Commit db455c78 authored by Valentine Barshak's avatar Valentine Barshak Committed by Simon Horman

ARM: shmobile: r8a7790: Fix I2C controller names

This fixes the issue introduced by the following commit:
b448c904 "ARM: shmobile: r8a7790: add I2C support"

The R8A7790 is an R-Car Gen2 SoC. The clock division factor
(CDF) width is 3 bits on Gen2 as opposed to 2 bits on Gen1.
Fix the device names for R8A7790 SoC to make the R-Car I2C
driver configure the hardware properly.

Changes in V2:
* rebased on top of the latest branch;
* capitalized ARM in the subject line;
* noted the commit that caused the issue in the log.
Signed-off-by: default avatarValentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent d85bcfa9
......@@ -292,13 +292,13 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
......
......@@ -81,7 +81,7 @@ static struct resource i2c_resources[] __initdata = {
#define r8a7790_register_i2c(idx) \
platform_device_register_simple( \
"i2c-rcar", idx, \
"i2c-rcar_gen2", idx, \
i2c_resources + (2 * idx), 2); \
void __init r8a7790_pinmux_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment