ASoC: Intel: bytcr_rt5640: add MCLK support

Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined.
By default always enable the 19.2 MHz PLL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/boards/bytcr_rt5640.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <asm/cpu_device_id.h>
 #include <asm/platform_sst_audio.h>
+#include <linux/clk.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -49,18 +50,104 @@ enum {
 #define BYT_RT5640_SSP2_AIF2     BIT(19) /* default is using AIF1  */
 #define BYT_RT5640_SSP0_AIF1     BIT(20)
 #define BYT_RT5640_SSP0_AIF2     BIT(21)
+#define BYT_RT5640_MCLK_EN	BIT(22)
+#define BYT_RT5640_MCLK_25MHZ	BIT(23)
+
+struct byt_rt5640_private {
+	struct clk *mclk;
+};
 
 static unsigned long byt_rt5640_quirk = BYT_RT5640_DMIC1_MAP |
-					BYT_RT5640_DMIC_EN;
+					BYT_RT5640_DMIC_EN |
+					BYT_RT5640_MCLK_EN;
+
+#define BYT_CODEC_DAI1	"rt5640-aif1"
+#define BYT_CODEC_DAI2	"rt5640-aif2"
+
+static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card)
+{
+	struct snd_soc_pcm_runtime *rtd;
+
+	list_for_each_entry(rtd, &card->rtd_list, list) {
+		if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1,
+			     strlen(BYT_CODEC_DAI1)))
+			return rtd->codec_dai;
+		if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2,
+				strlen(BYT_CODEC_DAI2)))
+			return rtd->codec_dai;
+
+	}
+	return NULL;
+}
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+				  struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct snd_soc_dai *codec_dai;
+	struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	codec_dai = byt_get_codec_dai(card);
+	if (!codec_dai) {
+		dev_err(card->dev,
+			"Codec dai not found; Unable to set platform clock\n");
+		return -EIO;
+	}
+
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+			ret = clk_prepare_enable(priv->mclk);
+			if (ret < 0) {
+				dev_err(card->dev,
+					"could not configure MCLK state");
+				return ret;
+			}
+		}
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
+					     48000 * 512,
+					     SND_SOC_CLOCK_IN);
+	} else {
+		/*
+		 * Set codec clock source to internal clock before
+		 * turning off the platform clock. Codec needs clock
+		 * for Jack detection and button press
+		 */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
+					     0,
+					     SND_SOC_CLOCK_IN);
+		if (!ret) {
+			if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk)
+				clk_disable_unprepare(priv->mclk);
+		}
+	}
+
+	if (ret < 0) {
+		dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
 
 static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Internal Mic", NULL),
 	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+			    platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+			    SND_SOC_DAPM_POST_PMD),
+
 };
 
 static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
+	{"Headphone", NULL, "Platform Clock"},
+	{"Headset Mic", NULL, "Platform Clock"},
+	{"Internal Mic", NULL, "Platform Clock"},
+	{"Speaker", NULL, "Platform Clock"},
+
 	{"Headset Mic", NULL, "MICBIAS1"},
 	{"IN2P", NULL, "Headset Mic"},
 	{"Headphone", NULL, "HPOL"},
@@ -150,21 +237,41 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1,
 				     params_rate(params) * 512,
 				     SND_SOC_CLOCK_IN);
+
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec clock %d\n", ret);
 		return ret;
 	}
 
-	if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
-		(byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
-
-		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
-					params_rate(params) * 32, /* FIXME */
-					params_rate(params) * 512);
+	if (!(byt_rt5640_quirk & BYT_RT5640_MCLK_EN)) {
+		/* use bitclock as PLL input */
+		if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) ||
+			(byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) {
+
+			/* 2x16 bit slots on SSP0 */
+			ret = snd_soc_dai_set_pll(codec_dai, 0,
+						RT5640_PLL1_S_BCLK1,
+						params_rate(params) * 32,
+						params_rate(params) * 512);
+		} else {
+			/* 2x15 bit slots on SSP2 */
+			ret = snd_soc_dai_set_pll(codec_dai, 0,
+						RT5640_PLL1_S_BCLK1,
+						params_rate(params) * 50,
+						params_rate(params) * 512);
+		}
 	} else {
-		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5640_PLL1_S_BCLK1,
-					params_rate(params) * 50,
-					params_rate(params) * 512);
+		if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) {
+			ret = snd_soc_dai_set_pll(codec_dai, 0,
+						RT5640_PLL1_S_MCLK,
+						25000000,
+						params_rate(params) * 512);
+		} else {
+			ret = snd_soc_dai_set_pll(codec_dai, 0,
+						RT5640_PLL1_S_MCLK,
+						19200000,
+						params_rate(params) * 512);
+		}
 	}
 
 	if (ret < 0) {
@@ -188,7 +295,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
 		},
-		.driver_data = (unsigned long *)BYT_RT5640_IN1_MAP,
+		.driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
+						 BYT_RT5640_MCLK_EN),
 	},
 	{
 		.callback = byt_rt5640_quirk_cb,
@@ -199,7 +307,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 		.driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
 						 BYT_RT5640_MONO_SPEAKER |
 						 BYT_RT5640_DIFF_MIC |
-						 BYT_RT5640_SSP0_AIF2
+						 BYT_RT5640_SSP0_AIF2 |
+						 BYT_RT5640_MCLK_EN
 						 ),
 	},
 	{
@@ -209,7 +318,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
 		},
 		.driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP |
-						 BYT_RT5640_DMIC_EN),
+						 BYT_RT5640_DMIC_EN |
+						 BYT_RT5640_MCLK_EN),
 	},
 	{
 		.callback = byt_rt5640_quirk_cb,
@@ -217,7 +327,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
 		},
-		.driver_data = (unsigned long *)BYT_RT5640_IN1_MAP,
+		.driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
+						 BYT_RT5640_MCLK_EN),
 	},
 	{}
 };
@@ -228,13 +339,18 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 	struct snd_soc_codec *codec = runtime->codec;
 	struct snd_soc_card *card = runtime->card;
 	const struct snd_soc_dapm_route *custom_map;
+	struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
 	int num_routes;
 
 	card->dapm.idle_bias_off = true;
 
 	rt5640_sel_asrc_clk_src(codec,
 				RT5640_DA_STEREO_FILTER |
-				RT5640_AD_STEREO_FILTER,
+				RT5640_DA_MONO_L_FILTER	|
+				RT5640_DA_MONO_R_FILTER	|
+				RT5640_AD_STEREO_FILTER	|
+				RT5640_AD_MONO_L_FILTER	|
+				RT5640_AD_MONO_R_FILTER,
 				RT5640_CLK_SEL_ASRC);
 
 	ret = snd_soc_add_card_controls(card, byt_rt5640_controls,
@@ -312,6 +428,30 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
 
+	if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) {
+		/*
+		 * The firmware might enable the clock at
+		 * boot (this information may or may not
+		 * be reflected in the enable clock register).
+		 * To change the rate we must disable the clock
+		 * first to cover these cases. Due to common
+		 * clock framework restrictions that do not allow
+		 * to disable a clock that has not been enabled,
+		 * we need to enable the clock first.
+		 */
+		ret = clk_prepare_enable(priv->mclk);
+		if (!ret)
+			clk_disable_unprepare(priv->mclk);
+
+		if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
+			ret = clk_set_rate(priv->mclk, 25000000);
+		else
+			ret = clk_set_rate(priv->mclk, 19200000);
+
+		if (ret)
+			dev_err(card->dev, "unable to set MCLK rate\n");
+	}
+
 	return ret;
 }
 
@@ -490,6 +630,7 @@ static bool is_valleyview(void)
 	return true;
 }
 
+
 static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 {
 	int ret_val = 0;
@@ -497,10 +638,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	const char *i2c_name = NULL;
 	int i;
 	int dai_index;
+	struct byt_rt5640_private *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
+	if (!priv)
+		return -ENOMEM;
 
 	/* register the soc card */
 	byt_rt5640_card.dev = &pdev->dev;
 	mach = byt_rt5640_card.dev->platform_data;
+	snd_soc_card_set_drvdata(&byt_rt5640_card, priv);
 
 	/* fix index of codec dai */
 	dai_index = MERR_DPCM_COMPR + 1;
@@ -561,6 +708,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 			byt_rt5640_cpu_dai_name;
 	}
 
+	if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) {
+		priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+		if (IS_ERR(priv->mclk)) {
+			dev_err(&pdev->dev,
+				"Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+				PTR_ERR(priv->mclk));
+			return PTR_ERR(priv->mclk);
+		}
+	}
+
 	ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card);
 
 	if (ret_val) {