Commit debcb33a authored by Gabriele Paoloni's avatar Gabriele Paoloni Committed by Kamal Mostafa

PCI: spear: Fix dw_pcie_cfg_read/write() usage

commit fa3b7cba upstream.

The first argument of dw_pcie_cfg_read/write() is a 32-bit aligned address.
The second argument is the byte offset into a 32-bit word, and
dw_pcie_cfg_read/write() only look at the low two bits.

SPEAr13xx used dw_pcie_cfg_read() and dw_pcie_cfg_write() incorrectly: it
passed important address bits in the second argument, where they were
ignored.

Pass the complete 32-bit word address in the first argument and only the
2-bit offset into that word in the second argument.

Without this fix, SPEAr13xx host will never work with few buggy gen1 card
which connects with only gen1 host and also with any endpoint which would
generate a read request of more than 128 bytes.

[bhelgaas: changelog]
Reported-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarPratyush Anand <panand@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
parent ec830c19
......@@ -163,34 +163,36 @@ static int spear13xx_pcie_establish_link(struct pcie_port *pp)
* default value in capability register is 512 bytes. So force
* it to 128 here.
*/
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, &val);
dw_pcie_cfg_read(pp->dbi_base + exp_cap_off + PCI_EXP_DEVCTL,
0, 2, &val);
val &= ~PCI_EXP_DEVCTL_READRQ;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, val);
dw_pcie_cfg_write(pp->dbi_base + exp_cap_off + PCI_EXP_DEVCTL,
0, 2, val);
dw_pcie_cfg_write(pp->dbi_base, PCI_VENDOR_ID, 2, 0x104A);
dw_pcie_cfg_write(pp->dbi_base, PCI_DEVICE_ID, 2, 0xCD80);
dw_pcie_cfg_write(pp->dbi_base + PCI_VENDOR_ID, 0, 2, 0x104A);
dw_pcie_cfg_write(pp->dbi_base + PCI_VENDOR_ID, 2, 2, 0xCD80);
/*
* if is_gen1 is set then handle it, so that some buggy card
* also works
*/
if (spear13xx_pcie->is_gen1) {
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCAP, 4,
&val);
dw_pcie_cfg_read(pp->dbi_base + exp_cap_off + PCI_EXP_LNKCAP,
0, 4, &val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCAP, 4, val);
dw_pcie_cfg_write(pp->dbi_base + exp_cap_off +
PCI_EXP_LNKCAP, 0, 4, val);
}
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCTL2, 4,
&val);
dw_pcie_cfg_read(pp->dbi_base + exp_cap_off + PCI_EXP_LNKCTL2,
0, 2, &val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCTL2, 4, val);
dw_pcie_cfg_write(pp->dbi_base + exp_cap_off +
PCI_EXP_LNKCTL2, 0, 2, val);
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment