Commit db334784 authored by Romain Perier's avatar Romain Perier Committed by Heiko Stuebner

ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2

This commit adds the DT definition of the es8388 i2c device
found at address 0x10. It also adds the definition for connecting
the Rockchip I2S to the es8388 analog output.

This commit is based on the initial work that was done by Sjoerd Simons
<sjoerd.simons@collabora.com> with some improvements.
Signed-off-by: default avatarRomain Perier <romain.perier@collabora.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent c1ae3cfa
......@@ -136,7 +136,7 @@ vcc_ddr: REG1 {
regulator-always-on;
};
vcc_io: REG2 {
vcc_io: vccio_codec: REG2 {
regulator-name = "VCC_IO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
......
......@@ -86,6 +86,19 @@ spdif_out: spdif-out {
#sound-dai-cells = <0>;
};
sound-i2s {
compatible = "rockchip,rk3288-hdmi-analog";
pinctrl-names = "default";
pinctrl-0 = <&phone_ctl>, <&hp_det>;
rockchip,audio-codec = <&es8388>;
rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
rockchip,i2s-controller = <&i2s>;
rockchip,model = "I2S";
rockchip,routing = "Analog", "LOUT2",
"Analog", "ROUT2";
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&hym8563>;
......@@ -173,10 +186,28 @@ hym8563: hym8563@51 {
};
};
&i2c2 {
status = "okay";
es8388: es8388@10 {
compatible = "everest,es8388", "everest,es8328";
reg = <0x10>;
AVDD-supply = <&vccio_codec>;
DVDD-supply = <&vccio_codec>;
HPVDD-supply = <&vccio_codec>;
PVDD-supply = <&vccio_codec>;
clocks = <&cru SCLK_I2S0_OUT>;
};
};
&i2c5 {
status = "okay";
};
&i2s {
status = "okay";
};
&pinctrl {
ir {
ir_int: ir-int {
......@@ -190,6 +221,16 @@ pmic_int: pmic-int {
};
};
headphone {
hp_det: hp-det {
rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
};
phone_ctl: phone-ctl {
rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment