ARM: mvebu: dts: remove unneeded linux,default-state from led nodes

Generally, power LEDs should indicate when power is applied, and go out
once power is removed.  _Not_ annoy the developer with migraine-inducing
blinking reminicent of some badly animated television series designed to
sell sugar to children.

On a more serious note, most of these OS-specific properties aren't
necessary and should be removed.  I left two that are legitimately tying
disk LEDs to disk activity.  Other than that, we keep the state the
bootloader left them in until userspace changes the state via sysfs.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -74,13 +74,13 @@ gpio_leds {
 				green_pwr_led {
 					label = "mirabox:green:pwr";
 					gpios = <&gpio1 31 1>;
-					linux,default-trigger = "heartbeat";
+					default-state = "keep";
 				};
 
 				blue_stat_led {
 					label = "mirabox:blue:stat";
 					gpios = <&gpio2 0 1>;
-					linux,default-trigger = "cpu0";
+					default-state = "off";
 				};
 
 				green_stat_led {

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -138,7 +138,7 @@ &sata2_led_pin
 		blue_power_led {
 			label = "rn102:blue:pwr";
 			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
-			linux,default-trigger = "heartbeat";
+			default-state = "keep";
 		};
 
 		green_sata1_led {

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -103,8 +103,7 @@ yellow_led {
 				green_led {
 					label = "green_led";
 					gpios = <&gpio1 21 1>;
-					default-state = "off";
-					linux,default-trigger = "heartbeat";
+					default-state = "keep";
 				};
 			};
 

arch/arm/boot/dts/dove-cubox.dts

@@ -23,7 +23,7 @@ leds {
 		power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 	};
 

arch/arm/boot/dts/kirkwood-dns320.dts

@@ -25,7 +25,7 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
 		blue-power {
 			label = "dns320:blue:power";
 			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		blue-usb {
 			label = "dns320:blue:usb";

arch/arm/boot/dts/kirkwood-dns325.dts

@@ -25,7 +25,7 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
 		white-power {
 			label = "dns325:white:power";
 			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		white-usb {
 			label = "dns325:white:usb";

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -43,7 +43,7 @@ gpio-leds {
 		health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		fault {
 			label = "status:orange:fault";

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -86,7 +86,7 @@ &pmx_led_right_cap_2 &pmx_led_right_cap_3
 		health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		fault {
 			label = "status:orange:fault";

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -82,7 +82,7 @@ gpio-leds {
 		green-os {
 			label = "ib62x0:green:os";
 			gpios = <&gpio0 25 0>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		red-os {
 			label = "ib62x0:red:os";

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -95,12 +95,12 @@ &pmx_led_usb2 &pmx_led_usb3
 		led-level {
 			label = "led_level";
 			gpios = <&gpio1 9 0>;
-			linux,default-trigger = "default-on";
+			default-state = "on";
 		};
 		power-blue {
 			label = "power:blue";
 			gpios = <&gpio1 10 0>;
-			linux,default-trigger = "timer";
+			default-state = "keep";
 		};
 		power-red {
 			label = "power:red";

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -128,7 +128,7 @@ gpio-leds {
 		power_led {
 			label = "status:white:power_led";
 			gpios = <&gpio0 16 0>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		rebuild_led {
 			label = "status:white:rebuild_led";

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -150,7 +150,7 @@ led@3 {
 		led@4 {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 
 		led@5 {

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -113,7 +113,7 @@ &pmx_led_blue_disk1 &pmx_led_blue_disk2
 		power_led {
 			label = "status:blue:power_led";
 			gpios = <&gpio0 31 1>;   /* GPIO 31 Active Low */
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 		activity_led {
 			label = "status:blue:activity_led";

arch/arm/boot/dts/kirkwood-ns2lite.dts

@@ -26,7 +26,7 @@ gpio-leds {
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 1>;
-			linux,default-trigger = "default-on";
+			linux,default-trigger = "ide-disk";
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts

@@ -37,7 +37,7 @@ gpio-leds {
 		health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-sheevaplug.dts

@@ -32,7 +32,7 @@ gpio-leds {
 		health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 
 		misc {