Skip to content

L
linux
Commit e052860d authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of... 

Merge tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Drop more legacy platform data for omaps for v5.6 merge window

We can now probe devices with ti-sysc interconnect driver and dts
data, and can continue dropping the related platform data and custom
ti,hwmods dts property for various devices.

And related to that, we finally can remove the legacy sdma support in
favor of using the dmaengine driver only. I was planning to send the
sdma changes separately, but that would have produced a pile of
pointless merge conflicts, so I decided it's best to resolve it locally.
After all, the sdma series also ends up removing the related platform
data.

Note that this series is based on omap-for-v5.6/ti-sysc-dt-signed branch
as it depends for dts data being in place.

* tag 'omap-for-v5.6/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits)
  ARM: OMAP2+: Drop legacy platform data for sdma
  ARM: OMAP2+: Drop legacy init for sdma
  dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2
  dmaengine: ti: omap-dma: Allocate channels directly
  dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it
  dmaengine: ti: omap-dma: Configure global priority register directly
  ARM: OMAP5: hwmod-data: remove OMAP5 IOMMU hwmod data
  ARM: OMAP4: hwmod-data: remove OMAP4 IOMMU hwmod data
  ARM: OMAP2+: Drop legacy platform data for omap4 fdif
  ARM: OMAP2+: Drop legacy platform data for omap4 slimbus
  ARM: OMAP2+: Drop legacy platform data for omap5 kbd
  ARM: OMAP2+: Drop legacy platform data for omap4 kbd
  ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex
  ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex
  ARM: OMAP2+: Drop legacy platform data for omap4 hsi
  ARM: OMAP2+: Drop legacy platform data for am4 vpfe
  ARM: OMAP2+: Drop legacy platform data for dra7 ocp2scp
  ARM: OMAP2+: Drop legacy platform data for omap5 ocp2scp
  ARM: OMAP2+: Drop legacy platform data for omap4 ocp2scp
  ARM: OMAP2+: Drop legacy platform data for am4 ocp2scp
  ...

Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-4Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 785ca50f 9fc85a71
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 312 additions and 4819 deletions
arch/arm/boot/dts/am33xx-l4.dtsi
View file @ e052860d
......@@ -225,7 +225,6 @@ i2c0: i2c@0 {
target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "adc_tsc";
reg = <0xd000 0x4>,
<0xd010 0x4>;
reg-names = "rev", "sysc";
......@@ -1009,7 +1008,6 @@ i2c1: i2c@0 {
target-module@30000 { /* 0x48030000, ap 77 08.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi0";
reg = <0x30000 0x4>,
<0x30110 0x4>,
<0x30114 0x4>;
......@@ -1134,7 +1132,6 @@ timer2: timer@0 {
target-module@42000 { /* 0x48042000, ap 24 1c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer3";
reg = <0x42000 0x4>,
<0x42010 0x4>,
<0x42014 0x4>;
......@@ -1160,7 +1157,6 @@ timer3: timer@0 {
target-module@44000 { /* 0x48044000, ap 26 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer4";
reg = <0x44000 0x4>,
<0x44010 0x4>,
<0x44014 0x4>;
......@@ -1187,7 +1183,6 @@ timer4: timer@0 {
target-module@46000 { /* 0x48046000, ap 28 28.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer5";
reg = <0x46000 0x4>,
<0x46010 0x4>,
<0x46014 0x4>;
......@@ -1214,7 +1209,6 @@ timer5: timer@0 {
target-module@48000 { /* 0x48048000, ap 30 22.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer6";
reg = <0x48000 0x4>,
<0x48010 0x4>,
<0x48014 0x4>;
......@@ -1241,7 +1235,6 @@ timer6: timer@0 {
target-module@4a000 { /* 0x4804a000, ap 85 60.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer7";
reg = <0x4a000 0x4>,
<0x4a010 0x4>,
<0x4a014 0x4>;
......@@ -1344,7 +1337,6 @@ mmc1: mmc@0 {
target-module@80000 { /* 0x48080000, ap 38 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "elm";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
......@@ -1412,7 +1404,6 @@ mbox_wkupm3: wkup_m3 {
target-module@ca000 { /* 0x480ca000, ap 91 40.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spinlock";
reg = <0xca000 0x4>,
<0xca010 0x4>,
<0xca014 0x4>;
......@@ -1533,7 +1524,6 @@ i2c2: i2c@0 {
target-module@a0000 { /* 0x481a0000, ap 79 24.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi1";
reg = <0xa0000 0x4>,
<0xa0110 0x4>,
<0xa0114 0x4>;
......@@ -1749,7 +1739,6 @@ target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
<&dcan0_fck>;
......@@ -1773,7 +1762,6 @@ target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
<&dcan1_fck>;
......@@ -1863,7 +1851,6 @@ segment@300000 { /* 0x48300000 */
target-module@0 { /* 0x48300000, ap 66 48.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss0";
reg = <0x0 0x4>,
<0x4 0x4>;
reg-names = "rev", "sysc";
......@@ -1916,7 +1903,6 @@ ehrpwm0: pwm@200 {
target-module@2000 { /* 0x48302000, ap 68 52.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss1";
reg = <0x2000 0x4>,
<0x2004 0x4>;
reg-names = "rev", "sysc";
......@@ -1969,7 +1955,6 @@ ehrpwm1: pwm@200 {
target-module@4000 { /* 0x48304000, ap 70 44.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss2";
reg = <0x4000 0x4>,
<0x4004 0x4>;
reg-names = "rev", "sysc";
......@@ -2022,7 +2007,6 @@ ehrpwm2: pwm@200 {
target-module@e000 { /* 0x4830e000, ap 72 4a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "lcdc";
reg = <0xe000 0x4>,
<0xe054 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/am33xx.dtsi
View file @ e052860d
......@@ -441,7 +441,6 @@ gpmc: gpmc@50000000 {
sham_target: target-module@53100000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
ti,hwmods = "sham";
reg = <0x53100100 0x4>,
<0x53100110 0x4>,
<0x53100114 0x4>;
......@@ -470,7 +469,6 @@ sham: sham@0 {
aes_target: target-module@53500000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "aes";
reg = <0x53500080 0x4>,
<0x53500084 0x4>,
<0x53500088 0x4>;
......
arch/arm/boot/dts/am4372.dtsi
View file @ e052860d
......@@ -258,7 +258,6 @@ mmc3: mmc@0 {
sham_target: target-module@53100000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
ti,hwmods = "sham";
reg = <0x53100100 0x4>,
<0x53100110 0x4>,
<0x53100114 0x4>;
......@@ -287,7 +286,6 @@ sham: sham@0 {
aes_target: target-module@53501000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "aes";
reg = <0x53501080 0x4>,
<0x53501084 0x4>,
<0x53501088 0x4>;
......@@ -318,7 +316,6 @@ aes: aes@0 {
des_target: target-module@53701000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "des";
reg = <0x53701030 0x4>,
<0x53701034 0x4>,
<0x53701038 0x4>;
......@@ -369,7 +366,6 @@ gpmc: gpmc@50000000 {
target-module@47900000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "qspi";
reg = <0x47900000 0x4>,
<0x47900010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/am437x-l4.dtsi
View file @ e052860d
......@@ -225,7 +225,6 @@ i2c0: i2c@0 {
target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "adc_tsc";
reg = <0xd000 0x4>,
<0xd010 0x4>;
reg-names = "rev", "sysc";
......@@ -763,7 +762,6 @@ i2c1: i2c@0 {
target-module@30000 { /* 0x48030000, ap 65 08.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi0";
reg = <0x30000 0x4>,
<0x30110 0x4>,
<0x30114 0x4>;
......@@ -900,7 +898,6 @@ timer2: timer@0 {
target-module@42000 { /* 0x48042000, ap 20 24.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer3";
reg = <0x42000 0x4>,
<0x42010 0x4>,
<0x42014 0x4>;
......@@ -927,7 +924,6 @@ timer3: timer@0 {
target-module@44000 { /* 0x48044000, ap 22 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer4";
reg = <0x44000 0x4>,
<0x44010 0x4>,
<0x44014 0x4>;
......@@ -955,7 +951,6 @@ timer4: timer@0 {
target-module@46000 { /* 0x48046000, ap 24 28.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer5";
reg = <0x46000 0x4>,
<0x46010 0x4>,
<0x46014 0x4>;
......@@ -983,7 +978,6 @@ timer5: timer@0 {
target-module@48000 { /* 0x48048000, ap 26 1a.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer6";
reg = <0x48000 0x4>,
<0x48010 0x4>,
<0x48014 0x4>;
......@@ -1011,7 +1005,6 @@ timer6: timer@0 {
target-module@4a000 { /* 0x4804a000, ap 71 48.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer7";
reg = <0x4a000 0x4>,
<0x4a010 0x4>,
<0x4a014 0x4>;
......@@ -1107,7 +1100,6 @@ mmc1: mmc@0 {
target-module@80000 { /* 0x48080000, ap 32 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "elm";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
......@@ -1169,7 +1161,6 @@ mbox_wkupm3: wkup_m3 {
target-module@ca000 { /* 0x480ca000, ap 77 38.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spinlock";
reg = <0xca000 0x4>,
<0xca010 0x4>,
<0xca014 0x4>;
......@@ -1282,7 +1273,6 @@ i2c2: i2c@0 {
target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi1";
reg = <0xa0000 0x4>,
<0xa0110 0x4>,
<0xa0114 0x4>;
......@@ -1313,7 +1303,6 @@ spi1: spi@0 {
target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi2";
reg = <0xa2000 0x4>,
<0xa2110 0x4>,
<0xa2114 0x4>;
......@@ -1344,7 +1333,6 @@ spi2: spi@0 {
target-module@a4000 { /* 0x481a4000, ap 92 62.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi3";
reg = <0xa4000 0x4>,
<0xa4110 0x4>,
<0xa4114 0x4>;
......@@ -1527,7 +1515,6 @@ gpio3: gpio@0 {
target-module@c1000 { /* 0x481c1000, ap 94 68.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer8";
reg = <0xc1000 0x4>,
<0xc1010 0x4>,
<0xc1014 0x4>;
......@@ -1556,7 +1543,6 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
clock-names = "fck";
......@@ -1577,7 +1563,6 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
clock-names = "fck";
......@@ -1695,7 +1680,6 @@ segment@300000 { /* 0x48300000 */
target-module@0 { /* 0x48300000, ap 56 40.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss0";
reg = <0x0 0x4>,
<0x4 0x4>;
reg-names = "rev", "sysc";
......@@ -1748,7 +1732,6 @@ ehrpwm0: pwm@200 {
target-module@2000 { /* 0x48302000, ap 58 4a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss1";
reg = <0x2000 0x4>,
<0x2004 0x4>;
reg-names = "rev", "sysc";
......@@ -1801,7 +1784,6 @@ ehrpwm1: pwm@200 {
target-module@4000 { /* 0x48304000, ap 60 44.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss2";
reg = <0x4000 0x4>,
<0x4004 0x4>;
reg-names = "rev", "sysc";
......@@ -1854,7 +1836,6 @@ ehrpwm2: pwm@200 {
target-module@6000 { /* 0x48306000, ap 96 58.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss3";
reg = <0x6000 0x4>,
<0x6004 0x4>;
reg-names = "rev", "sysc";
......@@ -1896,7 +1877,6 @@ ehrpwm3: pwm@200 {
target-module@8000 { /* 0x48308000, ap 98 54.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss4";
reg = <0x8000 0x4>,
<0x8004 0x4>;
reg-names = "rev", "sysc";
......@@ -1938,7 +1918,6 @@ ehrpwm4: pwm@48308200 {
target-module@a000 { /* 0x4830a000, ap 100 60.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss5";
reg = <0xa000 0x4>,
<0xa004 0x4>;
reg-names = "rev", "sysc";
......@@ -2086,7 +2065,6 @@ gpio5: gpio@0 {
target-module@26000 { /* 0x48326000, ap 86 66.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "vpfe0";
reg = <0x26000 0x4>,
<0x26104 0x4>;
reg-names = "rev", "sysc";
......@@ -2113,7 +2091,6 @@ vpfe0: vpfe@0 {
target-module@28000 { /* 0x48328000, ap 75 0e.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "vpfe1";
reg = <0x28000 0x4>,
<0x28104 0x4>;
reg-names = "rev", "sysc";
......@@ -2162,7 +2139,6 @@ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */
target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer9";
reg = <0x3d000 0x4>,
<0x3d010 0x4>,
<0x3d014 0x4>;
......@@ -2189,7 +2165,6 @@ timer9: timer@0 {
target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer10";
reg = <0x3f000 0x4>,
<0x3f010 0x4>,
<0x3f014 0x4>;
......@@ -2216,7 +2191,6 @@ timer10: timer@0 {
target-module@41000 { /* 0x48341000, ap 106 76.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer11";
reg = <0x41000 0x4>,
<0x41010 0x4>,
<0x41014 0x4>;
......@@ -2243,7 +2217,6 @@ timer11: timer@0 {
target-module@45000 { /* 0x48345000, ap 108 6a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spi4";
reg = <0x45000 0x4>,
<0x45110 0x4>,
<0x45114 0x4>;
......@@ -2358,7 +2331,6 @@ usb1: usb@10000 {
target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "ocp2scp0";
reg = <0xa8000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
......@@ -2440,7 +2412,6 @@ usb2: usb@10000 {
target-module@e8000 { /* 0x483e8000, ap 129 78.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "ocp2scp1";
reg = <0xe8000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
......
arch/arm/boot/dts/dra7-l4.dtsi
View file @ e052860d
......@@ -186,7 +186,6 @@ cm_core_clockdomains: clockdomains {
target-module@56000 { /* 0x4a056000, ap 9 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
......@@ -234,7 +233,6 @@ target-module@5e000 { /* 0x4a05e000, ap 11 1a.0 */
target-module@80000 { /* 0x4a080000, ap 13 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "ocp2scp1";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
......@@ -302,7 +300,6 @@ usb3_phy1: phy@4400 {
target-module@90000 { /* 0x4a090000, ap 59 42.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "ocp2scp3";
reg = <0x90000 0x4>,
<0x90010 0x4>,
<0x90014 0x4>;
......@@ -394,7 +391,6 @@ target-module@a0000 { /* 0x4a0a0000, ap 15 40.0 */
target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
ti,hwmods = "smartreflex_mpu";
reg = <0xd9038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
......@@ -414,7 +410,6 @@ target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */
target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
ti,hwmods = "smartreflex_core";
reg = <0xdd038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
......@@ -471,7 +466,6 @@ mailbox1: mailbox@0 {
target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spinlock";
reg = <0xf6000 0x4>,
<0xf6010 0x4>,
<0xf6014 0x4>;
......@@ -1233,7 +1227,6 @@ timer4: timer@0 {
target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
......@@ -1748,7 +1741,6 @@ i2c2: i2c@0 {
target-module@78000 { /* 0x48078000, ap 39 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "elm";
reg = <0x78000 0x4>,
<0x78010 0x4>,
<0x78014 0x4>;
......@@ -1842,7 +1834,6 @@ i2c5: i2c@0 {
target-module@86000 { /* 0x48086000, ap 41 5e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>;
reg-names = "rev", "sysc";
......@@ -1870,7 +1861,6 @@ timer10: timer@0 {
target-module@88000 { /* 0x48088000, ap 43 66.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
......@@ -2046,7 +2036,6 @@ target-module@a4000 { /* 0x480a4000, ap 57 42.0 */
des_target: target-module@a5000 { /* 0x480a5000 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "des";
reg = <0xa5030 0x4>,
<0xa5034 0x4>,
<0xa5038 0x4>;
......@@ -2522,7 +2511,6 @@ atl: atl@0 {
target-module@3e000 { /* 0x4843e000, ap 25 30.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss0";
reg = <0x3e000 0x4>,
<0x3e004 0x4>;
reg-names = "rev", "sysc";
......@@ -2569,7 +2557,6 @@ ehrpwm0: pwm@200 {
target-module@40000 { /* 0x48440000, ap 27 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss1";
reg = <0x40000 0x4>,
<0x40004 0x4>;
reg-names = "rev", "sysc";
......@@ -2616,7 +2603,6 @@ ehrpwm1: pwm@200 {
target-module@42000 { /* 0x48442000, ap 29 20.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "epwmss2";
reg = <0x42000 0x4>,
<0x42004 0x4>;
reg-names = "rev", "sysc";
......@@ -3358,7 +3344,6 @@ target-module@1e000 { /* 0x4881e000, ap 93 2c.0 */
target-module@20000 { /* 0x48820000, ap 5 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer5";
reg = <0x20000 0x4>,
<0x20010 0x4>;
reg-names = "rev", "sysc";
......@@ -3386,7 +3371,6 @@ timer5: timer@0 {
target-module@22000 { /* 0x48822000, ap 7 24.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer6";
reg = <0x22000 0x4>,
<0x22010 0x4>;
reg-names = "rev", "sysc";
......@@ -3414,7 +3398,6 @@ timer6: timer@0 {
target-module@24000 { /* 0x48824000, ap 9 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer7";
reg = <0x24000 0x4>,
<0x24010 0x4>;
reg-names = "rev", "sysc";
......@@ -3442,7 +3425,6 @@ timer7: timer@0 {
target-module@26000 { /* 0x48826000, ap 11 0c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer8";
reg = <0x26000 0x4>,
<0x26010 0x4>;
reg-names = "rev", "sysc";
......@@ -3470,7 +3452,6 @@ timer8: timer@0 {
target-module@28000 { /* 0x48828000, ap 13 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer13";
reg = <0x28000 0x4>,
<0x28010 0x4>;
reg-names = "rev", "sysc";
......@@ -3498,7 +3479,6 @@ timer13: timer@0 {
target-module@2a000 { /* 0x4882a000, ap 15 10.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer14";
reg = <0x2a000 0x4>,
<0x2a010 0x4>;
reg-names = "rev", "sysc";
......@@ -3526,7 +3506,6 @@ timer14: timer@0 {
target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer15";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
reg-names = "rev", "sysc";
......@@ -3554,7 +3533,6 @@ timer15: timer@0 {
target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer16";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
......@@ -4454,7 +4432,6 @@ segment@20000 { /* 0x4ae20000 */
target-module@0 { /* 0x4ae20000, ap 19 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer12";
reg = <0x0 0x4>,
<0x10 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/dra7.dtsi
View file @ e052860d
......@@ -730,7 +730,6 @@ hdmi: encoder@58060000 {
aes1_target: target-module@4b500000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "aes1";
reg = <0x4b500080 0x4>,
<0x4b500084 0x4>,
<0x4b500088 0x4>;
......@@ -762,7 +761,6 @@ aes1: aes@0 {
aes2_target: target-module@4b700000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "aes2";
reg = <0x4b700080 0x4>,
<0x4b700084 0x4>,
<0x4b700088 0x4>;
......@@ -794,7 +792,6 @@ aes2: aes@0 {
sham_target: target-module@4b101000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
ti,hwmods = "sham";
reg = <0x4b101100 0x4>,
<0x4b101110 0x4>,
<0x4b101114 0x4>;
......
arch/arm/boot/dts/omap2.dtsi
View file @ e052860d
......@@ -82,7 +82,6 @@ intc: interrupt-controller@1 {
target-module@48056000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma";
reg = <0x48056000 0x4>,
<0x4805602c 0x4>,
<0x48056028 0x4>;
......
arch/arm/boot/dts/omap3.dtsi
View file @ e052860d
......@@ -208,7 +208,6 @@ intc: interrupt-controller@48200000 {
target-module@48056000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma";
reg = <0x48056000 0x4>,
<0x4805602c 0x4>,
<0x48056028 0x4>;
......
