Commit d80aa842 authored by Christian Borntraeger's avatar Christian Borntraeger Committed by Greg Kroah-Hartman

s390/kvm: do not rely on the ILC on kvm host protection fauls

commit c0e7bb38 upstream.

For most cases a protection exception in the host (e.g. copy
on write or dirty tracking) on the sie instruction will indicate
an instruction length of 4. Turns out that there are some corner
cases (e.g. runtime instrumentation) where this is not necessarily
true and the ILC is unpredictable.

Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for
all possible ILCs.
Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent afb415f7
......@@ -229,12 +229,17 @@ ENTRY(sie64a)
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
.Lsie_done:
# some program checks are suppressing. C code (e.g. do_protection_exception)
# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
# instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use a nop (47 00 00 00) as a landing pad.
# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
# Other instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
# See also .Lcleanup_sie
.Lrewind_pad:
nop 0
.Lrewind_pad6:
nopr 7
.Lrewind_pad4:
nopr 7
.Lrewind_pad2:
nopr 7
.globl sie_exit
sie_exit:
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
......@@ -247,7 +252,9 @@ sie_exit:
stg %r14,__SF_EMPTY+16(%r15) # set exit reason code
j sie_exit
EX_TABLE(.Lrewind_pad,.Lsie_fault)
EX_TABLE(.Lrewind_pad6,.Lsie_fault)
EX_TABLE(.Lrewind_pad4,.Lsie_fault)
EX_TABLE(.Lrewind_pad2,.Lsie_fault)
EX_TABLE(sie_exit,.Lsie_fault)
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment