hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'

The 'currpage' and 'currphase' variables in struct pmbus_data are used by
the PMBus core to determine if the phase or page value has changed. Both
are initialized with values which are never expected to be set in the code
to ensure that the first page/phase write operation is actually performed.

This is not well explained and occasionally causes confusion. Change the
type of both variables to s16 and initialize with -1 to ensure that the
initial value never matches a requested value, and clarify that this
value means "unknown/unset".

Cc: Alex Qiu <xqiu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/pmbus/pmbus_core.c

@@ -109,8 +109,8 @@ struct pmbus_data {
 	bool has_status_word;		/* device uses STATUS_WORD register */
 	int (*read_status)(struct i2c_client *client, int page);
 
-	u8 currpage;
-	u8 currphase;	/* current phase, 0xff for all */
+	s16 currpage;	/* current page, -1 for unknown/unset */
+	s16 currphase;	/* current phase, 0xff for all, -1 for unknown/unset */
 };
 
 struct pmbus_debugfs_entry {
@@ -2529,8 +2529,8 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
 	if (pdata)
 		data->flags = pdata->flags;
 	data->info = info;
-	data->currpage = 0xff;
-	data->currphase = 0xfe;
+	data->currpage = -1;
+	data->currphase = -1;
 
 	ret = pmbus_init_common(client, data, info);
 	if (ret < 0)