Skip to content

L
linux
Commit dce32c78 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

parents c0758146 9ad98c5b
Hide whitespace changes
Inline Side-by-side
Showing with 103 additions and 341 deletions
arch/sparc/Kconfig
View file @ dce32c78
......@@ -25,62 +25,6 @@ source "init/Kconfig"
menu "General machine setup"
config VT
bool
select INPUT
default y
---help---
If you say Y here, you will get support for terminal devices with
display and keyboard devices. These are called "virtual" because you
can run several virtual terminals (also called virtual consoles) on
one physical terminal. This is rather useful, for example one
virtual terminal can collect system messages and warnings, another
one can be used for a text-mode user session, and a third could run
an X session, all in parallel. Switching between virtual terminals
is done with certain key combinations, usually Alt-<function key>.
The setterm command ("man setterm") can be used to change the
properties (such as colors or beeping) of a virtual terminal. The
man page console_codes(4) ("man console_codes") contains the special
character sequences that can be used to change those properties
directly. The fonts used on virtual terminals can be changed with
the setfont ("man setfont") command and the key bindings are defined
with the loadkeys ("man loadkeys") command.
You need at least one virtual terminal device in order to make use
of your keyboard and monitor. Therefore, only people configuring an
embedded system would want to say N here in order to save some
memory; the only way to log into such a system is then via a serial
or network connection.
If unsure, say Y, or else you won't be able to do much with your new
shiny Linux system :-)
config VT_CONSOLE
bool
default y
---help---
The system console is the device which receives all kernel messages
and warnings and which allows logins in single user mode. If you
answer Y here, a virtual terminal (the device used to interact with
a physical terminal) can be used as system console. This is the most
common mode of operations, so you should say Y here unless you want
the kernel messages be output only to a serial port (in which case
you should say Y to "Console on serial port", below).
If you do say Y here, by default the currently visible virtual
terminal (/dev/tty0) will be used as system console. You can change
that with a kernel command line option such as "console=tty3" which
would use the third virtual terminal as system console. (Try "man
bootparam" or see the documentation of your boot loader (lilo or
loadlin) about how to pass options to the kernel at boot time.)
If unsure, say Y.
config HW_CONSOLE
bool
default y
config SMP
bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
depends on BROKEN
......
arch/sparc64/kernel/entry.S
View file @ dce32c78
......@@ -97,8 +97,8 @@ do_fpdis:
faddd %f0, %f2, %f4
fmuld %f0, %f2, %f6
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_1:
sethi %hi(0), %g2
sethi %hi(sparc64_kern_sec_context), %g2
ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0xc0, %g2
......@@ -126,8 +126,8 @@ cplus_fptrap_insn_1:
fzero %f34
ldxa [%g3] ASI_DMMU, %g5
add %g6, TI_FPREGS, %g1
cplus_fptrap_insn_2:
sethi %hi(0), %g2
sethi %hi(sparc64_kern_sec_context), %g2
ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS + 0x40, %g2
......@@ -153,8 +153,8 @@ cplus_fptrap_insn_2:
3: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS, %g1
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_3:
sethi %hi(0), %g2
sethi %hi(sparc64_kern_sec_context), %g2
ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
mov 0x40, %g2
......@@ -319,8 +319,8 @@ do_fptrap_after_fsr:
stx %g3, [%g6 + TI_GSR]
mov SECONDARY_CONTEXT, %g3
ldxa [%g3] ASI_DMMU, %g5
cplus_fptrap_insn_4:
sethi %hi(0), %g2
sethi %hi(sparc64_kern_sec_context), %g2
ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2
stxa %g2, [%g3] ASI_DMMU
membar #Sync
add %g6, TI_FPREGS, %g2
......@@ -341,33 +341,6 @@ cplus_fptrap_insn_4:
ba,pt %xcc, etrap
wr %g0, 0, %fprs
cplus_fptrap_1:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.globl cheetah_plus_patch_fpdis
cheetah_plus_patch_fpdis:
/* We configure the dTLB512_0 for 4MB pages and the
* dTLB512_1 for 8K pages when in context zero.
*/
sethi %hi(cplus_fptrap_1), %o0
lduw [%o0 + %lo(cplus_fptrap_1)], %o1
set cplus_fptrap_insn_1, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_2, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_3, %o2
stw %o1, [%o2]
flush %o2
set cplus_fptrap_insn_4, %o2
stw %o1, [%o2]
flush %o2
retl
nop
/* The registers for cross calls will be:
*
* DATA 0: [low 32-bits] Address of function to call, jmp to this
......
arch/sparc64/kernel/etrap.S
View file @ dce32c78
......@@ -68,12 +68,8 @@ etrap_irq:
wrpr %g3, 0, %otherwin
wrpr %g2, 0, %wstate
cplus_etrap_insn_1:
sethi %hi(0), %g3
sllx %g3, 32, %g3
cplus_etrap_insn_2:
sethi %hi(0), %g2
or %g3, %g2, %g3
sethi %hi(sparc64_kern_pri_context), %g2
ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3
stxa %g3, [%l4] ASI_DMMU
flush %l6
wr %g0, ASI_AIUS, %asi
......@@ -215,12 +211,8 @@ scetrap: rdpr %pil, %g2
mov PRIMARY_CONTEXT, %l4
wrpr %g3, 0, %otherwin
wrpr %g2, 0, %wstate
cplus_etrap_insn_3:
sethi %hi(0), %g3
sllx %g3, 32, %g3
cplus_etrap_insn_4:
sethi %hi(0), %g2
or %g3, %g2, %g3
sethi %hi(sparc64_kern_pri_context), %g2
ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3
stxa %g3, [%l4] ASI_DMMU
flush %l6
......@@ -264,38 +256,3 @@ cplus_etrap_insn_4:
#undef TASK_REGOFF
#undef ETRAP_PSTATE1
cplus_einsn_1:
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3
cplus_einsn_2:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.globl cheetah_plus_patch_etrap
cheetah_plus_patch_etrap:
/* We configure the dTLB512_0 for 4MB pages and the
* dTLB512_1 for 8K pages when in context zero.
*/
sethi %hi(cplus_einsn_1), %o0
sethi %hi(cplus_etrap_insn_1), %o2
lduw [%o0 + %lo(cplus_einsn_1)], %o1
or %o2, %lo(cplus_etrap_insn_1), %o2
stw %o1, [%o2]
flush %o2
sethi %hi(cplus_etrap_insn_3), %o2
or %o2, %lo(cplus_etrap_insn_3), %o2
stw %o1, [%o2]
flush %o2
sethi %hi(cplus_einsn_2), %o0
sethi %hi(cplus_etrap_insn_2), %o2
lduw [%o0 + %lo(cplus_einsn_2)], %o1
or %o2, %lo(cplus_etrap_insn_2), %o2
stw %o1, [%o2]
flush %o2
sethi %hi(cplus_etrap_insn_4), %o2
or %o2, %lo(cplus_etrap_insn_4), %o2
stw %o1, [%o2]
flush %o2
retl
nop
arch/sparc64/kernel/head.S
View file @ dce32c78
......@@ -325,23 +325,7 @@ cheetah_tlb_fixup:
1: sethi %hi(tlb_type), %g1
stw %g2, [%g1 + %lo(tlb_type)]
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
ba,pt %xcc, 2f
nop
1: /* Patch context register writes to support nucleus page
* size correctly.
*/
call cheetah_plus_patch_etrap
nop
call cheetah_plus_patch_rtrap
nop
call cheetah_plus_patch_fpdis
nop
call cheetah_plus_patch_winfixup
nop
2: /* Patch copy/page operations to cheetah optimized versions. */
/* Patch copy/page operations to cheetah optimized versions. */
call cheetah_patch_copyops
nop
call cheetah_patch_copy_page
......@@ -484,20 +468,13 @@ spitfire_vpte_base:
call prom_set_trap_table
sethi %hi(sparc64_ttable_tl0), %o0
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
ba,pt %xcc, 2f
nop
1: /* Start using proper page size encodings in ctx register. */
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3
/* Start using proper page size encodings in ctx register. */
sethi %hi(sparc64_kern_pri_context), %g3
ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2
mov PRIMARY_CONTEXT, %g1
sllx %g3, 32, %g3
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
or %g3, %g2, %g3
stxa %g3, [%g1] ASI_DMMU
stxa %g2, [%g1] ASI_DMMU
membar #Sync
2:
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
wrpr %o1, 0, %pstate
......
arch/sparc64/kernel/rtrap.S
View file @ dce32c78
......@@ -256,9 +256,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1
brnz,pn %l3, kern_rtt
mov PRIMARY_CONTEXT, %l7
ldxa [%l7 + %l7] ASI_DMMU, %l0
cplus_rtrap_insn_1:
sethi %hi(0), %l1
sllx %l1, 32, %l1
sethi %hi(sparc64_kern_pri_nuc_bits), %l1
ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
or %l0, %l1, %l0
stxa %l0, [%l7] ASI_DMMU
flush %g6
......@@ -345,21 +344,3 @@ kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5
wr %g0, FPRS_DU, %fprs
ba,pt %xcc, rt_continue
stb %l5, [%g6 + TI_FPDEPTH]
cplus_rinsn_1:
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1
.globl cheetah_plus_patch_rtrap
cheetah_plus_patch_rtrap:
/* We configure the dTLB512_0 for 4MB pages and the
* dTLB512_1 for 8K pages when in context zero.
*/
sethi %hi(cplus_rinsn_1), %o0
sethi %hi(cplus_rtrap_insn_1), %o2
lduw [%o0 + %lo(cplus_rinsn_1)], %o1
or %o2, %lo(cplus_rtrap_insn_1), %o2
stw %o1, [%o2]
flush %o2
retl
nop
arch/sparc64/kernel/setup.c
View file @ dce32c78
......@@ -187,17 +187,13 @@ int prom_callback(long *args)
}
if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) {
unsigned long kernel_pctx = 0;
if (tlb_type == cheetah_plus)
kernel_pctx |= (CTX_CHEETAH_PLUS_NUC |
CTX_CHEETAH_PLUS_CTX0);
extern unsigned long sparc64_kern_pri_context;
/* Spitfire Errata #32 workaround */
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"flush %%g6"
: /* No outputs */
: "r" (kernel_pctx),
: "r" (sparc64_kern_pri_context),
"r" (PRIMARY_CONTEXT),
"i" (ASI_DMMU));
......
arch/sparc64/kernel/trampoline.S
View file @ dce32c78
......@@ -336,20 +336,13 @@ do_unlock:
call init_irqwork_curcpu
nop
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
ba,pt %xcc, 2f
nop
1: /* Start using proper page size encodings in ctx register. */
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3
/* Start using proper page size encodings in ctx register. */
sethi %hi(sparc64_kern_pri_context), %g3
ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2
mov PRIMARY_CONTEXT, %g1
sllx %g3, 32, %g3
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
or %g3, %g2, %g3
stxa %g3, [%g1] ASI_DMMU
stxa %g2, [%g1] ASI_DMMU
membar #Sync
2:
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
wrpr %o1, 0, %pstate
......
arch/sparc64/kernel/winfixup.S
View file @ dce32c78
......@@ -16,23 +16,14 @@
.text
set_pcontext:
cplus_winfixup_insn_1:
sethi %hi(0), %l1
sethi %hi(sparc64_kern_pri_context), %l1
ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1
mov PRIMARY_CONTEXT, %g1
sllx %l1, 32, %l1
cplus_winfixup_insn_2:
sethi %hi(0), %g2
or %l1, %g2, %l1
stxa %l1, [%g1] ASI_DMMU
flush %g6
retl
nop
cplus_wfinsn_1:
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1
cplus_wfinsn_2:
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
.align 32
/* Here are the rules, pay attention.
......@@ -395,23 +386,3 @@ window_dax_from_user_common:
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl cheetah_plus_patch_winfixup
cheetah_plus_patch_winfixup:
sethi %hi(cplus_wfinsn_1), %o0
sethi %hi(cplus_winfixup_insn_1), %o2
lduw [%o0 + %lo(cplus_wfinsn_1)], %o1
or %o2, %lo(cplus_winfixup_insn_1), %o2
stw %o1, [%o2]
flush %o2
sethi %hi(cplus_wfinsn_2), %o0
sethi %hi(cplus_winfixup_insn_2), %o2
lduw [%o0 + %lo(cplus_wfinsn_2)], %o1
or %o2, %lo(cplus_winfixup_insn_2), %o2
stw %o1, [%o2]
flush %o2
retl
nop
arch/sparc64/mm/init.c
View file @ dce32c78
......@@ -133,6 +133,12 @@ extern unsigned int sparc_ramdisk_size;
struct page *mem_map_zero __read_mostly;
unsigned int sparc64_highest_unlocked_tlb_ent __read_mostly;
unsigned long sparc64_kern_pri_context __read_mostly;
unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
unsigned long sparc64_kern_sec_context __read_mostly;
int bigkernel = 0;
/* XXX Tune this... */
......@@ -362,6 +368,7 @@ struct linux_prom_translation {
unsigned long data;
};
static struct linux_prom_translation prom_trans[512] __initdata;
static unsigned int prom_trans_ents __initdata;
extern unsigned long prom_boot_page;
extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle);
......@@ -375,57 +382,7 @@ unsigned long kern_locked_tte_data;
unsigned long prom_pmd_phys __read_mostly;
unsigned int swapper_pgd_zero __read_mostly;
/* Allocate power-of-2 aligned chunks from the end of the
* kernel image. Return physical address.
*/
static inline unsigned long early_alloc_phys(unsigned long size)
{
unsigned long base;
BUILD_BUG_ON(size & (size - 1));
kern_size = (kern_size + (size - 1)) & ~(size - 1);
base = kern_base + kern_size;
kern_size += size;
return base;
}
static inline unsigned long load_phys32(unsigned long pa)
{
unsigned long val;
__asm__ __volatile__("lduwa [%1] %2, %0"
: "=&r" (val)
: "r" (pa), "i" (ASI_PHYS_USE_EC));
return val;
}
static inline unsigned long load_phys64(unsigned long pa)
{
unsigned long val;
__asm__ __volatile__("ldxa [%1] %2, %0"
: "=&r" (val)
: "r" (pa), "i" (ASI_PHYS_USE_EC));
return val;
}
static inline void store_phys32(unsigned long pa, unsigned long val)
{
__asm__ __volatile__("stwa %0, [%1] %2"
: /* no outputs */
: "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC));
}
static inline void store_phys64(unsigned long pa, unsigned long val)
{
__asm__ __volatile__("stxa %0, [%1] %2"
: /* no outputs */
: "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC));
}
static pmd_t *prompmd __read_mostly;
#define BASE_PAGE_SIZE 8192
......@@ -435,34 +392,28 @@ static inline void store_phys64(unsigned long pa, unsigned long val)
*/
unsigned long prom_virt_to_phys(unsigned long promva, int *error)
{
unsigned long pmd_phys = (prom_pmd_phys +
((promva >> 23) & 0x7ff) * sizeof(pmd_t));
unsigned long pte_phys;
pmd_t pmd_ent;
pte_t pte_ent;
pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff);
pte_t *ptep;
unsigned long base;
pmd_val(pmd_ent) = load_phys32(pmd_phys);
if (pmd_none(pmd_ent)) {
if (pmd_none(*pmdp)) {
if (error)
*error = 1;
return 0;
}
pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL;
pte_phys += ((promva >> 13) & 0x3ff) * sizeof(pte_t);
pte_val(pte_ent) = load_phys64(pte_phys);
if (!pte_present(pte_ent)) {
ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff);
if (!pte_present(*ptep)) {
if (error)
*error = 1;
return 0;
}
if (error) {
*error = 0;
return pte_val(pte_ent);
return pte_val(*ptep);
}
base = pte_val(pte_ent) & _PAGE_PADDR;
return (base + (promva & (BASE_PAGE_SIZE - 1)));
base = pte_val(*ptep) & _PAGE_PADDR;
return base + (promva & (BASE_PAGE_SIZE - 1));
}
/* The obp translations are saved based on 8k pagesize, since obp can
......@@ -475,25 +426,20 @@ static void __init build_obp_range(unsigned long start, unsigned long end, unsig
unsigned long vaddr;
for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) {
unsigned long val, pte_phys, pmd_phys;
pmd_t pmd_ent;
int i;
pmd_phys = (prom_pmd_phys +
(((vaddr >> 23) & 0x7ff) * sizeof(pmd_t)));
pmd_val(pmd_ent) = load_phys32(pmd_phys);
if (pmd_none(pmd_ent)) {
pte_phys = early_alloc_phys(BASE_PAGE_SIZE);
for (i = 0; i < BASE_PAGE_SIZE / sizeof(pte_t); i++)
store_phys64(pte_phys+i*sizeof(pte_t),0);
unsigned long val;
pmd_t *pmd;
pte_t *pte;
pmd_val(pmd_ent) = pte_phys >> 11UL;
store_phys32(pmd_phys, pmd_val(pmd_ent));
pmd = prompmd + ((vaddr >> 23) & 0x7ff);
if (pmd_none(*pmd)) {
pte = __alloc_bootmem(BASE_PAGE_SIZE, BASE_PAGE_SIZE,
PAGE_SIZE);
if (!pte)
prom_halt();
memset(pte, 0, BASE_PAGE_SIZE);
pmd_set(pmd, pte);
}
pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL;
pte_phys += (((vaddr >> 13) & 0x3ff) * sizeof(pte_t));
pte = (pte_t *) __pmd_page(*pmd) + ((vaddr >> 13) & 0x3ff);
val = data;
......@@ -501,7 +447,8 @@ static void __init build_obp_range(unsigned long start, unsigned long end, unsig
if (tlb_type == spitfire)
val &= ~0x0003fe0000000000UL;
store_phys64(pte_phys, val | _PAGE_MODIFIED);
set_pte_at(&init_mm, vaddr, pte,
__pte(val | _PAGE_MODIFIED));
data += BASE_PAGE_SIZE;
}
......@@ -514,13 +461,17 @@ static inline int in_obp_range(unsigned long vaddr)
}
#define OBP_PMD_SIZE 2048
static void __init build_obp_pgtable(int prom_trans_ents)
static void __init build_obp_pgtable(void)
{
unsigned long i;
prom_pmd_phys = early_alloc_phys(OBP_PMD_SIZE);
for (i = 0; i < OBP_PMD_SIZE; i += 4)
store_phys32(prom_pmd_phys + i, 0);
prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, PAGE_SIZE);
if (!prompmd)
prom_halt();
memset(prompmd, 0, OBP_PMD_SIZE);
prom_pmd_phys = __pa(prompmd);
for (i = 0; i < prom_trans_ents; i++) {
unsigned long start, end;
......@@ -540,7 +491,7 @@ static void __init build_obp_pgtable(int prom_trans_ents)
/* Read OBP translations property into 'prom_trans[]'.
* Return the number of entries.
*/
static int __init read_obp_translations(void)
static void __init read_obp_translations(void)
{
int n, node;
......@@ -561,8 +512,10 @@ static int __init read_obp_translations(void)
prom_printf("prom_mappings: Couldn't get property.\n");
prom_halt();
}
n = n / sizeof(struct linux_prom_translation);
return n;
prom_trans_ents = n;
}
static void __init remap_kernel(void)
......@@ -582,28 +535,38 @@ static void __init remap_kernel(void)
prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
if (bigkernel) {
prom_dtlb_load(tlb_ent - 1,
tlb_ent -= 1;
prom_dtlb_load(tlb_ent,
tte_data + 0x400000,
tte_vaddr + 0x400000);
prom_itlb_load(tlb_ent - 1,
prom_itlb_load(tlb_ent,
tte_data + 0x400000,
tte_vaddr + 0x400000);
}
sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
if (tlb_type == cheetah_plus) {
sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
CTX_CHEETAH_PLUS_NUC);
sparc64_kern_pri_nuc_bits = CTX_CHEETAH_PLUS_NUC;
sparc64_kern_sec_context = CTX_CHEETAH_PLUS_CTX0;
}
}
static void __init inherit_prom_mappings(void)
{
int n;
n = read_obp_translations();
build_obp_pgtable(n);
static void __init inherit_prom_mappings_pre(void)
{
read_obp_translations();
/* Now fixup OBP's idea about where we really are mapped. */
prom_printf("Remapping the kernel... ");
remap_kernel();
prom_printf("done.\n");
}
static void __init inherit_prom_mappings_post(void)
{
build_obp_pgtable();
register_prom_callbacks();
}
......@@ -788,8 +751,8 @@ void inherit_locked_prom_mappings(int save_p)
}
}
if (tlb_type == spitfire) {
int high = SPITFIRE_HIGHEST_LOCKED_TLBENT - bigkernel;
for (i = 0; i < high; i++) {
int high = sparc64_highest_unlocked_tlb_ent;
for (i = 0; i <= high; i++) {
unsigned long data;
/* Spitfire Errata #32 workaround */
......@@ -877,9 +840,9 @@ void inherit_locked_prom_mappings(int save_p)
}
}
} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
int high = CHEETAH_HIGHEST_LOCKED_TLBENT - bigkernel;
int high = sparc64_highest_unlocked_tlb_ent;
for (i = 0; i < high; i++) {
for (i = 0; i <= high; i++) {
unsigned long data;
data = cheetah_get_ldtlb_data(i);
......@@ -1556,8 +1519,7 @@ void __init paging_init(void)
swapper_pgd_zero = pgd_val(swapper_pg_dir[0]);
/* Inherit non-locked OBP mappings. */
inherit_prom_mappings();
inherit_prom_mappings_pre();
/* Ok, we can use our TLB miss and window trap handlers safely.
* We need to do a quick peek here to see if we are on StarFire
......@@ -1568,15 +1530,23 @@ void __init paging_init(void)
extern void setup_tba(int);
setup_tba(this_is_starfire);
}
inherit_locked_prom_mappings(1);
__flush_tlb_all();
/* Everything from this point forward, until we are done with
* inherit_prom_mappings_post(), must complete successfully
* without calling into the firmware. The firwmare page tables
* have not been built, but we are running on the Linux kernel's
* trap table.
*/
/* Setup bootmem... */
pages_avail = 0;
last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
inherit_prom_mappings_post();
inherit_locked_prom_mappings(1);
#ifdef CONFIG_DEBUG_PAGEALLOC
kernel_physical_mapping_init();
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7