Merge bk://dtor.bkbits.net/for-2.6.11

into silver.ucw.cz:/home/vojtech/bk/dmitry

drivers/input/keyboard/atkbd.c

@@ -234,6 +234,7 @@ static void atkbd_report_key(struct input_dev *dev, struct pt_regs *regs, int co
 	input_regs(dev, regs);
 	if (value == 3) {
 		input_report_key(dev, code, 1);
+		input_sync(dev);
 		input_report_key(dev, code, 0);
 	} else
 		input_event(dev, EV_KEY, code, value);
@@ -352,6 +353,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 				       "to make it known.\n",
 				       code & 0x80 ? "e0" : "", code & 0x7f);
 			}
+			input_sync(&atkbd->dev);
 			break;
 		case ATKBD_SCR_1:
 			scroll = 1 - atkbd->release * 2;

drivers/input/serio/i8042.c

@@ -458,12 +458,11 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 }
 
 /*
- * i8042_enable_mux_mode checks whether the controller has an active
- * multiplexor and puts the chip into Multiplexed (as opposed to
- * Legacy) mode.
+ * i8042_set_mux_mode checks whether the controller has an active
+ * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
  */
 
-static int i8042_enable_mux_mode(struct i8042_values *values, unsigned char *mux_version)
+static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
 {
 
 	unsigned char param;
@@ -482,11 +481,11 @@ static int i8042_enable_mux_mode(struct i8042_values *values, unsigned char *mux
 	param = 0xf0;
 	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
 		return -1;
-	param = 0x56;
+	param = mode ? 0x56 : 0xf6;
 	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa9)
 		return -1;
-	param = 0xa4;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b)
+	param = mode ? 0xa4 : 0xa5;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a))
 		return -1;
 
 	if (mux_version)
@@ -540,11 +539,11 @@ static int __init i8042_check_mux(struct i8042_values *values)
 {
 	unsigned char mux_version;
 
-	if (i8042_enable_mux_mode(values, &mux_version))
+	if (i8042_set_mux_mode(1, &mux_version))
 		return -1;
 
-	/* Workaround for broken chips which seem to support MUX, but in reality don't. */
-	/* They all report version 10.12 */
+	/* Workaround for interference with USB Legacy emulation */
+	/* that causes a v10.12 MUX to be found. */
 	if (mux_version == 0xAC)
 		return -1;
 
@@ -774,12 +773,21 @@ static int i8042_controller_init(void)
  */
 void i8042_controller_reset(void)
 {
-	if (i8042_reset) {
-		unsigned char param;
+	unsigned char param;
+
+/*
+ * Reset the controller if requested.
+ */
 
+	if (i8042_reset)
 		if (i8042_command(&param, I8042_CMD_CTL_TEST))
 			printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
-	}
+
+/*
+ * Disable MUX mode if present.
+ */
+
+	i8042_set_mux_mode(0, NULL);
 
 /*
  * Restore the original control register setting.
@@ -888,7 +896,7 @@ static int i8042_resume(struct device *dev, u32 level)
 	}
 
 	if (i8042_mux_present)
-		if (i8042_enable_mux_mode(&i8042_aux_values, NULL) ||
+		if (i8042_set_mux_mode(1, NULL) ||
 		    i8042_enable_mux_ports(&i8042_aux_values)) {
 			printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n");
 		}

drivers/usb/input/hid-input.c

@@ -403,11 +403,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 	if (!input)
 		return;
 
+	input_regs(input, regs);
+	input_event(input, EV_MSC, MSC_SCAN, usage->hid);
+
 	if (!usage->type)
 		return;
 
-	input_regs(input, regs);
-
 	if (((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_5) && (usage->hid == 0x00090005))
 		|| ((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_7) && (usage->hid == 0x00090007))) {
 		if (value) hid->quirks |=  HID_QUIRK_2WHEEL_MOUSE_HACK_ON;
@@ -574,13 +575,16 @@ int hidinput_connect(struct hid_device *hid)
 				hidinput->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
 				hidinput->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
 				hidinput->input.dev = &hid->intf->dev;
+
+				set_bit(EV_MSC, hidinput->input.evbit);
+				set_bit(MSC_SCAN, hidinput->input.mscbit);
 			}
 
 			for (i = 0; i < report->maxfield; i++)
 				for (j = 0; j < report->field[i]->maxusage; j++)
 					hidinput_configure_usage(hidinput, report->field[i],
 								 report->field[i]->usage + j);
-
+			
 			if (hid->quirks & HID_QUIRK_MULTI_INPUT) {
 				/* This will leave hidinput NULL, so that it
 				 * allocates another one if we have more inputs on