x86/paravirt: Prevent rtc_cmos platform device init on PV guests

Adding the rtc platform device in non-privileged Xen PV guests causes
an IRQ conflict because these guests do not have legacy PIC and may
allocate irqs in the legacy range.

In a single VCPU Xen PV guest we should have:

/proc/interrupts:
           CPU0
  0:       4934  xen-percpu-virq      timer0
  1:          0  xen-percpu-ipi       spinlock0
  2:          0  xen-percpu-ipi       resched0
  3:          0  xen-percpu-ipi       callfunc0
  4:          0  xen-percpu-virq      debug0
  5:          0  xen-percpu-ipi       callfuncsingle0
  6:          0  xen-percpu-ipi       irqwork0
  7:        321   xen-dyn-event     xenbus
  8:         90   xen-dyn-event     hvc_console
  ...

But hvc_console cannot get its interrupt because it is already in use
by rtc0 and the console does not work.

  genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0)

We can avoid this problem by realizing that unprivileged PV guests (both
Xen and lguests) are not supposed to have rtc_cmos device and so
adding it is not necessary.

Privileged guests (i.e. Xen's dom0) do use it but they should not have
irq conflicts since they allocate irqs above legacy range (above
gsi_top, in fact).

Instead of explicitly testing whether the guest is privileged we can
extend pv_info structure to include information about guest's RTC
support.
Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: vkuznets@redhat.com
Cc: xen-devel@lists.xenproject.org
Cc: konrad.wilk@oracle.com
Cc: stable@vger.kernel.org # 4.2+
Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

arch/x86/include/asm/paravirt.h

@@ -19,6 +19,12 @@ static inline int paravirt_enabled(void)
 	return pv_info.paravirt_enabled;
 }
 
+static inline int paravirt_has_feature(unsigned int feature)
+{
+	WARN_ON_ONCE(!pv_info.paravirt_enabled);
+	return (pv_info.features & feature);
+}
+
 static inline void load_sp0(struct tss_struct *tss,
 			     struct thread_struct *thread)
 {

arch/x86/include/asm/paravirt_types.h

@@ -70,9 +70,14 @@ struct pv_info {
 #endif
 
 	int paravirt_enabled;
+	unsigned int features;	  /* valid only if paravirt_enabled is set */
 	const char *name;
 };
 
+#define paravirt_has(x) paravirt_has_feature(PV_SUPPORTED_##x)
+/* Supported features */
+#define PV_SUPPORTED_RTC        (1<<0)
+
 struct pv_init_ops {
 	/*
 	 * Patch may replace one of the defined code sequences with

arch/x86/include/asm/processor.h

@@ -472,6 +472,7 @@ static inline unsigned long current_top_of_stack(void)
 #else
 #define __cpuid			native_cpuid
 #define paravirt_enabled()	0
+#define paravirt_has(x) 	0
 
 static inline void load_sp0(struct tss_struct *tss,
 			    struct thread_struct *thread)

arch/x86/kernel/rtc.c

@@ -200,6 +200,9 @@ static __init int add_rtc_cmos(void)
 	}
 #endif
 
+	if (paravirt_enabled() && !paravirt_has(RTC))
+		return -ENODEV;
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");

arch/x86/lguest/boot.c

@@ -1414,6 +1414,7 @@ __init void lguest_init(void)
 	pv_info.kernel_rpl = 1;
 	/* Everyone except Xen runs with this set. */
 	pv_info.shared_kernel_pmd = 1;
+	pv_info.features = 0;
 
 	/*
 	 * We set up all the lguest overrides for sensitive operations.  These

arch/x86/xen/enlighten.c

@@ -1192,7 +1192,7 @@ static const struct pv_info xen_info __initconst = {
 #ifdef CONFIG_X86_64
 	.extra_user_64bit_cs = FLAT_USER_CS64,
 #endif
-
+	.features = 0,
 	.name = "Xen",
 };
 
@@ -1535,6 +1535,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
+	if (xen_initial_domain())
+		pv_info.features |= PV_SUPPORTED_RTC;
 	pv_init_ops = xen_init_ops;
 	pv_apic_ops = xen_apic_ops;
 	if (!xen_pvh_domain()) {