[PATCH] I2C: remove I2C_VERSION and I2C_DATE as they make no sense in the kernel tree.

drivers/i2c/busses/i2c-ali1535.c

@@ -525,7 +525,6 @@ static struct pci_driver ali1535_driver = {
 
 static int __init i2c_ali1535_init(void)
 {
-	printk(KERN_INFO "i2c-ali1535 version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&ali1535_driver);
 }
 

drivers/i2c/busses/i2c-ali15x3.c

@@ -517,7 +517,6 @@ static struct pci_driver ali15x3_driver = {
 
 static int __init i2c_ali15x3_init(void)
 {
-	printk("i2c-ali15x3.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&ali15x3_driver);
 }
 

drivers/i2c/busses/i2c-elektor.c

@@ -77,7 +77,7 @@ static void pcf_isa_setbyte(void *data, int ctl, int val)
 		val |= I2C_PCF_ENI;
 	}
 
-	DEB3(printk(KERN_DEBUG "i2c-elektor.o: Write 0x%X 0x%02X\n", address, val & 255));
+	DEB3(printk(KERN_DEBUG "i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255));
 
 	switch (mmapped) {
 	case 0: /* regular I/O */
@@ -98,7 +98,7 @@ static int pcf_isa_getbyte(void *data, int ctl)
 	int address = ctl ? (base + 1) : base;
 	int val = mmapped ? readb(address) : inb(address);
 
-	DEB3(printk(KERN_DEBUG "i2c-elektor.o: Read 0x%X 0x%02X\n", address, val));
+	DEB3(printk(KERN_DEBUG "i2c-elektor: Read 0x%X 0x%02X\n", address, val));
 
 	return (val);
 }
@@ -143,14 +143,14 @@ static int pcf_isa_init(void)
 	if (!mmapped) {
 		if (!request_region(base, 2, "i2c (isa bus adapter)")) {
 			printk(KERN_ERR
-			       "i2c-elektor.o: requested I/O region (0x%X:2) "
+			       "i2c-elektor: requested I/O region (0x%X:2) "
 			       "is in use.\n", base);
 			return -ENODEV;
 		}
 	}
 	if (irq > 0) {
 		if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", 0) < 0) {
-			printk(KERN_ERR "i2c-elektor.o: Request irq%d failed\n", irq);
+			printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
 			irq = 0;
 		} else
 			enable_irq(irq);
@@ -196,7 +196,7 @@ static int __init i2c_pcfisa_init(void)
 			/* yeap, we've found cypress, let's check config */
 			if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
 				
-				DEB3(printk(KERN_DEBUG "i2c-elektor.o: found cy82c693, config register 0x47 = 0x%02x.\n", config));
+				DEB3(printk(KERN_DEBUG "i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config));
 
 				/* UP2000 board has this register set to 0xe1,
                                    but the most significant bit as seems can be 
@@ -218,7 +218,7 @@ static int __init i2c_pcfisa_init(void)
 					   8.25 MHz (PCI/4) clock
 					   (this can be read from cypress) */
 					clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
-					printk(KERN_INFO "i2c-elektor.o: found API UP2000 like board, will probe PCF8584 later.\n");
+					printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
 				}
 			}
 		}
@@ -227,11 +227,11 @@ static int __init i2c_pcfisa_init(void)
 
 	/* sanity checks for mmapped I/O */
 	if (mmapped && base < 0xc8000) {
-		printk(KERN_ERR "i2c-elektor.o: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+		printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "i2c-elektor.o: i2c pcf8584-isa adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
+	printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
 
 	if (base == 0) {
 		base = DEFAULT_BASE;
@@ -243,7 +243,7 @@ static int __init i2c_pcfisa_init(void)
 	if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
 		goto fail;
 	
-	printk(KERN_ERR "i2c-elektor.o: found device at %#x.\n", base);
+	printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
 
 	return 0;
 

drivers/i2c/busses/i2c-i801.c

@@ -616,7 +616,6 @@ static struct pci_driver i801_driver = {
 
 static int __init i2c_i801_init(void)
 {
-	printk(KERN_INFO "i2c-i801 version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&i801_driver);
 }
 

drivers/i2c/busses/i2c-piix4.c

@@ -473,7 +473,6 @@ static struct pci_driver piix4_driver = {
 
 static int __init i2c_piix4_init(void)
 {
-	printk(KERN_INFO "i2c-piix4 version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&piix4_driver);
 }
 

drivers/i2c/busses/i2c-rpx.c

@@ -78,7 +78,7 @@ static struct i2c_adapter rpx_ops = {
 
 int __init i2c_rpx_init(void)
 {
-	printk("i2c-rpx.o: i2c MPC8xx module version %s (%s)\n", I2C_VERSION, I2C_DATE);
+	printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
 
 	/* reset hardware to sane state */
 	rpx_iic_init(&rpx_data);

drivers/i2c/busses/i2c-sis5595.c

@@ -399,7 +399,6 @@ static struct pci_driver sis5595_driver = {
 
 static int __init i2c_sis5595_init(void)
 {
-	printk(KERN_INFO "i2c-sis5595 version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&sis5595_driver);
 }
 

drivers/i2c/busses/i2c-sis630.c

@@ -474,7 +474,6 @@ static struct pci_driver sis630_driver = {
 
 static int __init i2c_sis630_init(void)
 {
-	printk("i2c-sis630.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&sis630_driver);
 }
 

drivers/i2c/busses/i2c-velleman.c

@@ -120,7 +120,7 @@ static struct i2c_adapter bit_velle_ops = {
 
 static int __init i2c_bitvelle_init(void)
 {
-	printk(KERN_INFO "i2c-velleman.o: i2c Velleman K8000 adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
+	printk(KERN_INFO "i2c-velleman: i2c Velleman K8000 driver\n");
 	if (base==0) {
 		/* probe some values */
 		base=DEFAULT_BASE;
@@ -140,7 +140,7 @@ static int __init i2c_bitvelle_init(void)
 			return -ENODEV;
 		}
 	}
-	printk(KERN_DEBUG "i2c-velleman.o: found device at %#x.\n",base);
+	printk(KERN_DEBUG "i2c-velleman: found device at %#x.\n",base);
 	return 0;
 }
 

drivers/i2c/busses/i2c-via.c

@@ -165,7 +165,6 @@ static struct pci_driver vt586b_driver = {
 
 static int __init i2c_vt586b_init(void)
 {
-	printk(KERN_INFO "i2c-via version %s (%s)\n", I2C_VERSION, I2C_DATE);
 	return pci_module_init(&vt586b_driver);
 }
 

drivers/i2c/i2c-dev.c

@@ -505,8 +505,7 @@ static int __init i2c_dev_init(void)
 {
 	int res;
 
-	printk(KERN_INFO "i2c /dev entries driver module version %s (%s)\n",
-		I2C_VERSION, I2C_DATE);
+	printk(KERN_INFO "i2c /dev entries driver\n");
 
 	if (register_chrdev(I2C_MAJOR,"i2c",&i2cdev_fops)) {
 		printk(KERN_ERR "i2c-dev.o: unable to get major %d for i2c bus\n",

include/linux/i2c.h

@@ -28,9 +28,6 @@
 #ifndef _LINUX_I2C_H
 #define _LINUX_I2C_H
 
-#define I2C_DATE "20021208"
-#define I2C_VERSION "2.7.0"
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/i2c-id.h>