hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices

Add ADP4000, NCP4200 and NCP4208 to the list of devices supported by the generic
PMBus driver, and add device IDs to enable explicit instantiation.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>

Documentation/hwmon/pmbus

@@ -13,6 +13,13 @@ Supported chips:
     Prefix: 'ltc2978'
     Addresses scanned: -
     Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+  * ON Semiconductor ADP4000, NCP4200, NCP4208
+    Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
+    Addresses scanned: -
+    Datasheets:
+	http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
+	http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
+	http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -

drivers/hwmon/pmbus/Kconfig

@@ -19,8 +19,8 @@ config SENSORS_PMBUS
 	default y
 	help
 	  If you say yes here you get hardware monitoring support for generic
-	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
-	  BMR454, and LTC2978.
+	  PMBus devices, including but not limited to ADP4000, BMR450, BMR451,
+	  BMR453, BMR454, LTC2978, NCP4200, and NCP4208.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called pmbus.

drivers/hwmon/pmbus/pmbus.c

@@ -200,11 +200,14 @@ static int pmbus_remove(struct i2c_client *client)
  * Use driver_data to set the number of pages supported by the chip.
  */
 static const struct i2c_device_id pmbus_id[] = {
+	{"adp4000", 1},
 	{"bmr450", 1},
 	{"bmr451", 1},
 	{"bmr453", 1},
 	{"bmr454", 1},
 	{"ltc2978", 8},
+	{"ncp4200", 1},
+	{"ncp4208", 1},
 	{"pmbus", 0},
 	{}
 };