Commit dd3f6983 authored by yangbo lu's avatar yangbo lu Committed by Ulf Hansson

mmc: sdhci-of-esdhc: disable SD clock for clock value 0

SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.
Signed-off-by: default avatarYangbo Lu <yangbo.lu@nxp.com>
Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent cdaba732
......@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
return clock / 256 / 16;
}
static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
{
u32 val;
ktime_t timeout;
val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
if (enable)
val |= ESDHC_CLOCK_SDCLKEN;
else
val &= ~ESDHC_CLOCK_SDCLKEN;
sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
val = ESDHC_CLOCK_STABLE;
while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
if (ktime_after(ktime_get(), timeout)) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
break;
}
udelay(10);
}
}
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
......@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
host->mmc->actual_clock = 0;
if (clock == 0)
if (clock == 0) {
esdhc_clock_enable(host, false);
return;
}
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
if (esdhc->vendor_ver < VENDOR_V_23)
......@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
sdhci_writel(host, ctrl, ESDHC_PROCTL);
}
static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
{
u32 val;
ktime_t timeout;
val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
if (enable)
val |= ESDHC_CLOCK_SDCLKEN;
else
val &= ~ESDHC_CLOCK_SDCLKEN;
sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
val = ESDHC_CLOCK_STABLE;
while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
if (ktime_after(ktime_get(), timeout)) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
break;
}
udelay(10);
}
}
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment