Commit e0bed077 authored by Yingjoe Chen's avatar Yingjoe Chen Committed by Matthias Brugger

ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi

Add sysirq settings for mt6589/mt8135/mt8127
This also correct timer interrupt flag. The old setting works
because boot loader already set polarity for timer interrupt.
Without intpol support, the setting was not changed so gic
can get the irq correctly.
Signed-off-by: default avatarYingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 97bf6af1
......@@ -19,7 +19,7 @@
/ {
compatible = "mediatek,mt6589";
interrupt-parent = <&gic>;
interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
......@@ -76,15 +76,25 @@ soc {
timer: timer@10008000 {
compatible = "mediatek,mt6577-timer";
reg = <0x10008000 0x80>;
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt6589-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10200100 0x1c>;
};
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
<0x10212000 0x1000>,
<0x10214000 0x2000>,
......
......@@ -18,7 +18,7 @@
/ {
compatible = "mediatek,mt8127";
interrupt-parent = <&gic>;
interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
......@@ -76,15 +76,25 @@ timer: timer@10008000 {
compatible = "mediatek,mt8127-timer",
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt8127-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200100 0 0x1c>;
};
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
......
......@@ -18,7 +18,7 @@
/ {
compatible = "mediatek,mt8135";
interrupt-parent = <&gic>;
interrupt-parent = <&sysirq>;
cpu-map {
cluster0 {
......@@ -98,15 +98,25 @@ timer: timer@10008000 {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
sysirq: interrupt-controller@10200030 {
compatible = "mediatek,mt8135-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200030 0 0x1c>;
};
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment