Commit db3df876 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab

media: rc: pwm-ir-tx: add new driver

This is new driver which uses pwm, so it is more power-efficient
than the bit banging gpio-ir-tx driver.
Signed-off-by: default avatarSean Young <sean@mess.org>
Reviewed-by: default avatarPavel Machek <pavel@ucw.cz>
Tested-by: default avatarMatthias Reichl <hias@horus.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 24d79ebc
...@@ -10794,6 +10794,12 @@ F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt ...@@ -10794,6 +10794,12 @@ F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt
F: Documentation/hwmon/pwm-fan F: Documentation/hwmon/pwm-fan
F: drivers/hwmon/pwm-fan.c F: drivers/hwmon/pwm-fan.c
PWM IR Transmitter
M: Sean Young <sean@mess.org>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/pwm-ir-tx.c
PWM SUBSYSTEM PWM SUBSYSTEM
M: Thierry Reding <thierry.reding@gmail.com> M: Thierry Reding <thierry.reding@gmail.com>
L: linux-pwm@vger.kernel.org L: linux-pwm@vger.kernel.org
......
...@@ -410,6 +410,18 @@ config IR_GPIO_TX ...@@ -410,6 +410,18 @@ config IR_GPIO_TX
To compile this driver as a module, choose M here: the module will To compile this driver as a module, choose M here: the module will
be called gpio-ir-tx. be called gpio-ir-tx.
config IR_PWM_TX
tristate "PWM IR transmitter"
depends on RC_CORE
depends on LIRC
depends on PWM
---help---
Say Y if you want to use a PWM based IR transmitter. This is
more power efficient than the bit banging gpio driver.
To compile this driver as a module, choose M here: the module will
be called pwm-ir-tx.
config RC_ST config RC_ST
tristate "ST remote control receiver" tristate "ST remote control receiver"
depends on RC_CORE depends on RC_CORE
......
...@@ -33,6 +33,7 @@ obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o ...@@ -33,6 +33,7 @@ obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
obj-$(CONFIG_IR_GPIO_TX) += gpio-ir-tx.o obj-$(CONFIG_IR_GPIO_TX) += gpio-ir-tx.o
obj-$(CONFIG_IR_PWM_TX) += pwm-ir-tx.o
obj-$(CONFIG_IR_IGORPLUGUSB) += igorplugusb.o obj-$(CONFIG_IR_IGORPLUGUSB) += igorplugusb.o
obj-$(CONFIG_IR_IGUANA) += iguanair.o obj-$(CONFIG_IR_IGUANA) += iguanair.o
obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
......
/*
* Copyright (C) 2017 Sean Young <sean@mess.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pwm.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <media/rc-core.h>
#define DRIVER_NAME "pwm-ir-tx"
#define DEVICE_NAME "PWM IR Transmitter"
struct pwm_ir {
struct pwm_device *pwm;
unsigned int carrier;
unsigned int duty_cycle;
};
static const struct of_device_id pwm_ir_of_match[] = {
{ .compatible = "pwm-ir-tx", },
{ },
};
MODULE_DEVICE_TABLE(of, pwm_ir_of_match);
static int pwm_ir_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
{
struct pwm_ir *pwm_ir = dev->priv;
pwm_ir->duty_cycle = duty_cycle;
return 0;
}
static int pwm_ir_set_carrier(struct rc_dev *dev, u32 carrier)
{
struct pwm_ir *pwm_ir = dev->priv;
if (!carrier)
return -EINVAL;
pwm_ir->carrier = carrier;
return 0;
}
static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
unsigned int count)
{
struct pwm_ir *pwm_ir = dev->priv;
struct pwm_device *pwm = pwm_ir->pwm;
int i, duty, period;
ktime_t edge;
long delta;
period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, pwm_ir->carrier);
duty = DIV_ROUND_CLOSEST(pwm_ir->duty_cycle * period, 100);
pwm_config(pwm, duty, period);
edge = ktime_get();
for (i = 0; i < count; i++) {
if (i % 2) // space
pwm_disable(pwm);
else
pwm_enable(pwm);
edge = ktime_add_us(edge, txbuf[i]);
delta = ktime_us_delta(edge, ktime_get());
if (delta > 0)
usleep_range(delta, delta + 10);
}
pwm_disable(pwm);
return count;
}
static int pwm_ir_probe(struct platform_device *pdev)
{
struct pwm_ir *pwm_ir;
struct rc_dev *rcdev;
int rc;
pwm_ir = devm_kmalloc(&pdev->dev, sizeof(*pwm_ir), GFP_KERNEL);
if (!pwm_ir)
return -ENOMEM;
pwm_ir->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(pwm_ir->pwm))
return PTR_ERR(pwm_ir->pwm);
pwm_ir->carrier = 38000;
pwm_ir->duty_cycle = 50;
rcdev = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW_TX);
if (!rcdev)
return -ENOMEM;
rcdev->priv = pwm_ir;
rcdev->driver_name = DRIVER_NAME;
rcdev->device_name = DEVICE_NAME;
rcdev->tx_ir = pwm_ir_tx;
rcdev->s_tx_duty_cycle = pwm_ir_set_duty_cycle;
rcdev->s_tx_carrier = pwm_ir_set_carrier;
rc = devm_rc_register_device(&pdev->dev, rcdev);
if (rc < 0)
dev_err(&pdev->dev, "failed to register rc device\n");
return rc;
}
static struct platform_driver pwm_ir_driver = {
.probe = pwm_ir_probe,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(pwm_ir_of_match),
},
};
module_platform_driver(pwm_ir_driver);
MODULE_DESCRIPTION("PWM IR Transmitter");
MODULE_AUTHOR("Sean Young <sean@mess.org>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment