;
 
 /* irq operation functions */
 extern void mach_irq_dispatch(unsigned int pending);

arch/mips/include/asm/mach-malta/irq.h

@@ -5,6 +5,6 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_MIPS_IRQ_H */

arch/mips/include/asm/mach-pic32/irq.h

@@ -9,6 +9,6 @@
 #define NR_IRQS	256
 #define MIPS_CPU_IRQ_BASE 0
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_PIC32_IRQ_H */

arch/mips/include/asm/mach-pistachio/irq.h

@@ -10,6 +10,6 @@
 
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_PISTACHIO_IRQ_H */

arch/mips/include/asm/mach-ralink/irq.h

@@ -5,6 +5,6 @@
 #define GIC_NUM_INTRS	64
 #define NR_IRQS 256
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif

arch/mips/include/asm/mach-rm/mc146818rtc.h

@@ -16,6 +16,6 @@
 #define mc146818_decode_year(year) ((year) + 1980)
 #endif
 
-#include_next <mc146818rtc.h>
+#include <asm/mach-generic/mc146818rtc.h>
 
 #endif /* __ASM_MACH_RM_MC146818RTC_H */

arch/mips/include/asm/mach-vr41xx/irq.h

@@ -4,6 +4,6 @@
 
 #include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __ASM_MACH_VR41XX_IRQ_H */

arch/mips/include/asm/mach-xilfpga/irq.h

@@ -9,6 +9,6 @@
 
 #define NR_IRQS 32
 
-#include_next <irq.h>
+#include <asm/mach-generic/irq.h>
 
 #endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */

arch/mips/include/asm/processor.h

@@ -254,13 +254,13 @@ struct thread_struct {
 #ifdef CONFIG_MIPS_FP_SUPPORT
 	/* Saved fpu/fpu emulator stuff. */
 	struct mips_fpu_struct fpu FPU_ALIGN;
-#endif
 	/* Assigned branch delay slot 'emulation' frame */
 	atomic_t bd_emu_frame;
 	/* PC of the branch from a branch delay slot 'emulation' */
 	unsigned long bd_emu_branch_pc;
 	/* PC to continue from following a branch delay slot 'emulation' */
 	unsigned long bd_emu_cont_pc;
+#endif
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/* Emulated instruction count */
 	unsigned long emulated_fp;
@@ -303,7 +303,11 @@ struct thread_struct {
 		.fpr		= {{{0,},},},			\
 		.fcr31		= 0,				\
 		.msacsr		= 0,				\
-	},
+	},							\
+	/* Delay slot emulation */				\
+	.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE),		\
+	.bd_emu_branch_pc = 0,					\
+	.bd_emu_cont_pc = 0,
 #else
 # define FPU_INIT
 #endif
@@ -335,10 +339,6 @@ struct thread_struct {
 	 * FPU affinity state (null if not FPAFF)		\
 	 */							\
 	FPAFF_INIT						\
-	/* Delay slot emulation */				\
-	.bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE),		\
-	.bd_emu_branch_pc = 0,					\
-	.bd_emu_cont_pc = 0,					\
 	/*							\
 	 * Saved DSP stuff					\
 	 */							\

arch/mips/include/asm/sni.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_SNI_H
 #define __ASM_SNI_H
 
+#include <linux/irqreturn.h>
+
 extern unsigned int sni_brd_type;
 
 #define SNI_BRD_10		   2
@@ -239,6 +241,6 @@ static inline int sni_eisa_root_init(void)
 
 /* common irq stuff */
 extern void (*sni_hwint)(void);
-extern struct irqaction sni_isa_irq;
+extern irqreturn_t sni_isa_irq_handler(int dummy, void *p);
 
 #endif /* __ASM_SNI_H */

arch/mips/jazz/irq.c

@@ -125,24 +125,18 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction r4030_timer_irqaction = {
-	.handler	= r4030_timer_interrupt,
-	.flags		= IRQF_TIMER,
-	.name		= "R4030 timer",
-};
-
 void __init plat_time_init(void)
 {
 	struct clock_event_device *cd = &r4030_clockevent;
-	struct irqaction *action = &r4030_timer_irqaction;
 	unsigned int cpu = smp_processor_id();
 
 	BUG_ON(HZ != 100);
 
 	cd->cpumask		= cpumask_of(cpu);
 	clockevents_register_device(cd);
-	action->dev_id = cd;
-	setup_irq(JAZZ_TIMER_IRQ, action);
+	if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
+			"R4030 timer", cd))
+		pr_err("Failed to register R4030 timer interrupt\n");
 
 	/*
 	 * Set clock to 100Hz.

arch/mips/jz4740/time.c

@@ -4,8 +4,8 @@
  *  JZ4740 platform time support
  */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
+#include <linux/of_clk.h>
 
 #include <asm/mach-jz4740/timer.h>
 

arch/mips/kernel/cevt-bcm1480.c

@@ -91,16 +91,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 }
 
 static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
 static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
 
 void sb1480_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
-	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
 	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+	unsigned long flags =  IRQF_PERCPU | IRQF_TIMER;
 
 	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
 
@@ -133,11 +132,7 @@ void sb1480_clockevent_init(void)
 
 	bcm1480_unmask_irq(cpu, irq);
 
-	action->handler = sibyte_counter_handler;
-	action->flags	= IRQF_PERCPU | IRQF_TIMER;
-	action->name	= name;
-	action->dev_id	= cd;
-
 	irq_set_affinity(irq, cpumask_of(cpu));
-	setup_irq(irq, action);
+	if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
+		pr_err("Failed to request irq %d (%s)\n", irq, name);
 }

arch/mips/kernel/cevt-ds1287.c

@@ -100,14 +100,9 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ds1287_irqaction = {
-	.handler	= ds1287_interrupt,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-	.name		= "ds1287",
-};
-
 int __init ds1287_clockevent_init(int irq)
 {
+	unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
 	struct clock_event_device *cd;
 
 	cd = &ds1287_clockevent;
@@ -122,5 +117,5 @@ int __init ds1287_clockevent_init(int irq)
 
 	clockevents_register_device(&ds1287_clockevent);
 
-	return setup_irq(irq, &ds1287_irqaction);
+	return request_irq(irq, ds1287_interrupt, flags, "ds1287", NULL);
 }

arch/mips/kernel/cevt-gt641xx.c

@@ -120,12 +120,6 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction gt641xx_timer0_irqaction = {
-	.handler	= gt641xx_timer0_interrupt,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-	.name		= "gt641xx_timer0",
-};
-
 static int __init gt641xx_timer0_clockevent_init(void)
 {
 	struct clock_event_device *cd;
@@ -146,6 +140,7 @@ static int __init gt641xx_timer0_clockevent_init(void)
 
 	clockevents_register_device(&gt641xx_timer0_clockevent);
 
-	return setup_irq(GT641XX_TIMER0_IRQ, &gt641xx_timer0_irqaction);
+	return request_irq(GT641XX_TIMER0_IRQ, gt641xx_timer0_interrupt,
+			   IRQF_PERCPU | IRQF_TIMER, "gt641xx_timer0", NULL);
 }
 arch_initcall(gt641xx_timer0_clockevent_init);

arch/mips/kernel/cevt-r4k.c

@@ -252,6 +252,7 @@ unsigned int __weak get_c0_compare_int(void)
 
 int r4k_clockevent_init(void)
 {
+	unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *cd;
 	unsigned int irq, min_delta;
@@ -291,7 +292,9 @@ int r4k_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-	setup_irq(irq, &c0_compare_irqaction);
+	if (request_irq(irq, c0_compare_interrupt, flags, "timer",
+			c0_compare_interrupt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 
 	return 0;
 }

arch/mips/kernel/cevt-sb1250.c

@@ -90,16 +90,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 }
 
 static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
 static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
 
 void sb1250_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int irq = K_INT_TIMER_0 + cpu;
-	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
 	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+	unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
 
 	/* Only have 4 general purpose timers, and we use last one as hpt */
 	BUG_ON(cpu > 2);
@@ -133,11 +132,7 @@ void sb1250_clockevent_init(void)
 
 	sb1250_unmask_irq(cpu, irq);
 
-	action->handler = sibyte_counter_handler;
-	action->flags	= IRQF_PERCPU | IRQF_TIMER;
-	action->name	= name;
-	action->dev_id	= cd;
-
 	irq_set_affinity(irq, cpumask_of(cpu));
-	setup_irq(irq, action);
+	if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
+		pr_err("Failed to request irq %d (%s)\n", irq, name);
 }

arch/mips/kernel/cevt-txx9.c

@@ -174,13 +174,6 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction txx9tmr_irq = {
-	.handler	= txx9tmr_interrupt,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-	.name		= "txx9tmr",
-	.dev_id		= &txx9_clock_event_device,
-};
-
 void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
 				 unsigned int imbusclk)
 {
@@ -202,7 +195,9 @@ void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
 	cd->irq = irq;
 	cd->cpumask = cpumask_of(0),
 	clockevents_register_device(cd);
-	setup_irq(irq, &txx9tmr_irq);
+	if (request_irq(irq, txx9tmr_interrupt, IRQF_PERCPU | IRQF_TIMER,
+			"txx9tmr", &txx9_clock_event_device))
+		pr_err("Failed to request irq %d (txx9tmr)\n", irq);
 	printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
 	       baseaddr, irq);
 }

arch/mips/kernel/cpu-probe.c

@@ -513,6 +513,13 @@ static inline void set_elf_platform(int cpu, const char *plat)
 		__elf_platform = plat;
 }
 
+static inline void set_elf_base_platform(const char *plat)
+{
+	if (__elf_base_platform == NULL) {
+		__elf_base_platform = plat;
+	}
+}
+
 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
 {
 #ifdef __NEED_VMBITS_PROBE
@@ -527,36 +534,46 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
 	switch (isa) {
 	case MIPS_CPU_ISA_M64R2:
 		c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
+		set_elf_base_platform("mips64r2");
 		/* fall through */
 	case MIPS_CPU_ISA_M64R1:
 		c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
+		set_elf_base_platform("mips64");
 		/* fall through */
 	case MIPS_CPU_ISA_V:
 		c->isa_level |= MIPS_CPU_ISA_V;
+		set_elf_base_platform("mips5");
 		/* fall through */
 	case MIPS_CPU_ISA_IV:
 		c->isa_level |= MIPS_CPU_ISA_IV;
+		set_elf_base_platform("mips4");
 		/* fall through */
 	case MIPS_CPU_ISA_III:
 		c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
+		set_elf_base_platform("mips3");
 		break;
 
 	/* R6 incompatible with everything else */
 	case MIPS_CPU_ISA_M64R6:
 		c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
+		set_elf_base_platform("mips64r6");
 		/* fall through */
 	case MIPS_CPU_ISA_M32R6:
 		c->isa_level |= MIPS_CPU_ISA_M32R6;
+		set_elf_base_platform("mips32r6");
 		/* Break here so we don't add incompatible ISAs */
 		break;
 	case MIPS_CPU_ISA_M32R2:
 		c->isa_level |= MIPS_CPU_ISA_M32R2;
+		set_elf_base_platform("mips32r2");
 		/* fall through */
 	case MIPS_CPU_ISA_M32R1:
 		c->isa_level |= MIPS_CPU_ISA_M32R1;
+		set_elf_base_platform("mips32");
 		/* fall through */
 	case MIPS_CPU_ISA_II:
 		c->isa_level |= MIPS_CPU_ISA_II;
+		set_elf_base_platform("mips2");
 		break;
 	}
 }
@@ -2113,6 +2130,7 @@ EXPORT_SYMBOL(__ua_limit);
 
 const char *__cpu_name[NR_CPUS];
 const char *__elf_platform;
+const char *__elf_base_platform;
 
 void cpu_probe(void)
 {

arch/mips/kernel/i8253.c

@@ -18,16 +18,13 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER,
-	.name = "timer"
-};
-
 void __init setup_pit_timer(void)
 {
+	unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
+
 	clockevent_i8253_init(true);
-	setup_irq(0, &irq0);
+	if (request_irq(0, timer_interrupt, flags, "timer", NULL))
+		pr_err("Failed to request irq 0 (timer)\n");
 }
 
 static int __init init_pit_clocksource(void)

arch/mips/kernel/process.c

@@ -75,7 +75,9 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	lose_fpu(0);
 	clear_thread_flag(TIF_MSA_CTX_LIVE);
 	clear_used_math();
+#ifdef CONFIG_MIPS_FP_SUPPORT
 	atomic_set(&current->thread.bd_emu_frame, BD_EMUFRAME_NONE);
+#endif
 	init_dsp();
 	regs->cp0_epc = pc;
 	regs->regs[29] = sp;
@@ -176,7 +178,9 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
 	clear_tsk_thread_flag(p, TIF_FPUBOUND);
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
+#ifdef CONFIG_MIPS_FP_SUPPORT
 	atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
+#endif
 
 	if (clone_flags & CLONE_SETTLS)
 		ti->tp_value = tls;
@@ -650,8 +654,10 @@ unsigned long mips_stack_top(void)
 {
 	unsigned long top = TASK_SIZE & PAGE_MASK;
 
-	/* One page for branch delay slot "emulation" */
-	top -= PAGE_SIZE;
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
+		/* One page for branch delay slot "emulation" */
+		top -= PAGE_SIZE;
+	}
 
 	/* Space for the VDSO, data page & GIC user page */
 	top -= PAGE_ALIGN(current->thread.abi->vdso->size);

arch/mips/kernel/rtlx-mt.c

@@ -51,11 +51,6 @@ static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction rtlx_irq = {
-	.handler	= rtlx_interrupt,
-	.name		= "RTLX",
-};
-
 static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
 
 void _interrupt_sp(void)
@@ -124,8 +119,7 @@ int __init rtlx_module_init(void)
 		goto out_class;
 	}
 
-	rtlx_irq.dev_id = rtlx;
-	err = setup_irq(rtlx_irq_num, &rtlx_irq);
+	err = request_irq(rtlx_irq_num, rtlx_interrupt, 0, "RTLX", rtlx);
 	if (err)
 		goto out_class;
 

arch/mips/kernel/setup.c

@@ -28,6 +28,7 @@
 #include <linux/decompress/generic.h>
 #include <linux/of_fdt.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/dmi.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -799,6 +800,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	arch_mem_init(cmdline_p);
+	dmi_setup();
 
 	resource_init();
 	plat_smp_setup();

arch/mips/kernel/smp.c

@@ -207,25 +207,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq_resched = {
-	.handler	= ipi_resched_interrupt,
-	.flags		= IRQF_PERCPU,
-	.name		= "IPI resched"
-};
-
-static struct irqaction irq_call = {
-	.handler	= ipi_call_interrupt,
-	.flags		= IRQF_PERCPU,
-	.name		= "IPI call"
-};
-
-static void smp_ipi_init_one(unsigned int virq,
-				    struct irqaction *action)
+static void smp_ipi_init_one(unsigned int virq, const char *name,
+			     irq_handler_t handler)
 {
 	int ret;
 
 	irq_set_handler(virq, handle_percpu_irq);
-	ret = setup_irq(virq, action);
+	ret = request_irq(virq, handler, IRQF_PERCPU, name, NULL);
 	BUG_ON(ret);
 }
 
@@ -278,12 +266,15 @@ int mips_smp_ipi_allocate(const struct cpumask *mask)
 		int cpu;
 
 		for_each_cpu(cpu, mask) {
-			smp_ipi_init_one(call_virq + cpu, &irq_call);
-			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
+			smp_ipi_init_one(call_virq + cpu, "IPI call",
+					 ipi_call_interrupt);
+			smp_ipi_init_one(sched_virq + cpu, "IPI resched",
+					 ipi_resched_interrupt);
 		}
 	} else {
-		smp_ipi_init_one(call_virq, &irq_call);
-		smp_ipi_init_one(sched_virq, &irq_resched);
+		smp_ipi_init_one(call_virq, "IPI call", ipi_call_interrupt);
+		smp_ipi_init_one(sched_virq, "IPI resched",
+				 ipi_resched_interrupt);
 	}
 
 	return 0;
@@ -311,8 +302,8 @@ int mips_smp_ipi_free(const struct cpumask *mask)
 		int cpu;
 
 		for_each_cpu(cpu, mask) {
-			remove_irq(call_virq + cpu, &irq_call);
-			remove_irq(sched_virq + cpu, &irq_resched);
+			free_irq(call_virq + cpu, NULL);
+			free_irq(sched_virq + cpu, NULL);
 		}
 	}
 	irq_destroy_ipi(call_virq, mask);

arch/mips/kernel/vdso.c

@@ -71,10 +71,12 @@ subsys_initcall(init_vdso);
 
 static unsigned long vdso_base(void)
 {
-	unsigned long base;
+	unsigned long base = STACK_TOP;
 
-	/* Skip the delay slot emulation page */
-	base = STACK_TOP + PAGE_SIZE;
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
+		/* Skip the delay slot emulation page */
+		base += PAGE_SIZE;
+	}
 
 	if (current->flags & PF_RANDOMIZE) {
 		base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1);
@@ -95,14 +97,16 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	if (down_write_killable(&mm->mmap_sem))
 		return -EINTR;
 
-	/* Map delay slot emulation page */
-	base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
-			   VM_READ | VM_EXEC |
-			   VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
-			   0, NULL);
-	if (IS_ERR_VALUE(base)) {
-		ret = base;
-		goto out;
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
+		/* Map delay slot emulation page */
+		base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
+				VM_READ | VM_EXEC |
+				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				0, NULL);
+		if (IS_ERR_VALUE(base)) {
+			ret = base;
+			goto out;
+		}
 	}
 
 	/*

arch/mips/lasat/interrupt.c

@@ -90,14 +90,9 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-static struct irqaction cascade = {
-	.handler	= no_action,
-	.name		= "cascade",
-	.flags		= IRQF_NO_THREAD,
-};
-
 void __init arch_init_irq(void)
 {
+	int irq = LASAT_CASCADE_IRQ;
 	int i;
 
 	if (IS_LASAT_200()) {
@@ -119,5 +114,6 @@ void __init arch_init_irq(void)
 	for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
 		irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
 
-	setup_irq(LASAT_CASCADE_IRQ, &cascade);
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
 }

arch/mips/lib/delay.c

@@ -24,6 +24,8 @@
 #define GCC_DADDI_IMM_ASM() "r"
 #endif
 
+#ifndef CONFIG_HAVE_PLAT_DELAY
+
 void __delay(unsigned long loops)
 {
 	__asm__ __volatile__ (
@@ -63,3 +65,5 @@ void __ndelay(unsigned long ns)
 	__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
 }
 EXPORT_SYMBOL(__ndelay);
+
+#endif

arch/mips/lib/memcpy.S

@@ -598,6 +598,7 @@ SEXC(1)
 	 nop
 	.endm
 
+#ifndef CONFIG_HAVE_PLAT_MEMCPY
 	.align	5
 LEAF(memmove)
 EXPORT_SYMBOL(memmove)
@@ -665,6 +666,8 @@ EXPORT_SYMBOL(__copy_user)
 	/* Legacy Mode, user <-> user */
 	__BUILD_COPY_USER LEGACY_MODE USEROP USEROP
 
+#endif
+
 #ifdef CONFIG_EVA
 
 /*

arch/mips/loongson2ef/common/bonito-irq.c

@@ -30,11 +30,6 @@ static struct irq_chip bonito_irq_type = {
 	.irq_unmask	= bonito_irq_enable,
 };
 
-static struct irqaction __maybe_unused dma_timeout_irqaction = {
-	.handler	= no_action,
-	.name		= "dma_timeout",
-};
-
 void bonito_irq_init(void)
 {
 	u32 i;
@@ -44,6 +39,8 @@ void bonito_irq_init(void)
 					 handle_level_irq);
 
 #ifdef CONFIG_CPU_LOONGSON2E
-	setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+	i = LOONGSON_IRQ_BASE + 10;
+	if (request_irq(i, no_action, 0, "dma_timeout", NULL))
+		pr_err("Failed to request irq %d (dma_timeout)\n", i);
 #endif
 }

arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c

@@ -100,12 +100,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq5 = {
-	.handler = timer_interrupt,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER,
-	.name = "timer"
-};
-
 /*
  * Initialize the conversion factor and the min/max deltas of the clock event
  * structure and register the clock event source with the framework.
@@ -134,7 +128,9 @@ void __init setup_mfgpt0_timer(void)
 
 	clockevents_register_device(cd);
 
