Merge branch 'for-usb-next' of...

Merge branch 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

* 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  xhci 1.0: Set transfer burst last packet count field.
  xhci 1.0: Set transfer burst count field.
  xhci 1.0: Update TD size field format.
  xhci 1.0: Only interrupt on short packet for IN EPs.
  xhci: Remove sparse warning about cmd_status.
  usbcore: warm reset USB3 port in SS.Inactive state
  usbcore: Refine USB3.0 device suspend and resume
  xHCI: report USB3.0 portstatus comply with USB3.0 specification
  xHCI: Set link state support
  xHCI: Clear link state change support
  xHCI: warm reset support
  usb/ch9: use proper endianess for wBytesPerInterval
  xhci: Remove recursive call to xhci_handle_event
  xhci: Add an assertion to check for virt_dev=0 bug.
  xhci: Add rmb() between reading event validity & event data access.
  xhci: Make xHCI driver endian-safe

drivers/usb/core/config.c

@@ -129,7 +129,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
 	else
 		max_tx = 999999;
-	if (desc->wBytesPerInterval > max_tx) {
+	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
 		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to %d\n",

drivers/usb/core/hub.c

@@ -379,15 +379,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 		*status = le16_to_cpu(hub->status->port.wPortStatus);
 		*change = le16_to_cpu(hub->status->port.wPortChange);
 
-		if ((hub->hdev->parent != NULL) &&
-				hub_is_superspeed(hub->hdev)) {
-			/* Translate the USB 3 port status */
-			u16 tmp = *status & USB_SS_PORT_STAT_MASK;
-			if (*status & USB_SS_PORT_STAT_POWER)
-				tmp |= USB_PORT_STAT_POWER;
-			*status = tmp;
-		}
-
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -2160,11 +2151,76 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	return status;
 }
 
+/* Warm reset a USB3 protocol port */
+static int hub_port_warm_reset(struct usb_hub *hub, int port)
+{
+	int ret;
+	u16 portstatus, portchange;
+
+	if (!hub_is_superspeed(hub->hdev)) {
+		dev_err(hub->intfdev, "only USB3 hub support warm reset\n");
+		return -EINVAL;
+	}
+
+	/* Warm reset the port */
+	ret = set_port_feature(hub->hdev,
+				port, USB_PORT_FEAT_BH_PORT_RESET);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot warm reset port %d\n", port);
+		return ret;
+	}
+
+	msleep(20);
+	ret = hub_port_status(hub, port, &portstatus, &portchange);
+
+	if (portchange & USB_PORT_STAT_C_RESET)
+		clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET);
+
+	if (portchange & USB_PORT_STAT_C_BH_RESET)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+
+	if (portchange & USB_PORT_STAT_C_LINK_STATE)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+
+	return ret;
+}
+
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
 #ifdef	CONFIG_PM
 
-#define MASK_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
-				USB_PORT_STAT_SUSPEND)
-#define WANT_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if ((portstatus & USB_PORT_STAT_LINK_STATE)
+				== USB_SS_PORT_LS_U3)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_SUSPEND)
+			ret = 1;
+	}
+
+	return ret;
+}
 
 /* Determine whether the device on a port is ready for a normal resume,
  * is ready for a reset-resume, or should be disconnected.
@@ -2174,7 +2230,9 @@ static int check_port_resume_type(struct usb_device *udev,
 		int status, unsigned portchange, unsigned portstatus)
 {
 	/* Is the device still present? */
-	if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+	if (status || port_is_suspended(hub, portstatus) ||
+			!port_is_power_on(hub, portstatus) ||
+			!(portstatus & USB_PORT_STAT_CONNECTION)) {
 		if (status >= 0)
 			status = -ENODEV;
 	}
@@ -2285,14 +2343,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
-	 * external hub.
-	 * FIXME: this is a temporary workaround to make the system able
-	 * to suspend/resume.
-	 */
-	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
-		status = clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_POWER);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U3 << 3),
+				USB_PORT_FEAT_LINK_STATE);
 	else
 		status = set_port_feature(hub->hdev, port1,
 						USB_PORT_FEAT_SUSPEND);
@@ -2439,7 +2493,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+	if (status == 0 && !port_is_suspended(hub, portstatus))
 		goto SuspendCleared;
 
 	// dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -2447,8 +2501,13 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	set_bit(port1, hub->busy_bits);
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
-	status = clear_port_feature(hub->hdev,
-			port1, USB_PORT_FEAT_SUSPEND);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U0 << 3),
+				USB_PORT_FEAT_LINK_STATE);
+	else
+		status = clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
 				port1, status);
@@ -2470,9 +2529,15 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
  SuspendCleared:
 	if (status == 0) {
-		if (portchange & USB_PORT_STAT_C_SUSPEND)
-			clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_SUSPEND);
+		if (hub_is_superspeed(hub->hdev)) {
+			if (portchange & USB_PORT_STAT_C_LINK_STATE)
+				clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
+		}
 	}
 
 	clear_bit(port1, hub->busy_bits);
@@ -3147,7 +3212,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 		/* maybe switch power back on (e.g. root hub was reset) */
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-				&& !(portstatus & USB_PORT_STAT_POWER))
+				&& !port_is_power_on(hub, portstatus))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
@@ -3490,6 +3555,16 @@ static void hub_events(void)
 						USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
 			}
 
+			/* Warm reset a USB3 protocol port if it's in
+			 * SS.Inactive state.
+			 */
+			if (hub_is_superspeed(hub->hdev) &&
+				(portstatus & USB_PORT_STAT_LINK_STATE)
+					== USB_SS_PORT_LS_SS_INACTIVE) {
+				dev_dbg(hub_dev, "warm reset port %d\n", i);
+				hub_port_warm_reset(hub, i);
+			}
+
 			if (connect_change)
 				hub_port_connect_change(hub, i,
 						portstatus, portchange);

drivers/usb/host/xhci-dbg.c

@@ -147,7 +147,7 @@ static void xhci_print_op_regs(struct xhci_hcd *xhci)
 
 static void xhci_print_ports(struct xhci_hcd *xhci)
 {
-	u32 __iomem *addr;
+	__le32 __iomem *addr;
 	int i, j;
 	int ports;
 	char *names[NUM_PORT_REGS] = {
@@ -253,27 +253,27 @@ void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb)
 void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 {
 	u64	address;
-	u32	type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
+	u32	type = le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK;
 
 	switch (type) {
 	case TRB_TYPE(TRB_LINK):
 		xhci_dbg(xhci, "Link TRB:\n");
 		xhci_print_trb_offsets(xhci, trb);
 
-		address = trb->link.segment_ptr;
+		address = le64_to_cpu(trb->link.segment_ptr);
 		xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
 
 		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
-				GET_INTR_TARGET(trb->link.intr_target));
+			 GET_INTR_TARGET(le32_to_cpu(trb->link.intr_target)));
 		xhci_dbg(xhci, "Cycle bit = %u\n",
-				(unsigned int) (trb->link.control & TRB_CYCLE));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_CYCLE));
 		xhci_dbg(xhci, "Toggle cycle bit = %u\n",
-				(unsigned int) (trb->link.control & LINK_TOGGLE));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & LINK_TOGGLE));
 		xhci_dbg(xhci, "No Snoop bit = %u\n",
-				(unsigned int) (trb->link.control & TRB_NO_SNOOP));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_NO_SNOOP));
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
-		address = trb->trans_event.buffer;
+		address = le64_to_cpu(trb->trans_event.buffer);
 		/*
 		 * FIXME: look at flags to figure out if it's an address or if
 		 * the data is directly in the buffer field.
@@ -281,11 +281,12 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
 		break;
 	case TRB_TYPE(TRB_COMPLETION):
-		address = trb->event_cmd.cmd_trb;
+		address = le64_to_cpu(trb->event_cmd.cmd_trb);
 		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
 		xhci_dbg(xhci, "Completion status = %u\n",
-				(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
-		xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
+			 (unsigned int) GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status)));
+		xhci_dbg(xhci, "Flags = 0x%x\n",
+			 (unsigned int) le32_to_cpu(trb->event_cmd.flags));
 		break;
 	default:
 		xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
@@ -311,16 +312,16 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
 {
 	int i;
-	u32 addr = (u32) seg->dma;
+	u64 addr = seg->dma;
 	union xhci_trb *trb = seg->trbs;
 
 	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
 		trb = &seg->trbs[i];
-		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
-				lower_32_bits(trb->link.segment_ptr),
-				upper_32_bits(trb->link.segment_ptr),
-				(unsigned int) trb->link.intr_target,
-				(unsigned int) trb->link.control);
+		xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr,
+			 (u32)lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 (u32)upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 (unsigned int) le32_to_cpu(trb->link.intr_target),
+			 (unsigned int) le32_to_cpu(trb->link.control));
 		addr += sizeof(*trb);
 	}
 }
@@ -391,18 +392,18 @@ void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
 
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 {
-	u32 addr = (u32) erst->erst_dma_addr;
+	u64 addr = erst->erst_dma_addr;
 	int i;
 	struct xhci_erst_entry *entry;
 
 	for (i = 0; i < erst->num_entries; ++i) {
 		entry = &erst->entries[i];
-		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
-				(unsigned int) addr,
-				lower_32_bits(entry->seg_addr),
-				upper_32_bits(entry->seg_addr),
-				(unsigned int) entry->seg_size,
-				(unsigned int) entry->rsvd);
+		xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n",
+			 addr,
+			 lower_32_bits(le64_to_cpu(entry->seg_addr)),
+			 upper_32_bits(le64_to_cpu(entry->seg_addr)),
+			 (unsigned int) le32_to_cpu(entry->seg_size),
+			 (unsigned int) le32_to_cpu(entry->rsvd));
 		addr += sizeof(*entry);
 	}
 }
@@ -436,7 +437,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
 {
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
 
-	switch (GET_SLOT_STATE(slot_ctx->dev_state)) {
+	switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
 	case 0:
 		return "enabled/disabled";
 	case 1:

drivers/usb/host/xhci.h

@@ -57,13 +57,13 @@
  * @run_regs_off:	RTSOFF - Runtime register space offset
  */
 struct xhci_cap_regs {
-	u32	hc_capbase;
-	u32	hcs_params1;
-	u32	hcs_params2;
-	u32	hcs_params3;
-	u32	hcc_params;
-	u32	db_off;
-	u32	run_regs_off;
+	__le32	hc_capbase;
+	__le32	hcs_params1;
+	__le32	hcs_params2;
+	__le32	hcs_params3;
+	__le32	hcc_params;
+	__le32	db_off;
+	__le32	run_regs_off;
 	/* Reserved up to (CAPLENGTH - 0x1C) */
 };
 
@@ -155,26 +155,26 @@ struct xhci_cap_regs {
  * 			devices.
  */
 struct xhci_op_regs {
-	u32	command;
-	u32	status;
-	u32	page_size;
-	u32	reserved1;
-	u32	reserved2;
-	u32	dev_notification;
-	u64	cmd_ring;
+	__le32	command;
+	__le32	status;
+	__le32	page_size;
+	__le32	reserved1;
+	__le32	reserved2;
+	__le32	dev_notification;
+	__le64	cmd_ring;
 	/* rsvd: offset 0x20-2F */
-	u32	reserved3[4];
-	u64	dcbaa_ptr;
-	u32	config_reg;
+	__le32	reserved3[4];
+	__le64	dcbaa_ptr;
+	__le32	config_reg;
 	/* rsvd: offset 0x3C-3FF */
-	u32	reserved4[241];
+	__le32	reserved4[241];
 	/* port 1 registers, which serve as a base address for other ports */
-	u32	port_status_base;
-	u32	port_power_base;
-	u32	port_link_base;
-	u32	reserved5;
+	__le32	port_status_base;
+	__le32	port_power_base;
+	__le32	port_link_base;
+	__le32	reserved5;
 	/* registers for ports 2-255 */
-	u32	reserved6[NUM_PORT_REGS*254];
+	__le32	reserved6[NUM_PORT_REGS*254];
 };
 
 /* USBCMD - USB command - command bitmasks */
@@ -382,12 +382,12 @@ struct xhci_op_regs {
  * updates the dequeue pointer.
  */
 struct xhci_intr_reg {
-	u32	irq_pending;
-	u32	irq_control;
-	u32	erst_size;
-	u32	rsvd;
-	u64	erst_base;
-	u64	erst_dequeue;
+	__le32	irq_pending;
+	__le32	irq_control;
+	__le32	erst_size;
+	__le32	rsvd;
+	__le64	erst_base;
+	__le64	erst_dequeue;
 };
 
 /* irq_pending bitmasks */
@@ -432,8 +432,8 @@ struct xhci_intr_reg {
  * or larger accesses"
  */
 struct xhci_run_regs {
-	u32			microframe_index;
-	u32			rsvd[7];
+	__le32			microframe_index;
+	__le32			rsvd[7];
 	struct xhci_intr_reg	ir_set[128];
 };
 
@@ -447,7 +447,7 @@ struct xhci_run_regs {
  * Section 5.6
  */
 struct xhci_doorbell_array {
-	u32	doorbell[256];
+	__le32	doorbell[256];
 };
 
 #define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
@@ -504,12 +504,12 @@ struct xhci_container_ctx {
  * reserved at the end of the slot context for HC internal use.
  */
 struct xhci_slot_ctx {
-	u32	dev_info;
-	u32	dev_info2;
-	u32	tt_info;
-	u32	dev_state;
+	__le32	dev_info;
+	__le32	dev_info2;
+	__le32	tt_info;
+	__le32	dev_state;
 	/* offset 0x10 to 0x1f reserved for HC internal use */
-	u32	reserved[4];
+	__le32	reserved[4];
 };
 
 /* dev_info bitmasks */
@@ -580,12 +580,12 @@ struct xhci_slot_ctx {
  * reserved at the end of the endpoint context for HC internal use.
  */
 struct xhci_ep_ctx {
-	u32	ep_info;
-	u32	ep_info2;
-	u64	deq;
-	u32	tx_info;
+	__le32	ep_info;
+	__le32	ep_info2;
+	__le64	deq;
+	__le32	tx_info;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
-	u32	reserved[3];
+	__le32	reserved[3];
 };
 
 /* ep_info bitmasks */
@@ -660,9 +660,9 @@ struct xhci_ep_ctx {
  * @add_context:	set the bit of the endpoint context you want to enable
  */
 struct xhci_input_control_ctx {
-	u32	drop_flags;
-	u32	add_flags;
-	u32	rsvd2[6];
+	__le32	drop_flags;
+	__le32	add_flags;
+	__le32	rsvd2[6];
 };
 
 /* Represents everything that is needed to issue a command on the command ring.
@@ -688,9 +688,9 @@ struct xhci_command {
 
 struct xhci_stream_ctx {
 	/* 64-bit stream ring address, cycle state, and stream type */
-	u64	stream_ring;
+	__le64	stream_ring;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
-	u32	reserved[2];
+	__le32	reserved[2];
 };
 
 /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
@@ -803,7 +803,7 @@ struct xhci_virt_device {
  */
 struct xhci_device_context_array {
 	/* 64-bit device addresses; we only write 32-bit addresses */
-	u64			dev_context_ptrs[MAX_HC_SLOTS];
+	__le64			dev_context_ptrs[MAX_HC_SLOTS];
 	/* private xHCD pointers */
 	dma_addr_t	dma;
 };
@@ -816,10 +816,10 @@ struct xhci_device_context_array {
 
 struct xhci_transfer_event {
 	/* 64-bit buffer address, or immediate data */
-	u64	buffer;
-	u32	transfer_len;
+	__le64	buffer;
+	__le32	transfer_len;
 	/* This field is interpreted differently based on the type of TRB */
-	u32	flags;
+	__le32	flags;
 };
 
 /** Transfer Event bit fields **/
@@ -898,9 +898,9 @@ struct xhci_transfer_event {
 
 struct xhci_link_trb {
 	/* 64-bit segment pointer*/
-	u64 segment_ptr;
-	u32 intr_target;
-	u32 control;
+	__le64 segment_ptr;
+	__le32 intr_target;
+	__le32 control;
 };
 
 /* control bitfields */
@@ -909,9 +909,9 @@ struct xhci_link_trb {
 /* Command completion event TRB */
 struct xhci_event_cmd {
 	/* Pointer to command TRB, or the value passed by the event data trb */
-	u64 cmd_trb;
-	u32 status;
-	u32 flags;
+	__le64 cmd_trb;
+	__le32 status;
+	__le32 flags;
 };
 
 /* flags bitmasks */
@@ -943,6 +943,8 @@ struct xhci_event_cmd {
 /* Interrupter Target - which MSI-X vector to target the completion event at */
 #define TRB_INTR_TARGET(p)	(((p) & 0x3ff) << 22)
 #define GET_INTR_TARGET(p)	(((p) >> 22) & 0x3ff)
+#define TRB_TBC(p)		(((p) & 0x3) << 7)
+#define TRB_TLBPC(p)		(((p) & 0xf) << 16)
 
 /* Cycle bit - indicates TRB ownership by HC or HCD */
 #define TRB_CYCLE		(1<<0)
@@ -970,7 +972,7 @@ struct xhci_event_cmd {
 #define TRB_SIA			(1<<31)
 
 struct xhci_generic_trb {
-	u32 field[4];
+	__le32 field[4];
 };
 
 union xhci_trb {
@@ -1118,10 +1120,10 @@ struct xhci_ring {
 
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
-	u64	seg_addr;
-	u32	seg_size;
+	__le64	seg_addr;
+	__le32	seg_size;
 	/* Set to zero */
-	u32	rsvd;
+	__le32	rsvd;
 };
 
 struct xhci_erst {
@@ -1286,10 +1288,10 @@ struct xhci_hcd {
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
 	u8			*port_array;
 	/* Array of pointers to USB 3.0 PORTSC registers */
-	u32 __iomem		**usb3_ports;
+	__le32 __iomem		**usb3_ports;
 	unsigned int		num_usb3_ports;
 	/* Array of pointers to USB 2.0 PORTSC registers */
-	u32 __iomem		**usb2_ports;
+	__le32 __iomem		**usb2_ports;
 	unsigned int		num_usb2_ports;
 };
 
@@ -1322,12 +1324,12 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
 /* TODO: copied from ehci.h - can be refactored? */
 /* xHCI spec says all registers are little endian */
 static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
-		__u32 __iomem *regs)
+		__le32 __iomem *regs)
 {
 	return readl(regs);
 }
 static inline void xhci_writel(struct xhci_hcd *xhci,
-		const unsigned int val, __u32 __iomem *regs)
+		const unsigned int val, __le32 __iomem *regs)
 {
 	xhci_dbg(xhci,
 			"`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
@@ -1345,7 +1347,7 @@ static inline void xhci_writel(struct xhci_hcd *xhci,
  * the high dword, and write order is irrelevant.
  */
 static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
-		__u64 __iomem *regs)
+		__le64 __iomem *regs)
 {
 	__u32 __iomem *ptr = (__u32 __iomem *) regs;
 	u64 val_lo = readl(ptr);
@@ -1353,7 +1355,7 @@ static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
 	return val_lo + (val_hi << 32);
 }
 static inline void xhci_write_64(struct xhci_hcd *xhci,
-		const u64 val, __u64 __iomem *regs)
+				 const u64 val, __le64 __iomem *regs)
 {
 	__u32 __iomem *ptr = (__u32 __iomem *) regs;
 	u32 val_lo = lower_32_bits(val);

include/linux/usb/ch9.h

@@ -579,7 +579,7 @@ struct usb_ss_ep_comp_descriptor {
 
 	__u8  bMaxBurst;
 	__u8  bmAttributes;
-	__u16 wBytesPerInterval;
+	__le16 wBytesPerInterval;
 } __attribute__ ((packed));
 
 #define USB_DT_SS_EP_COMP_SIZE		6