Skip to content

L
linux
Commit d7b90fc3 authored by Dave Jiang's avatar Dave Jiang Committed by Dan Williams
Browse files
Options

isci: fixup SAS iaf protocols data structure 

Moved the actual data structure that's read from the phy register to phy
header.  Removed the parsing of identify address frame protocol bits as
that seemed not necessary and we can use existing information.
Signed-off-by: default avatarDave Jiang <dave.jiang@intel.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
parent f700ad43
Hide whitespace changes
Inline Side-by-side
Showing with 59 additions and 138 deletions
drivers/scsi/isci/core/intel_sas.h
View file @ d7b90fc3
......@@ -84,33 +84,6 @@ struct sci_sas_address {
};
/**
* struct sci_sas_identify_address_frame_protocols - This structure depicts the
* contents of bytes 2 and 3 in the SAS IDENTIFY ADDRESS FRAME (IAF).
*
* For specific information on each of these individual fields please reference
* the SAS specification Link layer section on address frames.
*/
struct sci_sas_identify_address_frame_protocols {
union {
struct {
u16 restricted1:1;
u16 smp_initiator:1;
u16 stp_initiator:1;
u16 ssp_initiator:1;
u16 reserved3:4;
u16 restricted2:1;
u16 smp_target:1;
u16 stp_target:1;
u16 ssp_target:1;
u16 reserved4:4;
} bits;
u16 all;
} u;
};
/**
* enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
* specification defined task attribute values for a command information
......
drivers/scsi/isci/core/scic_phy.h
View file @ d7b90fc3
......@@ -103,6 +103,26 @@ struct scic_phy_cap {
};
} __packed;
/* this data structure reflects the link layer transmit identification reg */
struct scic_phy_proto {
union {
struct {
u16 _r_a:1;
u16 smp_iport:1;
u16 stp_iport:1;
u16 ssp_iport:1;
u16 _r_b:4;
u16 _r_c:1;
u16 smp_tport:1;
u16 stp_tport:1;
u16 ssp_tport:1;
u16 _r_d:4;
};
u16 all;
};
} __packed;
/**
* struct scic_phy_properties - This structure defines the properties common to
* all phys that can be retrieved.
......@@ -123,17 +143,11 @@ struct scic_phy_properties {
*/
enum sas_linkrate negotiated_link_rate;
/**
* This field indicates the protocols supported by the phy.
*/
struct sci_sas_identify_address_frame_protocols protocols;
/**
* This field specifies the index of the phy in relation to other
* phys within the controller. This index is zero relative.
*/
u8 index;
};
/**
......
drivers/scsi/isci/core/scic_port.h
View file @ d7b90fc3
......@@ -57,6 +57,7 @@
#define _SCIC_PORT_H_
#include "sci_status.h"
#include "scic_phy.h"
#include "intel_sas.h"
struct scic_sds_port;
......@@ -72,8 +73,7 @@ enum scic_port_not_ready_reason_code {
struct scic_port_end_point_properties {
struct sci_sas_address sas_address;
struct sci_sas_identify_address_frame_protocols protocols;
struct scic_phy_proto protocols;
};
struct scic_port_properties {
......
drivers/scsi/isci/core/scic_sds_phy.c
View file @ d7b90fc3
......@@ -442,37 +442,15 @@ void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy,
memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE);
}
void scic_sds_phy_get_protocols(
struct scic_sds_phy *sci_phy,
struct sci_sas_identify_address_frame_protocols *protocols)
void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy,
struct scic_phy_proto *protocols)
{
protocols->u.all =
protocols->all =
(u16)(readl(&sci_phy->
link_layer_registers->transmit_identification) &
0x0000FFFF);
}
void scic_sds_phy_get_attached_phy_protocols(
struct scic_sds_phy *sci_phy,
struct sci_sas_identify_address_frame_protocols *protocols)
{
protocols->u.all = 0;
if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
struct isci_phy *iphy = sci_phy->iphy;
struct sas_identify_frame *iaf;
iaf = &iphy->frame_rcvd.iaf;
memcpy(&protocols->u.all, &iaf->initiator_bits, 2);
} else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA)
protocols->u.bits.stp_target = 1;
}
/*
* *****************************************************************************
* * SCIC SDS PHY Handler Redirects
* ***************************************************************************** */
/**
* This method will attempt to start the phy object. This request is only valid
* when the phy is in the stopped state
......
drivers/scsi/isci/core/scic_sds_phy.h
View file @ d7b90fc3
......@@ -57,6 +57,7 @@
#define _SCIC_SDS_PHY_H_
#include "intel_sas.h"
#include "scic_phy.h"
#include "scu_registers.h"
#include "sci_base_state_machine.h"
#include <scsi/libsas.h>
......@@ -438,11 +439,7 @@ void scic_sds_phy_get_attached_sas_address(
struct sci_sas_address *sas_address);
void scic_sds_phy_get_protocols(
struct scic_sds_phy *this_phy,
struct sci_sas_identify_address_frame_protocols *protocols);
void scic_sds_phy_get_attached_phy_protocols(
struct scic_sds_phy *this_phy,
struct sci_sas_identify_address_frame_protocols *protocols);
struct scic_sds_phy *sci_phy,
struct scic_phy_proto *protocols);
#endif /* _SCIC_SDS_PHY_H_ */
drivers/scsi/isci/core/scic_sds_port.c
View file @ d7b90fc3
......@@ -53,6 +53,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "sas.h"
#include "intel_sas.h"
#include "scic_controller.h"
#include "scic_phy.h"
......@@ -362,33 +363,32 @@ void scic_sds_port_get_sas_address(
}
}
/**
* This method will indicate which protocols are supported by this port.
/*
* This function will indicate which protocols are supported by this port.
* @sci_port: a handle corresponding to the SAS port for which to return the
* supported protocols.
* @protocols: This parameter specifies a pointer to an IAF protocol field
* structure into which the core will copy the protocol values for the port.
* The values are returned as part of a bit mask in order to allow for
* multi-protocol support.
*
* @protocols: This parameter specifies a pointer to a data structure
* which the core will copy the protocol values for the port from the
* transmit_identification register.
*/
static void scic_sds_port_get_protocols(
struct scic_sds_port *sci_port,
struct sci_sas_identify_address_frame_protocols *protocols)
static void
scic_sds_port_get_protocols(struct scic_sds_port *sci_port,
struct scic_phy_proto *protocols)
{
u8 index;
protocols->u.all = 0;
protocols->all = 0;
for (index = 0; index < SCI_MAX_PHYS; index++) {
if (sci_port->phy_table[index] != NULL) {
scic_sds_phy_get_protocols(sci_port->phy_table[index], protocols);
scic_sds_phy_get_protocols(sci_port->phy_table[index],
protocols);
}
}
}
/**
* This method requests the SAS address for the device directly attached to
/*
* This function requests the SAS address for the device directly attached to
* this SAS port.
* @sci_port: a handle corresponding to the SAS port for which to return the
* SAS address.
......@@ -401,21 +401,20 @@ void scic_sds_port_get_attached_sas_address(
struct scic_sds_port *sci_port,
struct sci_sas_address *sas_address)
{
struct sci_sas_identify_address_frame_protocols protocols;
struct scic_sds_phy *phy;
struct scic_sds_phy *sci_phy;
/*
* Ensure that the phy is both part of the port and currently
* connected to the remote end-point. */
phy = scic_sds_port_get_a_connected_phy(sci_port);
if (phy != NULL) {
scic_sds_phy_get_attached_phy_protocols(phy, &protocols);
if (!protocols.u.bits.stp_target) {
scic_sds_phy_get_attached_sas_address(phy, sas_address);
* connected to the remote end-point.
*/
sci_phy = scic_sds_port_get_a_connected_phy(sci_port);
if (sci_phy) {
if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) {
scic_sds_phy_get_attached_sas_address(sci_phy,
sas_address);
} else {
scic_sds_phy_get_sas_address(phy, sas_address);
sas_address->low += phy->phy_index;
scic_sds_phy_get_sas_address(sci_phy, sas_address);
sas_address->low += sci_phy->phy_index;
}
} else {
sas_address->high = 0;
......@@ -423,33 +422,6 @@ void scic_sds_port_get_attached_sas_address(
}
}
/**
* This method will indicate which protocols are supported by this remote
* device.
* @sci_port: a handle corresponding to the SAS port for which to return the
* supported protocols.
* @protocols: This parameter specifies a pointer to an IAF protocol field
* structure into which the core will copy the protocol values for the port.
* The values are returned as part of a bit mask in order to allow for
* multi-protocol support.
*
*/
static void scic_sds_port_get_attached_protocols(
struct scic_sds_port *sci_port,
struct sci_sas_identify_address_frame_protocols *protocols)
{
struct scic_sds_phy *phy;
/*
* Ensure that the phy is both part of the port and currently
* connected to the remote end-point. */
phy = scic_sds_port_get_a_connected_phy(sci_port);
if (phy != NULL)
scic_sds_phy_get_attached_phy_protocols(phy, protocols);
else
protocols->u.all = 0;
}
/**
* scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround
*
......@@ -595,7 +567,6 @@ enum sci_status scic_port_get_properties(
scic_sds_port_get_sas_address(port, &prop->local.sas_address);
scic_sds_port_get_protocols(port, &prop->local.protocols);
scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address);
scic_sds_port_get_attached_protocols(port, &prop->remote.protocols);
return SCI_SUCCESS;
}
......@@ -655,14 +626,10 @@ static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy,
bool do_notify_user)
{
struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port);
struct sci_sas_identify_address_frame_protocols protocols;
struct scic_sds_controller *scic = sci_port->owning_controller;
struct isci_host *ihost = scic->ihost;
scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols);
/* If this is sata port then the phy has already been resumed */
if (!protocols.u.bits.stp_target)
if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA)
scic_sds_phy_resume(sci_phy);
sci_port->active_phy_mask |= 1 << sci_phy->phy_index;
......@@ -803,15 +770,9 @@ bool scic_sds_port_link_detected(
struct scic_sds_port *sci_port,
struct scic_sds_phy *sci_phy)
{
struct sci_sas_identify_address_frame_protocols protocols;
scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols);
if (
(sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT)
&& (protocols.u.bits.stp_target)
&& scic_sds_port_is_wide(sci_port)
) {
if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
(sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) &&
scic_sds_port_is_wide(sci_port)) {
scic_sds_port_invalid_link_up(sci_port, sci_phy);
return false;
......
drivers/scsi/isci/port.c
View file @ d7b90fc3
......@@ -187,7 +187,7 @@ void isci_port_link_up(
scic_port_get_properties(port, &properties);
if (properties.remote.protocols.u.bits.stp_target) {
if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) {
u64 attached_sas_address;
isci_phy->sas_phy.oob_mode = SATA_OOB_MODE;
......@@ -207,9 +207,7 @@ void isci_port_link_up(
memcpy(&isci_phy->sas_phy.attached_sas_addr,
&attached_sas_address, sizeof(attached_sas_address));
} else if (properties.remote.protocols.u.bits.ssp_target ||
properties.remote.protocols.u.bits.smp_target) {
} else if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
isci_phy->sas_phy.oob_mode = SAS_OOB_MODE;
isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7