-	setup_irq(CS5536_MFGPT_INTR, &irq5);
+	if (request_irq(CS5536_MFGPT_INTR, timer_interrupt,
+			IRQF_NOBALANCING | IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to register timer interrupt\n");
 }
 
 /*

arch/mips/loongson2ef/fuloong-2e/irq.c

@@ -35,14 +35,10 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
 		spurious_interrupt();
 }
 
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-
 void __init mach_init_irq(void)
 {
+	int irq;
+
 	/* init all controller
 	 *   0-15	  ------> i8259 interrupt
 	 *   16-23	  ------> mips cpu interrupt
@@ -59,7 +55,11 @@ void __init mach_init_irq(void)
 	bonito_irq_init();
 
 	/* bonito irq at IP2 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
+	irq = MIPS_CPU_IRQ_BASE + 2;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
 	/* 8259 irq at IP5 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
+	irq = MIPS_CPU_IRQ_BASE + 5;
+	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", irq);
 }

arch/mips/loongson2ef/lemote-2f/irq.c

@@ -90,18 +90,6 @@ static irqreturn_t ip6_action(int cpl, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ip6_irqaction = {
-	.handler = ip6_action,
-	.name = "cascade",
-	.flags = IRQF_SHARED | IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
-};
-
 void __init mach_init_irq(void)
 {
 	/* init all controller
@@ -120,7 +108,11 @@ void __init mach_init_irq(void)
 	bonito_irq_init();
 
 	/* setup north bridge irq (bonito) */
-	setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+	if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
+			IRQF_SHARED | IRQF_NO_THREAD, "cascade", ip6_action))
+		pr_err("Failed to register north bridge cascade interrupt\n");
 	/* setup source bridge irq (i8259) */
-	setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+	if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
+			IRQF_NO_THREAD | IRQF_NO_SUSPEND, "cascade", NULL))
+		pr_err("Failed to register south bridge cascade interrupt\n");
 }

arch/mips/loongson32/common/irq.c

@@ -149,12 +149,6 @@ asmlinkage void plat_irq_dispatch(void)
 
 }
 
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-
 static void __init ls1x_irq_init(int base)
 {
 	int n;
@@ -176,12 +170,17 @@ static void __init ls1x_irq_init(int base)
 					 handle_level_irq);
 	}
 
-	setup_irq(INT0_IRQ, &cascade_irqaction);
-	setup_irq(INT1_IRQ, &cascade_irqaction);
-	setup_irq(INT2_IRQ, &cascade_irqaction);
-	setup_irq(INT3_IRQ, &cascade_irqaction);
+	if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
+	if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
+	if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
+	if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
 #if defined(CONFIG_LOONGSON1_LS1C)
-	setup_irq(INT4_IRQ, &cascade_irqaction);
+	if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
 #endif
 }
 

arch/mips/loongson32/common/time.c

@@ -176,13 +176,6 @@ static struct clock_event_device ls1x_clockevent = {
 	.tick_resume		= ls1x_clockevent_tick_resume,
 };
 
-static struct irqaction ls1x_pwmtimer_irqaction = {
-	.name		= "ls1x-pwmtimer",
-	.handler	= ls1x_clockevent_isr,
-	.dev_id		= &ls1x_clockevent,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-};
-
 static void __init ls1x_time_init(void)
 {
 	struct clock_event_device *cd = &ls1x_clockevent;
@@ -206,7 +199,10 @@ static void __init ls1x_time_init(void)
 	if (ret)
 		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
 
-	setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
+	if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
+			IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
+			&ls1x_clockevent))
+		pr_err("Failed to register ls1x-pwmtimer interrupt\n");
 }
 #endif /* CONFIG_CEVT_CSRC_LS1X */
 

arch/mips/loongson64/Makefile

@@ -2,7 +2,7 @@
 #
 # Makefile for Loongson-3 family machines
 #
-obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \
+obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \
 				setup.o init.o env.o time.o reset.o \
 
 obj-$(CONFIG_SMP)	+= smp.o

arch/mips/loongson64/env.c

@@ -17,6 +17,7 @@
 #include <asm/bootinfo.h>
 #include <loongson.h>
 #include <boot_param.h>
+#include <builtin_dtbs.h>
 #include <workarounds.h>
 
 u32 cpu_clock_freq;
@@ -120,6 +121,28 @@ void __init prom_init_env(void)
 		loongson_sysconf.cores_per_node - 1) /
 		loongson_sysconf.cores_per_node;
 
+	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) {
+		switch (read_c0_prid() & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON3A_R1:
+		case PRID_REV_LOONGSON3A_R2_0:
+		case PRID_REV_LOONGSON3A_R2_1:
+		case PRID_REV_LOONGSON3A_R3_0:
+		case PRID_REV_LOONGSON3A_R3_1:
+			loongson_fdt_blob = __dtb_loongson3_4core_rs780e_begin;
+			break;
+		case PRID_REV_LOONGSON3B_R1:
+		case PRID_REV_LOONGSON3B_R2:
+			loongson_fdt_blob = __dtb_loongson3_8core_rs780e_begin;
+			break;
+		default:
+			break;
+		}
+	}
+
+
+	if (!loongson_fdt_blob)
+		pr_err("Failed to determine built-in Loongson64 dtb\n");
+
 	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
 	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
 	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;

arch/mips/loongson64/hpet.c

@@ -187,12 +187,6 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
 	return IRQ_NONE;
 }
 
-static struct irqaction hpet_irq = {
-	.handler = hpet_irq_handler,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER,
-	.name = "hpet",
-};
-
 /*
  * hpet address assignation and irq setting should be done in bios.
  * but pmon don't do this, we just setup here directly.
@@ -224,6 +218,7 @@ static void hpet_setup(void)
 
 void __init setup_hpet_timer(void)
 {
+	unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *cd;
 
@@ -247,7 +242,8 @@ void __init setup_hpet_timer(void)
 	cd->min_delta_ticks = HPET_MIN_PROG_DELTA;
 
 	clockevents_register_device(cd);
-	setup_irq(HPET_T0_IRQ, &hpet_irq);
+	if (request_irq(HPET_T0_IRQ, hpet_irq_handler, flags, "hpet", NULL))
+		pr_err("Failed to request irq %d (hpet)\n", HPET_T0_IRQ);
 	pr_info("hpet clock event device register\n");
 }
 

arch/mips/loongson64/init.c

@@ -4,6 +4,7 @@
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  */
 
+#include <linux/irqchip.h>
 #include <linux/memblock.h>
 #include <asm/bootinfo.h>
 #include <asm/traps.h>
@@ -44,3 +45,8 @@ void __init prom_init(void)
 void __init prom_free_prom_memory(void)
 {
 }
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}

arch/mips/loongson64/irq.c

-// SPDX-License-Identifier: GPL-2.0
-#include <loongson.h>
-#include <irq.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-
-#include "smp.h"
-
-extern void loongson3_send_irq_by_ipi(int cpu, int irqs);
-
-unsigned int irq_cpu[16] = {[0 ... 15] = -1};
-unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
-unsigned int local_irq = 1<<0 | 1<<1 | 1<<2 | 1<<7 | 1<<8 | 1<<12;
-
-int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
-			  bool force)
-{
-	unsigned int cpu;
-	struct cpumask new_affinity;
-
-	/* I/O devices are connected on package-0 */
-	cpumask_copy(&new_affinity, affinity);
-	for_each_cpu(cpu, affinity)
-		if (cpu_data[cpu].package > 0)
-			cpumask_clear_cpu(cpu, &new_affinity);
-
-	if (cpumask_empty(&new_affinity))
-		return -EINVAL;
-
-	cpumask_copy(d->common->affinity, &new_affinity);
-
-	return IRQ_SET_MASK_OK_NOCOPY;
-}
-
-static void ht_irqdispatch(void)
-{
-	unsigned int i, irq;
-	struct irq_data *irqd;
-	struct cpumask affinity;
-
-	irq = LOONGSON_HT1_INT_VECTOR(0);
-	LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
-
-	for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
-		if (!(irq & (0x1 << ht_irq[i])))
-			continue;
-
-		/* handled by local core */
-		if (local_irq & (0x1 << ht_irq[i])) {
-			do_IRQ(ht_irq[i]);
-			continue;
-		}
-
-		irqd = irq_get_irq_data(ht_irq[i]);
-		cpumask_and(&affinity, irqd->common->affinity, cpu_active_mask);
-		if (cpumask_empty(&affinity)) {
-			do_IRQ(ht_irq[i]);
-			continue;
-		}
-
-		irq_cpu[ht_irq[i]] = cpumask_next(irq_cpu[ht_irq[i]], &affinity);
-		if (irq_cpu[ht_irq[i]] >= nr_cpu_ids)
-			irq_cpu[ht_irq[i]] = cpumask_first(&affinity);
-
-		if (irq_cpu[ht_irq[i]] == 0) {
-			do_IRQ(ht_irq[i]);
-			continue;
-		}
-
-		/* balanced by other cores */
-		loongson3_send_irq_by_ipi(irq_cpu[ht_irq[i]], (0x1 << ht_irq[i]));
-	}
-}
-
-#define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0)
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending;
-
-	pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & CAUSEF_IP7)
-		do_IRQ(LOONGSON_TIMER_IRQ);
-#if defined(CONFIG_SMP)
-	if (pending & CAUSEF_IP6)
-		loongson3_ipi_interrupt(NULL);
-#endif
-	if (pending & CAUSEF_IP3)
-		ht_irqdispatch();
-	if (pending & CAUSEF_IP2)
-		do_IRQ(LOONGSON_UART_IRQ);
-	if (pending & UNUSED_IPS) {
-		pr_err("%s : spurious interrupt\n", __func__);
-		spurious_interrupt();
-	}
-}
-
-static inline void mask_loongson_irq(struct irq_data *d) { }
-static inline void unmask_loongson_irq(struct irq_data *d) { }
-
- /* For MIPS IRQs which shared by all cores */
-static struct irq_chip loongson_irq_chip = {
-	.name		= "Loongson",
-	.irq_ack	= mask_loongson_irq,
-	.irq_mask	= mask_loongson_irq,
-	.irq_mask_ack	= mask_loongson_irq,
-	.irq_unmask	= unmask_loongson_irq,
-	.irq_eoi	= unmask_loongson_irq,
-};
-
-void irq_router_init(void)
-{
-	int i;
-
-	/* route LPC int to cpu core0 int 0 */
-	LOONGSON_INT_ROUTER_LPC =
-		LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0);
-	/* route HT1 int0 ~ int7 to cpu core0 INT1*/
-	for (i = 0; i < 8; i++)
-		LOONGSON_INT_ROUTER_HT1(i) =
-			LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1);
-	/* enable HT1 interrupt */
-	LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
-	/* enable router interrupt intenset */
-	LOONGSON_INT_ROUTER_INTENSET =
-		LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
-}
-
-void __init arch_init_irq(void)
-{
-	struct irq_chip *chip;
-
-	clear_c0_status(ST0_IM | ST0_BEV);
-
-	irq_router_init();
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	chip = irq_get_chip(I8259A_IRQ_BASE);
-	chip->irq_set_affinity = plat_set_irq_affinity;
-
-	irq_set_chip_and_handler(LOONGSON_UART_IRQ,
-			&loongson_irq_chip, handle_percpu_irq);
-	irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
-			&loongson_irq_chip, handle_percpu_irq);
-
-	set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-void fixup_irqs(void)
-{
-	irq_cpu_offline();
-	clear_c0_status(ST0_IM);
-}
-
-#endif

arch/mips/loongson64/numa.c

@@ -122,7 +122,7 @@ static unsigned long nid_to_addroffset(unsigned int nid)
 static void __init szmem(unsigned int node)
 {
 	u32 i, mem_type;
-	static unsigned long num_physpages = 0;
+	static unsigned long num_physpages;
 	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
 
 	/* Parse memory information and activate */