[MIPS] Use -Werror on subdirectories which build cleanly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/common/Makefile

@@ -12,3 +12,5 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 
 obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/cobalt/Makefile

@@ -7,3 +7,5 @@ obj-y := buttons.o irq.o reset.o rtc.o serial.o setup.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/ddb5xxx/common/Makefile

@@ -3,3 +3,5 @@
 #
 
 obj-y	 += nile4.o prom.o rtc_ds1386.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/ddb5xxx/ddb5477/Makefile

@@ -7,3 +7,5 @@ obj-y	 		+= ddb5477-platform.o irq.o irq_5477.o setup.o \
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/dec/Makefile

@@ -8,3 +8,5 @@ obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_TC)		+= tc.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/gt64120/wrppmc/Makefile

@@ -10,3 +10,5 @@
 #
 
 obj-y += irq.o reset.o setup.o time.o pci.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/jazz/Makefile

@@ -3,3 +3,5 @@
 #
 
 obj-y	 	:= irq.o jazzdma.o jazz-platform.o reset.o setup.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/jmr3927/common/Makefile

@@ -3,3 +3,5 @@
 #
 
 obj-y	 += prom.o puts.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/jmr3927/rbhma3100/Makefile

@@ -4,3 +4,5 @@
 
 obj-y	 			+= init.o irq.o setup.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/kernel/Makefile

@@ -71,3 +71,5 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 
 obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/lemote/lm2e/Makefile

@@ -3,5 +3,6 @@
 #
 
 obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
-EXTRA_AFLAGS := $(CFLAGS)
 
+EXTRA_AFLAGS := $(CFLAGS)
+EXTRA_CFLAGS += -Werror

arch/mips/math-emu/Makefile

@@ -9,3 +9,5 @@ obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
 	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mips-boards/atlas/Makefile

@@ -18,3 +18,5 @@
 
 obj-y			:= atlas_int.o atlas_setup.o
 obj-$(CONFIG_KGDB)	+= atlas_gdb.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mips-boards/generic/Makefile

@@ -24,3 +24,5 @@ obj-y				:= reset.o display.o init.o memory.o \
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_KGDB)		+= gdb_hook.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mips-boards/malta/Makefile

@@ -23,3 +23,5 @@ obj-y := malta_int.o malta_platform.o malta_setup.o
 
 obj-$(CONFIG_MTD) += malta_mtd.o
 obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mips-boards/sead/Makefile

@@ -24,3 +24,5 @@
 #
 
 obj-y		:= sead_int.o sead_setup.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mipssim/Makefile

@@ -22,3 +22,5 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
 
 obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
 obj-$(CONFIG_SMP) += sim_smp.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/mm/Makefile

@@ -32,3 +32,5 @@ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
 obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/philips/pnx8550/common/Makefile

@@ -25,3 +25,5 @@
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_KGDB) += gdb_hook.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/qemu/Makefile

@@ -5,3 +5,5 @@
 obj-y		= q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o
 
 obj-$(CONFIG_SMP) += q-smp.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/sgi-ip27/Makefile

@@ -9,3 +9,5 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/sgi-ip32/Makefile

@@ -5,3 +5,5 @@
 
 obj-y	+= ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
 	   crime.o ip32-memory.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/sibyte/bcm1480/Makefile

 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/sibyte/common/Makefile

@@ -3,3 +3,4 @@ obj-y :=
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o
 
 EXTRA_AFLAGS := $(CFLAGS)
+EXTRA_CFLAGS += -Werror

arch/mips/sibyte/sb1250/Makefile

@@ -3,3 +3,5 @@ obj-y := setup.o irq.o time.o
 obj-$(CONFIG_SMP)			+= smp.o
 obj-$(CONFIG_SIBYTE_STANDALONE)		+= prom.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/sni/Makefile

@@ -4,3 +4,5 @@
 
 obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o
 obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/vr41xx/common/Makefile

@@ -3,3 +3,5 @@
 #
 
 obj-y	+= bcu.o cmu.o giu.o icu.o init.o irq.o pmu.o rtc.o siu.o type.o
+
+EXTRA_CFLAGS += -Werror