Commit e172274c authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Russell King

[ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices

Add a function to dynamically allocate and register pxa2xx-spi platform
devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and
lubbock to use it.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: default avatarEric Miao <eric.miao@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent cabb352a
......@@ -139,6 +139,7 @@ config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
endmenu
......
......@@ -13,6 +13,7 @@
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/pxa2xx_spi.h>
#include <asm/arch/camera.h>
#include <asm/arch/audio.h>
......@@ -831,3 +832,20 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
}
#endif /* CONFIG_PXA3xx */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
{
struct platform_device *pd;
pd = platform_device_alloc("pxa2xx-spi", id);
if (pd == NULL) {
printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
id);
return;
}
pd->dev.platform_data = info;
platform_device_add(pd);
}
......@@ -226,14 +226,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
.num_chipselect = 0,
};
static struct platform_device pxa_ssp = {
.name = "pxa2xx-spi",
.id = 1,
.dev = {
.platform_data = &pxa_ssp_master_info,
},
};
static int lubbock_ads7846_pendown_state(void)
{
/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
......@@ -367,7 +359,6 @@ static struct platform_device *devices[] __initdata = {
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
&pxa_ssp,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
......@@ -501,6 +492,7 @@ static void __init lubbock_init(void)
lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
......
......@@ -24,7 +24,9 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/hardware.h>
......@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
/*
* SPI host and devices
*/
static struct pxa2xx_spi_master pxa_ssp_master_info = {
.num_chipselect = 1,
};
static struct max7301_platform_data max7301_info = {
.base = -1,
};
/* bus_num must match id in pxa2xx_set_spi_info() call */
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "max7301",
.platform_data = &max7301_info,
.max_speed_hz = 13000000,
.bus_num = 1,
.chip_select = 0,
.mode = SPI_MODE_0,
},
};
/*
* NOR flash
*/
static struct physmap_flash_data pcm027_flash_data = {
.width = 4,
};
......@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
#ifdef CONFIG_MACH_PCM990_BASEBOARD
pcm990_baseboard_init();
#endif
pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
static void __init pcm027_map_io(void)
......
......@@ -41,4 +41,6 @@ struct pxa2xx_spi_chip {
void (*cs_control)(u32 command);
};
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
#endif /*PXA2XX_SPI_H_*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment