Commit df0c8d91 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: phy: Call bus->reset() after releasing PHYs from reset

The API convention makes it that a given MDIO bus reset should be able
to access PHY devices in its reset() callback and perform additional
MDIO accesses in order to bring the bus and PHYs in a working state.

Commit 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.") broke that
contract by first calling bus->reset() and then release all PHYs from
reset using their shared GPIO line, so restore the expected
functionality here.

Fixes: 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6832a333
...@@ -364,9 +364,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) ...@@ -364,9 +364,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
mutex_init(&bus->mdio_lock); mutex_init(&bus->mdio_lock);
if (bus->reset)
bus->reset(bus);
/* de-assert bus level PHY GPIO resets */ /* de-assert bus level PHY GPIO resets */
if (bus->num_reset_gpios > 0) { if (bus->num_reset_gpios > 0) {
bus->reset_gpiod = devm_kcalloc(&bus->dev, bus->reset_gpiod = devm_kcalloc(&bus->dev,
...@@ -396,6 +393,9 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) ...@@ -396,6 +393,9 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
} }
} }
if (bus->reset)
bus->reset(bus);
for (i = 0; i < PHY_MAX_ADDR; i++) { for (i = 0; i < PHY_MAX_ADDR; i++) {
if ((bus->phy_mask & (1 << i)) == 0) { if ((bus->phy_mask & (1 << i)) == 0) {
struct phy_device *phydev; struct phy_device *phydev;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment