Commit d94a0a38 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Greg Kroah-Hartman

serial: sh-sci: Standardize on using the BIT() macro to define register bits

Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 31f90796
#include <linux/bitops.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
......@@ -32,62 +33,62 @@ enum {
/* SCSMR (Serial Mode Register) */
#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */
#define SCSMR_PE (1 << 5) /* Parity Enable */
#define SCSMR_ODD (1 << 4) /* Odd Parity */
#define SCSMR_STOP (1 << 3) /* Stop Bit Length */
#define SCSMR_CKS 0x0003 /* Clock Select */
#define SCSMR_CHR BIT(6) /* 7-bit Character Length */
#define SCSMR_PE BIT(5) /* Parity Enable */
#define SCSMR_ODD BIT(4) /* Odd Parity */
#define SCSMR_STOP BIT(3) /* Stop Bit Length */
#define SCSMR_CKS 0x0003 /* Clock Select */
/* Serial Control Register, SCIFA/SCIFB only bits */
#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */
#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */
/* SCxSR (Serial Status Register) on SCI */
#define SCI_TDRE 0x80 /* Transmit Data Register Empty */
#define SCI_RDRF 0x40 /* Receive Data Register Full */
#define SCI_ORER 0x20 /* Overrun Error */
#define SCI_FER 0x10 /* Framing Error */
#define SCI_PER 0x08 /* Parity Error */
#define SCI_TEND 0x04 /* Transmit End */
#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */
#define SCI_RDRF BIT(6) /* Receive Data Register Full */
#define SCI_ORER BIT(5) /* Overrun Error */
#define SCI_FER BIT(4) /* Framing Error */
#define SCI_PER BIT(3) /* Parity Error */
#define SCI_TEND BIT(2) /* Transmit End */
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
/* SCxSR (Serial Status Register) on SCIF, HSCIF */
#define SCIF_ER 0x0080 /* Receive Error */
#define SCIF_TEND 0x0040 /* Transmission End */
#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */
#define SCIF_BRK 0x0010 /* Break Detect */
#define SCIF_FER 0x0008 /* Framing Error */
#define SCIF_PER 0x0004 /* Parity Error */
#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */
#define SCIF_DR 0x0001 /* Receive Data Ready */
#define SCIF_ER BIT(7) /* Receive Error */
#define SCIF_TEND BIT(6) /* Transmission End */
#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */
#define SCIF_BRK BIT(4) /* Break Detect */
#define SCIF_FER BIT(3) /* Framing Error */
#define SCIF_PER BIT(2) /* Parity Error */
#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */
#define SCIF_DR BIT(0) /* Receive Data Ready */
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
/* SCFCR (FIFO Control Register) */
#define SCFCR_MCE 0x0008 /* Modem Control Enable */
#define SCFCR_TFRST 0x0004 /* Transmit FIFO Data Register Reset */
#define SCFCR_RFRST 0x0002 /* Receive FIFO Data Register Reset */
#define SCFCR_LOOP (1 << 0) /* Loopback Test */
#define SCFCR_MCE BIT(3) /* Modem Control Enable */
#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */
#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */
#define SCFCR_LOOP BIT(0) /* Loopback Test */
/* SCSPTR (Serial Port Register), optional */
#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */
#define SCSPTR_RTSDT (1 << 6) /* Serial Port RTS Pin Data */
#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */
#define SCSPTR_CTSDT (1 << 4) /* Serial Port CTS Pin Data */
#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */
#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */
#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS Pin Input/Output */
#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS Pin Data */
#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS Pin Input/Output */
#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS Pin Data */
#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */
#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */
/* HSSRR HSCIF */
#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */
/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
#define SCPCR_RTSC (1 << 4) /* Serial Port RTS Pin / Output Pin */
#define SCPCR_CTSC (1 << 3) /* Serial Port CTS Pin / Input Pin */
#define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */
#define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */
/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
#define SCPDR_RTSD (1 << 4) /* Serial Port RTS Output Pin Data */
#define SCPDR_CTSD (1 << 3) /* Serial Port CTS Input Pin Data */
#define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */
#define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
......
#ifndef __LINUX_SERIAL_SCI_H
#define __LINUX_SERIAL_SCI_H
#include <linux/bitops.h>
#include <linux/serial_core.h>
#include <linux/sh_dma.h>
......@@ -11,14 +12,14 @@
#define SCIx_NOT_SUPPORTED (-1)
/* Serial Control Register (@ = not supported by all parts) */
#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */
#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */
#define SCSCR_TE (1 << 5) /* Transmit Enable */
#define SCSCR_RE (1 << 4) /* Receive Enable */
#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */
#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */
#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */
#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */
#define SCSCR_TIE BIT(7) /* Transmit Interrupt Enable */
#define SCSCR_RIE BIT(6) /* Receive Interrupt Enable */
#define SCSCR_TE BIT(5) /* Transmit Enable */
#define SCSCR_RE BIT(4) /* Receive Enable */
#define SCSCR_REIE BIT(3) /* Receive Error Interrupt Enable @ */
#define SCSCR_TOIE BIT(2) /* Timeout Interrupt Enable @ */
#define SCSCR_CKE1 BIT(1) /* Clock Enable 1 */
#define SCSCR_CKE0 BIT(0) /* Clock Enable 0 */
enum {
......@@ -48,7 +49,7 @@ struct plat_sci_port_ops {
/*
* Port-specific capabilities
*/
#define SCIx_HAVE_RTSCTS (1 << 0)
#define SCIx_HAVE_RTSCTS BIT(0)
/*
* Platform device specific platform_data struct
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment