Merge tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
 "Accumulated fixes for ARC which I've been been sitting on for a while:

   - reading clk from driver vs device tree [Vlad]

   - fix support for UIO in VDK platform [Alexey]

   - SLC busy bit reading workaround

   - build warning with kprobes header reorg"

* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: fix build warnings with !CONFIG_KPROBES
  ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
  ARC: vdk: Fix support of UIO
  ARCv2: make unimplemented vectors as no-ops rather than halt core
  ARC: get rate from clk driver instead of reading device tree
  ARC: [dts] add cpu nodes to ARCHS SMP device tree
  ARC: [dts] add input clocks for cpu nodes

arch/arc/boot/dts/skeleton.dtsi

@@ -26,6 +26,7 @@ cpu@0 {
 			device_type = "cpu";
 			compatible = "snps,arc770d";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs.dtsi

@@ -21,6 +21,7 @@ cpu@0 {
 			device_type = "cpu";
 			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs_idu.dtsi

@@ -19,8 +19,27 @@ cpus {
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "snps,archs38xN";
+			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -112,13 +112,19 @@ mmc@0x15000 {
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+	};
 
-		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
-		uio_ev: uio@0xD0000000 {
-			compatible = "generic-uio";
-			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
-			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
-			interrupts = <23>;
-		};
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xEz-0xFz.
+	 */
+	uio_ev: uio@0xD0000000 {
+		compatible = "generic-uio";
+		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
 	};
 };

arch/arc/include/asm/kprobes.h

@@ -54,9 +54,7 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
 void kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
-static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
-{
-}
+#define trap_is_kprobe(address, regs)
 #endif /* CONFIG_KPROBES */
 
 #endif /* _ARC_KPROBES_H */

arch/arc/kernel/entry-arcv2.S

@@ -100,15 +100,21 @@ END(handle_interrupt)
 ;################### Non TLB Exception Handling #############################
 
 ENTRY(EV_SWI)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_SWI)
 
 ENTRY(EV_DivZero)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DivZero)
 
 ENTRY(EV_DCError)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DCError)
 
 ; ---------------------------------------------

arch/arc/kernel/setup.c

@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/root_dev.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
@@ -488,8 +489,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
-	struct device_node *core_clk = of_find_node_by_name(NULL, "core_clk");
-	u32 freq = 0;
+	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct clk *cpu_clk;
+	unsigned long freq = 0;
 
 	if (!cpu_online(cpu_id)) {
 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
@@ -502,9 +504,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
 
-	of_property_read_u32(core_clk, "clock-frequency", &freq);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
+			   cpu_id);
+	} else {
+		freq = clk_get_rate(cpu_clk);
+	}
 	if (freq)
-		seq_printf(m, "CPU speed\t: %u.%02u Mhz\n",
+		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
 			   freq / 1000000, (freq / 10000) % 100);
 
 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",

arch/arc/mm/cache.c

@@ -633,6 +633,9 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
 
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(r);
+
 	/* Important to wait for flush to complete */
 	while (read_aux_reg(r) & SLC_CTRL_BUSY);
 }