arch/arm/boot/dts/omap4-l4-abe.dtsi
View file @ e052860d
......@@ -219,7 +219,6 @@ target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "dmic";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
......@@ -279,7 +278,6 @@ wdt3: wdt@0 {
mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcpdm";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
......@@ -314,7 +312,6 @@ mcpdm: mcpdm@0 {
target-module@38000 { /* 0x40138000, ap 18 12.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer5";
reg = <0x38000 0x4>,
<0x38010 0x4>;
reg-names = "rev", "sysc";
......@@ -345,7 +342,6 @@ timer5: timer@0 {
target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer6";
reg = <0x3a000 0x4>,
<0x3a010 0x4>;
reg-names = "rev", "sysc";
......@@ -376,7 +372,6 @@ timer6: timer@0 {
target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer7";
reg = <0x3c000 0x4>,
<0x3c010 0x4>;
reg-names = "rev", "sysc";
......@@ -407,7 +402,6 @@ timer7: timer@0 {
target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer8";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
......@@ -466,7 +460,6 @@ target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */
target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "aess";
reg = <0xf1000 0x4>,
<0xf1010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/omap4-l4.dtsi
View file @ e052860d
......@@ -136,7 +136,6 @@ cm2_clockdomains: clockdomains {
target-module@56000 { /* 0x4a056000, ap 7 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
......@@ -174,7 +173,6 @@ sdma: dma-controller@0 {
target-module@58000 { /* 0x4a058000, ap 10 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "hsi";
reg = <0x58000 0x4>,
<0x58010 0x4>,
<0x58014 0x4>;
......@@ -425,7 +423,6 @@ usb_otg_hs: usb_otg_hs@0 {
target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "ocp2scp_usb_phy";
reg = <0x2d000 0x4>,
<0x2d010 0x4>,
<0x2d014 0x4>;
......@@ -504,7 +501,6 @@ target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */
target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
ti,hwmods = "smartreflex_mpu";
reg = <0x59038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
......@@ -528,7 +524,6 @@ smartreflex_mpu: smartreflex@0 {
target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
ti,hwmods = "smartreflex_iva";
reg = <0x5b038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
......@@ -552,7 +547,6 @@ smartreflex_iva: smartreflex@0 {
target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
ti,hwmods = "smartreflex_core";
reg = <0x5d038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
......@@ -618,7 +612,6 @@ mbox_dsp: mbox_dsp {
target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spinlock";
reg = <0x76000 0x4>,
<0x76010 0x4>,
<0x76014 0x4>;
......@@ -726,7 +719,6 @@ target-module@8000 { /* 0x4a108000, ap 63 62.0 */
target-module@a000 { /* 0x4a10a000, ap 65 50.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "fdif";
reg = <0xa000 0x4>,
<0xa010 0x4>;
reg-names = "rev", "sysc";
......@@ -1182,7 +1174,6 @@ timer1: timer@0 {
target-module@c000 { /* 0x4a31c000, ap 11 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "kbd";
reg = <0xc000 0x4>,
<0xc010 0x4>,
<0xc014 0x4>;
......@@ -1427,7 +1418,6 @@ uart3: serial@0 {
target-module@32000 { /* 0x48032000, ap 5 02.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>,
<0x32014 0x4>;
......@@ -1459,7 +1449,6 @@ timer2: timer@0 {
target-module@34000 { /* 0x48034000, ap 7 04.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
......@@ -1487,7 +1476,6 @@ timer3: timer@0 {
target-module@36000 { /* 0x48036000, ap 9 0e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
......@@ -1515,7 +1503,6 @@ timer4: timer@0 {
target-module@3e000 { /* 0x4803e000, ap 11 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
......@@ -1897,7 +1884,6 @@ i2c2: i2c@0 {
target-module@76000 { /* 0x48076000, ap 39 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "slimbus2";
reg = <0x76000 0x4>,
<0x76010 0x4>;
reg-names = "rev", "sysc";
......@@ -1918,7 +1904,6 @@ target-module@76000 { /* 0x48076000, ap 39 38.0 */
target-module@78000 { /* 0x48078000, ap 41 1a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "elm";
reg = <0x78000 0x4>,
<0x78010 0x4>,
<0x78014 0x4>;
......@@ -1947,7 +1932,6 @@ elm: elm@0 {
target-module@86000 { /* 0x48086000, ap 43 24.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>,
<0x86014 0x4>;
......@@ -1980,7 +1964,6 @@ timer10: timer@0 {
target-module@88000 { /* 0x48088000, ap 45 2e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/omap4.dtsi
View file @ e052860d
......@@ -229,7 +229,6 @@ mmu_ipu: mmu@0 {
target-module@4012c000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "slimbus1";
reg = <0x4012c000 0x4>,
<0x4012c010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/omap5-l4-abe.dtsi
View file @ e052860d
......@@ -203,7 +203,6 @@ target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "dmic";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
......@@ -244,7 +243,6 @@ target-module@30000 { /* 0x40130000, ap 14 0e.0 */
mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "mcpdm";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
......@@ -279,7 +277,6 @@ mcpdm: mcpdm@0 {
target-module@38000 { /* 0x40138000, ap 18 12.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer5";
reg = <0x38000 0x4>,
<0x38010 0x4>;
reg-names = "rev", "sysc";
......@@ -311,7 +308,6 @@ timer5: timer@0 {
target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer6";
reg = <0x3a000 0x4>,
<0x3a010 0x4>;
reg-names = "rev", "sysc";
......@@ -343,7 +339,6 @@ timer6: timer@0 {
target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer7";
reg = <0x3c000 0x4>,
<0x3c010 0x4>;
reg-names = "rev", "sysc";
......@@ -374,7 +369,6 @@ timer7: timer@0 {
target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer8";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/omap5-l4.dtsi
View file @ e052860d
......@@ -213,7 +213,6 @@ dwc3: dwc3@10000 {
target-module@56000 { /* 0x4a056000, ap 7 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
......@@ -435,7 +434,6 @@ segment@80000 { /* 0x4a080000 */
target-module@0 { /* 0x4a080000, ap 83 28.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "ocp2scp1";
reg = <0x0 0x4>,
<0x10 0x4>,
<0x14 0x4>;
......@@ -493,7 +491,6 @@ usb3_phy: usb3phy@4400 {
target-module@10000 { /* 0x4a090000, ap 89 36.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "ocp2scp3";
reg = <0x10000 0x4>,
<0x10010 0x4>,
<0x10014 0x4>;
......@@ -632,7 +629,6 @@ mbox_dsp: mbox_dsp {
target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "spinlock";
reg = <0x76000 0x4>,
<0x76010 0x4>,
<0x76014 0x4>;
......@@ -1066,7 +1062,6 @@ uart3: serial@0 {
target-module@32000 { /* 0x48032000, ap 5 3e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
......@@ -1094,7 +1089,6 @@ timer2: timer@0 {
target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
......@@ -1122,7 +1116,6 @@ timer3: timer@0 {
target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
......@@ -1150,7 +1143,6 @@ timer4: timer@0 {
target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
......@@ -1718,7 +1710,6 @@ i2c5: i2c@0 {
target-module@86000 { /* 0x48086000, ap 41 5e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>;
reg-names = "rev", "sysc";
......@@ -1747,7 +1738,6 @@ timer10: timer@0 {
target-module@88000 { /* 0x48088000, ap 43 66.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
......@@ -2363,7 +2353,6 @@ timer1: timer@0 {
target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "kbd";
reg = <0xc000 0x4>,
<0xc010 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/mach-omap2/common.h
View file @ e052860d
......@@ -345,9 +345,12 @@ static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
}
#endif
struct omap_system_dma_plat_info;
void pdata_quirks_init(const struct of_device_id *);
void omap_auxdata_legacy_init(struct device *dev);
void omap_pcs_legacy_init(int irq, void (*rearm)(void));
extern struct omap_system_dma_plat_info dma_plat_info;
struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
......
arch/arm/mach-omap2/dma.c
View file @ e052860d
......@@ -30,10 +30,6 @@
#include <linux/omap-dma.h>
#include "soc.h"
#include "omap_hwmod.h"
#include "omap_device.h"
static enum omap_reg_offsets dma_common_ch_end;
static const struct omap_dma_reg reg_map[] = {
[REVISION] = { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
......@@ -81,42 +77,6 @@ static const struct omap_dma_reg reg_map[] = {
[CCDN] = { 0x00d8, 0x60, OMAP_DMA_REG_32BIT },
};
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
void __iomem *addr = dma_base;
addr += reg_map[reg].offset;
addr += reg_map[reg].stride * lch;
writel_relaxed(val, addr);
}
static inline u32 dma_read(int reg, int lch)
{
void __iomem *addr = dma_base;
addr += reg_map[reg].offset;
addr += reg_map[reg].stride * lch;
return readl_relaxed(addr);
}
static void omap2_clear_dma(int lch)
{
int i;
for (i = CSDP; i <= dma_common_ch_end; i += 1)
dma_write(0, i, lch);
}
static void omap2_show_dma_caps(void)
{
u8 revision = dma_read(REVISION, 0) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
revision >> 4, revision & 0xf);
}
static unsigned configure_dma_errata(void)
{
unsigned errata = 0;
......@@ -211,82 +171,35 @@ static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
{ "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
};
static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.reg_map = reg_map,
.channel_stride = 0x60,
.show_dma_caps = omap2_show_dma_caps,
.clear_dma = omap2_clear_dma,
.dma_write = dma_write,
.dma_read = dma_read,
static struct omap_dma_dev_attr dma_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32,
.lch_count = 32,
};
static struct platform_device_info omap_dma_dev_info __initdata = {
.name = "omap-dma-engine",
.id = -1,
.dma_mask = DMA_BIT_MASK(32),
struct omap_system_dma_plat_info dma_plat_info = {
.reg_map = reg_map,
.channel_stride = 0x60,
.dma_attr = &dma_attr,
};
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
static int __init omap2_system_dma_init(void)
{
struct platform_device *pdev;
struct omap_system_dma_plat_info p;
struct omap_dma_dev_attr *d;
struct resource *mem;
char *name = "omap_dma_system";
p = dma_plat_info;
p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
p.errata = configure_dma_errata();
dma_plat_info.errata = configure_dma_errata();
if (soc_is_omap24xx()) {
/* DMA slave map for drivers not yet converted to DT */
p.slave_map = omap24xx_sdma_dt_map;
p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
dma_plat_info.slave_map = omap24xx_sdma_dt_map;
dma_plat_info.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
}
pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
return PTR_ERR(pdev);
}
omap_dma_dev_info.res = pdev->resource;
omap_dma_dev_info.num_res = pdev->num_resources;
if (!soc_is_omap242x())
dma_attr.dev_caps |= IS_RW_PRIORITY;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
d = oh->dev_attr;
if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
d->dev_caps |= HS_CHANNELS_RESERVED;
if (platform_get_irq_byname(pdev, "0") < 0)
d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
else
dma_common_ch_end = CCFN;
if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
return 0;
}
static int __init omap2_system_dma_init(void)
{
return omap_hwmod_for_each_by_class("dma",
omap2_system_dma_init_dev, NULL);
}
omap_arch_initcall(omap2_system_dma_init);
arch/arm/mach-omap2/omap_device.c
View file @ e052860d
......@@ -373,176 +373,6 @@ void omap_device_delete(struct omap_device *od)
kfree(od);
}
/**
* omap_device_copy_resources - Add legacy IO and IRQ resources
* @oh: interconnect target module
* @pdev: platform device to copy resources to
*
* We still have legacy DMA and smartreflex needing resources.
* Let's populate what they need until we can eventually just
* remove this function. Note that there should be no need to
* call this from omap_device_build_from_dt(), nor should there
* be any need to call it for other devices.
*/
static int
omap_device_copy_resources(struct omap_hwmod *oh,
struct platform_device *pdev)
{
struct device_node *np, *child;
struct property *prop;
struct resource *res;
const char *name;
int error, irq = 0;
if (!oh || !oh->od || !oh->od->pdev)
return -EINVAL;
np = oh->od->pdev->dev.of_node;
if (!np) {
error = -ENODEV;
goto error;
}
res = kcalloc(2, sizeof(*res), GFP_KERNEL);
if (!res)
return -ENOMEM;
/* Do we have a dts range for the interconnect target module? */
error = omap_hwmod_parse_module_range(oh, np, res);
/* No ranges, rely on device reg entry */
if (error)
error = of_address_to_resource(np, 0, res);
if (error)
goto free;
/* SmartReflex needs first IO resource name to be "mpu" */
res[0].name = "mpu";
/*
* We may have a configured "ti,sysc" interconnect target with a
* dts child with the interrupt. If so use the first child's
* first interrupt for "ti-hwmods" legacy support.
*/
of_property_for_each_string(np, "compatible", prop, name)
if (!strncmp("ti,sysc-", name, 8))
break;
child = of_get_next_available_child(np, NULL);
if (name)
irq = irq_of_parse_and_map(child, 0);
if (!irq)
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
error = -EINVAL;
goto free;
}
/* Legacy DMA code needs interrupt name to be "0" */
res[1].start = irq;
res[1].end = irq;
res[1].flags = IORESOURCE_IRQ;
res[1].name = "0";
error = platform_device_add_resources(pdev, res, 2);
free:
kfree(res);
error:
WARN(error, "%s: %s device %s failed: %i\n",
__func__, oh->name, dev_name(&pdev->dev),
error);
return error;
}
/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
*
* Convenience function for building and registering a single
* omap_device record, which in turn builds and registers a
* platform_device record. See omap_device_build_ss() for more
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
struct platform_device __init *omap_device_build(const char *pdev_name,
int pdev_id,
struct omap_hwmod *oh,
void *pdata, int pdata_len)
{
int ret = -ENOMEM;
struct platform_device *pdev;
struct omap_device *od;
if (!oh || !pdev_name)
return ERR_PTR(-EINVAL);
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
if (strncmp(oh->name, "smartreflex", 11) &&
strncmp(oh->name, "dma", 3)) {
pr_warn("%s need to update %s to probe with dt\na",
__func__, pdev_name);
ret = -ENODEV;
goto odbs_exit;
}
pdev = platform_device_alloc(pdev_name, pdev_id);
if (!pdev) {
ret = -ENOMEM;
goto odbs_exit;
}
/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
if (pdev->id != -1)
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
else
dev_set_name(&pdev->dev, "%s", pdev->name);
/*
* Must be called before omap_device_alloc() as oh->od
* only contains the currently registered omap_device
* and will get overwritten by omap_device_alloc().
*/
ret = omap_device_copy_resources(oh, pdev);
if (ret)
goto odbs_exit1;
od = omap_device_alloc(pdev, &oh, 1);
if (IS_ERR(od)) {
ret = PTR_ERR(od);
goto odbs_exit1;
}
ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
goto odbs_exit2;
ret = omap_device_register(pdev);
if (ret)
goto odbs_exit2;
return pdev;
odbs_exit2:
omap_device_delete(od);
odbs_exit1:
platform_device_put(pdev);
odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
return ERR_PTR(ret);
}
#ifdef CONFIG_PM
static int _od_runtime_suspend(struct device *dev)
{
......
arch/arm/mach-omap2/omap_device.h
View file @ e052860d
......@@ -68,10 +68,6 @@ int omap_device_idle(struct platform_device *pdev);
/* Core code interface */
struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len);
struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt);
void omap_device_delete(struct omap_device *od);
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ e052860d
......@@ -1852,23 +1852,6 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
return oh->prcm.omap4.context_lost_counter;
}
/**
* _enable_preprogram - Pre-program an IP block during the _enable() process
* @oh: struct omap_hwmod *
*
* Some IP blocks (such as AESS) require some additional programming
* after enable before they can enter idle. If a function pointer to
* do so is present in the hwmod data, then call it and pass along the
* return value; otherwise, return 0.
*/
static int _enable_preprogram(struct omap_hwmod *oh)
{
if (!oh->class->enable_preprogram)
return 0;
return oh->class->enable_preprogram(oh);
}
/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
......@@ -1952,7 +1935,6 @@ static int _enable(struct omap_hwmod *oh)
_update_sysc_cache(oh);
_enable_sysc(oh);
}
r = _enable_preprogram(oh);
} else {
if (soc_ops.disable_module)
soc_ops.disable_module(oh);
......
arch/arm/mach-omap2/omap_hwmod.h
View file @ e052860d
......@@ -501,7 +501,6 @@ struct omap_hwmod_omap4_prcm {
* @sysc: device SYSCONFIG/SYSSTATUS register data
* @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
* @reset: ptr to fn to be executed in place of the standard hwmod reset fn
* @enable_preprogram: ptr to fn to be executed during device enable
* @lock: ptr to fn to be executed to lock IP registers
* @unlock: ptr to fn to be executed to unlock IP registers
*
......@@ -526,7 +525,6 @@ struct omap_hwmod_class {
struct omap_hwmod_class_sysconfig *sysc;
int (*pre_shutdown)(struct omap_hwmod *oh);
int (*reset)(struct omap_hwmod *oh);
int (*enable_preprogram)(struct omap_hwmod *oh);
void (*lock)(struct omap_hwmod *oh);
void (*unlock)(struct omap_hwmod *oh);
};
......@@ -662,7 +660,6 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
*
*/
extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
......
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View file @ e052860d
......@@ -11,7 +11,6 @@
*/
#include <linux/platform_data/i2c-omap.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
......@@ -126,21 +125,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
.flags = HWMOD_16BIT_REG,
};
/* dma attributes */
static struct omap_dma_dev_attr dma_dev_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32,
.lch_count = 32,
};
static struct omap_hwmod omap2420_dma_system_hwmod = {
.name = "dma",
.class = &omap2xxx_dma_hwmod_class,
.main_clk = "core_l3_ck",
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
/* mailbox */
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
......@@ -328,22 +312,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* dma_system -> L3 */
static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
.master = &omap2420_dma_system_hwmod,
.slave = &omap2xxx_l3_main_hwmod,
.clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dma_system */
static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_dma_system_hwmod,
.clk = "sdma_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
......@@ -435,8 +403,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2420_l4_wkup__gpio2,
&omap2420_l4_wkup__gpio3,
&omap2420_l4_wkup__gpio4,
&omap2420_dma_system__l3,
&omap2420_l4_core__dma_system,
&omap2420_l4_core__mailbox,
&omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
......
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View file @ e052860d
......@@ -12,7 +12,6 @@
#include <linux/platform_data/i2c-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
......@@ -121,21 +120,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
.class = &omap2xxx_gpio_hwmod_class,
};
/* dma attributes */
static struct omap_dma_dev_attr dma_dev_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
.lch_count = 32,
};
static struct omap_hwmod omap2430_dma_system_hwmod = {
.name = "dma",
.class = &omap2xxx_dma_hwmod_class,
.main_clk = "core_l3_ck",
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
/* mailbox */
static struct omap_hwmod omap2430_mailbox_hwmod = {
.name = "mailbox",
......@@ -508,22 +492,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* dma_system -> L3 */
static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
.master = &omap2430_dma_system_hwmod,
.slave = &omap2xxx_l3_main_hwmod,
.clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dma_system */
static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_dma_system_hwmod,
.clk = "sdma_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
......@@ -635,8 +603,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2430_l4_wkup__gpio3,
&omap2430_l4_wkup__gpio4,
&omap2430_l4_core__gpio5,
&omap2430_dma_system__l3,
&omap2430_l4_core__dma_system,
&omap2430_l4_core__mailbox,
&omap2430_l4_core__mcbsp1,
&omap2430_l4_core__mcbsp2,
......
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
View file @ e052860d
......@@ -7,7 +7,6 @@
*/
#include <linux/types.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
......@@ -95,23 +94,6 @@ struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
.sysc = &omap2xxx_gpio_sysc,
};
/* system dma */
static struct omap_hwmod_class_sysconfig omap2xxx_dma_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x002c,
.syss_offs = 0x0028,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2xxx_dma_hwmod_class = {
.name = "dma",
.sysc = &omap2xxx_dma_sysc,
};
/*
* 'mailbox' class
* mailbox module allowing communication between the on-chip processors
......
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
View file @ e052860d
......@@ -28,29 +28,13 @@ extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
extern struct omap_hwmod am33xx_l3_main_hwmod;
extern struct omap_hwmod am33xx_l3_s_hwmod;
......@@ -61,29 +45,13 @@ extern struct omap_hwmod am33xx_mpu_hwmod;
extern struct omap_hwmod am33xx_pruss_hwmod;
extern struct omap_hwmod am33xx_gfx_hwmod;
extern struct omap_hwmod am33xx_prcm_hwmod;
extern struct omap_hwmod am33xx_aes0_hwmod;
extern struct omap_hwmod am33xx_sha0_hwmod;
extern struct omap_hwmod am33xx_ocmcram_hwmod;
extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
extern struct omap_hwmod am33xx_dcan0_hwmod;
extern struct omap_hwmod am33xx_dcan1_hwmod;
extern struct omap_hwmod am33xx_elm_hwmod;
extern struct omap_hwmod am33xx_epwmss0_hwmod;
extern struct omap_hwmod am33xx_epwmss1_hwmod;
extern struct omap_hwmod am33xx_epwmss2_hwmod;
extern struct omap_hwmod am33xx_gpmc_hwmod;
extern struct omap_hwmod am33xx_rtc_hwmod;
extern struct omap_hwmod am33xx_spi0_hwmod;
extern struct omap_hwmod am33xx_spi1_hwmod;
extern struct omap_hwmod am33xx_spinlock_hwmod;
extern struct omap_hwmod am33xx_timer1_hwmod;
extern struct omap_hwmod am33xx_timer2_hwmod;
extern struct omap_hwmod am33xx_timer3_hwmod;
extern struct omap_hwmod am33xx_timer4_hwmod;
extern struct omap_hwmod am33xx_timer5_hwmod;
extern struct omap_hwmod am33xx_timer6_hwmod;
extern struct omap_hwmod am33xx_timer7_hwmod;
extern struct omap_hwmod am33xx_tpcc_hwmod;
extern struct omap_hwmod am33xx_tptc0_hwmod;
extern struct omap_hwmod am33xx_tptc1_hwmod;
......@@ -94,7 +62,6 @@ extern struct omap_hwmod_class am33xx_l4_hwmod_class;
extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
extern struct omap_hwmod_class am33xx_control_hwmod_class;
extern struct omap_hwmod_class am33xx_timer_hwmod_class;
extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
extern struct omap_hwmod_class am33xx_spi_hwmod_class;
......
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
View file @ e052860d
......@@ -106,50 +106,6 @@ struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
.user = OCP_USER_MPU,
};
/* l4 per/ls -> DCAN0 */
struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_dcan0_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 per/ls -> DCAN1 */
struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_dcan1_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_elm_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss0_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss1_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss2_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
......@@ -158,30 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.user = OCP_USER_MPU,
};
/* l4 ls -> spinlock */
struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_spinlock_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 ls -> mcspi0 */
struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_spi0_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 ls -> mcspi1 */
struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_spi1_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 per -> timer2 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
.master = &am33xx_l4_ls_hwmod,
......@@ -190,46 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
.user = OCP_USER_MPU,
};
/* l4 per -> timer3 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_timer3_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 per -> timer4 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_timer4_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 per -> timer5 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_timer5_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 per -> timer6 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_timer6_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l4 per -> timer7 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_timer7_hwmod,
.clk = "l4ls_gclk",
.user = OCP_USER_MPU,
};
/* l3 main -> tpcc */
struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
.master = &am33xx_l3_main_hwmod,
......@@ -268,19 +160,3 @@ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
.slave = &am33xx_ocmcram_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3 main -> sha0 HIB2 */
struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_sha0_hwmod,
.clk = "sha0_fck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3 main -> AES0 HIB2 */
struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_aes0_hwmod,
.clk = "aes0_fck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View file @ e052860d
......@@ -81,36 +81,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = {
.rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets),
};
/*
* 'adc/tsc' class
* TouchScreen Controller (Anolog-To-Digital Converter)
*/
static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x10,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = {
.name = "adc_tsc",
.sysc = &am33xx_adc_tsc_sysc,
};
static struct omap_hwmod am33xx_adc_tsc_hwmod = {
.name = "adc_tsc",
.class = &am33xx_adc_tsc_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
.main_clk = "adc_tsc_fck",
.prcm = {
.omap4 = {
.clkctrl_offs = AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* Modules omap_hwmod structures
......@@ -226,34 +196,6 @@ static struct omap_hwmod am33xx_control_hwmod = {
},
};
/* lcdc */
static struct omap_hwmod_class_sysconfig lcdc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x54,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
.idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class am33xx_lcdc_hwmod_class = {
.name = "lcdc",
.sysc = &lcdc_sysc,
};
static struct omap_hwmod am33xx_lcdc_hwmod = {
.name = "lcdc",
.class = &am33xx_lcdc_hwmod_class,
.clkdm_name = "lcdc_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "lcd_gclk",
.prcm = {
.omap4 = {
.clkctrl_offs = AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* Interfaces
......@@ -331,21 +273,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
.user = OCP_USER_MPU,
};
/* L4 WKUP -> ADC_TSC */
static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
.master = &am33xx_l4_wkup_hwmod,
.slave = &am33xx_adc_tsc_hwmod,
.clk = "dpll_core_m4_div2_ck",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_lcdc_hwmod,
.clk = "dpll_core_m4_ck",
.user = OCP_USER_MPU,
};
/* l4 wkup -> timer1 */
static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
.master = &am33xx_l4_wkup_hwmod,
......@@ -375,32 +302,14 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__smartreflex1,
&am33xx_l4_wkup__timer1,
&am33xx_l4_wkup__rtc,
&am33xx_l4_wkup__adc_tsc,
&am33xx_l4_hs__pruss,
&am33xx_l4_per__dcan0,
&am33xx_l4_per__dcan1,
&am33xx_l4_ls__timer2,
&am33xx_l4_ls__timer3,
&am33xx_l4_ls__timer4,
&am33xx_l4_ls__timer5,
&am33xx_l4_ls__timer6,
&am33xx_l4_ls__timer7,
&am33xx_l3_main__tpcc,
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
&am33xx_l4_ls__epwmss1,
&am33xx_l4_ls__epwmss2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__lcdc,
&am33xx_l4_ls__mcspi0,
&am33xx_l4_ls__mcspi1,
&am33xx_l3_main__tptc0,
&am33xx_l3_main__tptc1,
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
&am33xx_l3_main__sha0,
&am33xx_l3_main__aes0,
NULL,
};
......
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ e052860d
......@@ -16,7 +16,6 @@
#include <linux/power/smartreflex.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
......@@ -833,47 +832,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.class = &omap3xxx_gpio_hwmod_class,
};
/* dma attributes */
static struct omap_dma_dev_attr dma_dev_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
.lch_count = 32,
};
static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x002c,
.syss_offs = 0x0028,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
.name = "dma",
.sysc = &omap3xxx_dma_sysc,
};
/* dma_system */
static struct omap_hwmod omap3xxx_dma_system_hwmod = {
.name = "dma",
.class = &omap3xxx_dma_hwmod_class,
.main_clk = "core_l3_ick",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT,
},
},
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
/*
* 'mcbsp' class
* multi channel buffered serial port controller
......@@ -2233,23 +2191,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* dma_system -> L3 */
static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
.master = &omap3xxx_dma_system_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> dma_system */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dma_system_hwmod,
.clk = "core_l4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
.master = &omap3xxx_l4_core_hwmod,
......@@ -2628,8 +2569,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_per__gpio4,
&omap3xxx_l4_per__gpio5,
&omap3xxx_l4_per__gpio6,
&omap3xxx_dma_system__l3,
&omap3xxx_l4_core__dma_system,
&omap3xxx_l4_core__mcbsp1,
&omap3xxx_l4_per__mcbsp2,
&omap3xxx_l4_per__mcbsp3,
......
arch/arm/mach-omap2/omap_hwmod_43xx_data.c
View file @ e052860d
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ e052860d
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View file @ e052860d
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View file @ e052860d
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_common_data.h
View file @ e052860d
......@@ -98,7 +98,6 @@ extern struct omap_hwmod_class omap2_hdq1w_class;
extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mcspi_class;
......
arch/arm/mach-omap2/omap_hwmod_reset.c
View file @ e052860d
......@@ -26,8 +26,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <sound/aess.h>
#include "omap_hwmod.h"
#include "common.h"
......@@ -40,28 +38,6 @@
#define OMAP_RTC_STATUS_BUSY BIT(0)
#define OMAP_RTC_MAX_READY_TIME 50
/**
* omap_hwmod_aess_preprogram - enable AESS internal autogating
* @oh: struct omap_hwmod *
*
* The AESS will not IdleAck to the PRCM until its internal autogating
* is enabled. Since internal autogating is disabled by default after
* AESS reset, we must enable autogating after the hwmod code resets
* the AESS. Returns 0.
*/
int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
{
void __iomem *va;
va = omap_hwmod_get_mpu_rt_va(oh);
if (!va)
return -EINVAL;
aess_enable_autogating(va);
return 0;
}
/**
* omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
* @oh: struct omap_hwmod *
......
arch/arm/mach-omap2/pdata-quirks.c
View file @ e052860d
......@@ -529,6 +529,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),
OF_DEV_AUXDATA("ti,omap-sdma", 0, NULL, &dma_plat_info),
{ /* sentinel */ },
};
......
arch/arm/mach-omap2/pm24xx.c
View file @ e052860d
......@@ -83,8 +83,6 @@ static int omap2_enter_full_retention(void)
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
cpu_cluster_pm_enter();
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
......@@ -96,8 +94,6 @@ static int omap2_enter_full_retention(void)
OMAP_SDRC_REGADDR(SDRC_POWER));
no_sleep:
cpu_cluster_pm_exit();
clk_enable(osc_ck);
/* clear CORE wake-up events */
......@@ -162,25 +158,27 @@ static int omap2_can_sleep(void)
return 0;
if (__clk_is_enabled(osc_ck))
return 0;
if (omap_dma_running())
return 0;
return 1;
}
static void omap2_pm_idle(void)
{
if (!omap2_can_sleep()) {
if (omap_irq_pending())
return;
omap2_enter_mpu_retention();
return;
}
int error;
if (omap_irq_pending())
return;
error = cpu_cluster_pm_enter();
if (error || !omap2_can_sleep()) {
omap2_enter_mpu_retention();
goto out_cpu_cluster_pm;
}
omap2_enter_full_retention();
out_cpu_cluster_pm:
cpu_cluster_pm_exit();
}
static void __init prcm_setup_regs(void)
......
arch/arm/mach-omap2/pm34xx.c
View file @ e052860d
......@@ -25,7 +25,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/omap-dma.h>
#include <linux/omap-gpmc.h>
#include <trace/events/power.h>
......@@ -85,7 +84,6 @@ static void omap3_core_save_context(void)
omap3_gpmc_save_context();
/* Save the system control module context, padconf already save above*/
omap3_control_save_context();
omap_dma_global_context_save();
}
static void omap3_core_restore_context(void)
......@@ -96,7 +94,6 @@ static void omap3_core_restore_context(void)
omap3_gpmc_restore_context();
/* Restore the interrupt controller context */
omap_intc_restore_context();
omap_dma_global_context_restore();
}
/*
......@@ -547,9 +544,7 @@ int __init omap3_pm_init(void)
local_irq_disable();
omap_dma_global_context_save();
omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
}
......
arch/arm/plat-omap/dma.c
View file @ e052860d
This diff is collapsed.
drivers/dma/ti/omap-dma.c
View file @ e052860d
This diff is collapsed.
include/linux/omap-dma.h
View file @ e052860d
......@@ -129,7 +129,6 @@
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
#define DMA_ENGINE_HANDLE_IRQ BIT(0x10)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
......@@ -239,9 +238,6 @@ struct omap_dma_lch {
void (*callback)(int lch, u16 ch_status, void *data);
void *data;
long flags;
/* required for Dynamic chaining */
int prev_linked_ch;
int next_linked_ch;
int state;
int chain_id;
int status;
......@@ -303,7 +299,6 @@ extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch);
extern void omap_enable_dma_irq(int ch, u16 irq_bits);
extern void omap_disable_dma_irq(int ch, u16 irq_bits);
extern void omap_free_dma(int ch);
extern void omap_start_dma(int lch);
......@@ -312,7 +307,6 @@ extern void omap_set_dma_transfer_params(int lch, int data_type,
int elem_count, int frame_count,
int sync_mode,
int dma_trigger, int src_or_dst_synch);
extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
......@@ -329,22 +323,10 @@ extern void omap_set_dma_dest_data_pack(int lch, int enable);
extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_params(int lch,
struct omap_dma_channel_params *params);
extern void omap_dma_link_lch(int lch_head, int lch_queue);
extern int omap_set_dma_callback(int lch,
void (*callback)(int lch, u16 ch_status, void *data),
void *data);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
extern int omap_get_dma_active_status(int lch);
extern int omap_dma_running(void);
extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
int tparams);
void omap_dma_global_context_save(void);
void omap_dma_global_context_restore(void);
#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
#include <mach/lcd_dma.h>
......
include/sound/aess.h deleted 100644 → 0
View file @ 785ca50f
/*
* AESS IP block reset
*
* Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#ifndef __SOUND_AESS_H__
#define __SOUND_AESS_H__
#include <linux/kernel.h>
#include <linux/io.h>
/*
* AESS_AUTO_GATING_ENABLE_OFFSET: offset in bytes of the AESS IP
* block's AESS_AUTO_GATING_ENABLE__1 register from the IP block's
* base address
*/
#define AESS_AUTO_GATING_ENABLE_OFFSET 0x07c
/* Register bitfields in the AESS_AUTO_GATING_ENABLE__1 register */
#define AESS_AUTO_GATING_ENABLE_SHIFT 0
/**
* aess_enable_autogating - enable AESS internal autogating
* @oh: struct omap_hwmod *
*
* Enable internal autogating on the AESS. This allows the AESS to
* indicate that it is idle to the OMAP PRCM. Returns 0.
*/
static inline void aess_enable_autogating(void __iomem *base)
{
u32 v;
/* Set AESS_AUTO_GATING_ENABLE__1.ENABLE to allow idle entry */
v = 1 << AESS_AUTO_GATING_ENABLE_SHIFT;
writel(v, base + AESS_AUTO_GATING_ENABLE_OFFSET);
}
#endif /* __SOUND_AESS_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7