Merge branch 'usb-linus' into usb-next

This is to pick up the changes to the option driver, which are needed
for follow-on patches from Johan.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/pci/pci.c

@@ -1744,6 +1744,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* Some devices mustn't be in D3 during system sleep */
+	if (target_state == PCI_D3hot &&
+			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+		return 0;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);

drivers/pci/quirks.c

@@ -2929,6 +2929,32 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+	const char *sys_info;
+	static const char good_Asus_board[] = "P8Z68-V";
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+		return;
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+		return;
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && memcmp(sys_info, good_Asus_board,
+			sizeof(good_Asus_board) - 1) == 0)
+		return;
+
+	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {

drivers/usb/class/cdc-wdm.c

@@ -55,6 +55,15 @@ static const struct usb_device_id wdm_ids[] = {
 		.bInterfaceSubClass = 1,
 		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
 	},
+	{
+		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+				      USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 

drivers/usb/core/hcd-pci.c

@@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.

drivers/usb/gadget/atmel_usba_udc.c

@@ -599,12 +599,6 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
-	if (ep->ep.desc) {
-		spin_unlock_irqrestore(&ep->udc->lock, flags);
-		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-		return -EBUSY;
-	}
-
 	ep->ep.desc = desc;
 	ep->ep.maxpacket = maxpacket;
 

drivers/usb/gadget/fsl_qe_udc.c

@@ -1596,7 +1596,7 @@ static int qe_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct qe_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
+	if (!_ep || !desc || _ep->name == ep_name[0] ||
 			(desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 

drivers/usb/gadget/fsl_udc_core.c

@@ -567,7 +567,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct fsl_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 
@@ -2575,7 +2575,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	/* for ep0: the desc defined here;
 	 * for other eps, gadget layer called ep_enable with defined desc
 	 */
-	udc_controller->eps[0].desc = &fsl_ep0_desc;
+	udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
 	udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
 
 	/* setup the udc->eps[] for non-control endpoints and link

drivers/usb/gadget/fsl_usb2_udc.h

@@ -568,10 +568,10 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 /*
  * ### internal used help routines.
  */
-#define ep_index(EP)		((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress&0xF)
 #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
 #define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
-			USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
 			& USB_DIR_IN)==USB_DIR_IN)
 #define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
 					&udc->eps[pipe])

drivers/usb/gadget/goku_udc.c

@@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	unsigned long	flags;
 
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 	dev = ep->dev;

drivers/usb/gadget/mv_udc_core.c

@@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
 
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 

drivers/usb/gadget/omap_udc.c

@@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
 	u16		maxp;
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->maxpacket < usb_endpoint_maxp(desc)) {

drivers/usb/gadget/pxa25x_udc.c

@@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	struct pxa25x_udc       *dev;
 
 	ep = container_of (_ep, struct pxa25x_ep, ep);
-	if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
+	if (!_ep || !desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->fifo_size < usb_endpoint_maxp (desc)) {

drivers/usb/gadget/s3c-hsudc.c

@@ -760,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	u32 ecr = 0;
 
 	hsep = our_ep(_ep);
-	if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
+	if (!_ep || !desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
 		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))

drivers/usb/gadget/s3c2410_udc.c

@@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	ep = to_s3c2410_ep(_ep);
 
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;

drivers/usb/host/ehci-pci.c

@@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
-			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
-			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
-				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
-				hcd->broken_pci_sleep = 1;
-				device_set_wakeup_capable(&pdev->dev, false);
-			}
-		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {

drivers/usb/musb/davinci.c

@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 
 #include <mach/cputype.h>
+#include <mach/hardware.h>
 
 #include <asm/mach-types.h>
 

drivers/usb/musb/davinci.h

@@ -15,7 +15,7 @@
  */
 
 /* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR	0x01c40034
 #define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
 #define USBPHY_PHYCLKGD		BIT(8)
 #define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */
@@ -27,7 +27,7 @@
 #define USBPHY_OTGPDWN		BIT(1)
 #define USBPHY_PHYPDWN		BIT(0)
 
-#define DM355_DEEPSLEEP_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR	0x01c40048
 #define DRVVBUS_FORCE		BIT(2)
 #define DRVVBUS_OVERRIDE	BIT(1)
 

drivers/usb/musb/musb_gadget.c

@@ -1232,6 +1232,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
 	}
 
 	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
 
 	/* abort all pending DMA and requests */
 	nuke(musb_ep, -ESHUTDOWN);

drivers/usb/serial/cp210x.c

@@ -82,6 +82,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */

drivers/usb/serial/ftdi_sio.c

@@ -737,6 +737,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -784,6 +784,7 @@
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
 
 
 /*

drivers/usb/serial/generic.c

@@ -39,13 +39,6 @@ MODULE_PARM_DESC(product, "User specified USB idProduct");
 
 static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static const struct usb_device_id generic_serial_ids[] = {
-	{.driver_info = 42},
-	{}
-};
-
 /* All of the device info needed for the Generic Serial Converter */
 struct usb_serial_driver usb_serial_generic_device = {
 	.driver = {
@@ -79,7 +72,8 @@ int usb_serial_generic_register(int _debug)
 		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
 	/* register our generic driver with ourselves */
-	retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
+	retval = usb_serial_register_drivers(serial_drivers,
+			"usbserial_generic", generic_device_ids);
 #endif
 	return retval;
 }

drivers/usb/serial/mct_u232.c

@@ -309,13 +309,16 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 			MCT_U232_SET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0)
-		dev_err(&serial->dev->dev,
-			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+	kfree(buf);
+
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-	kfree(buf);
-	return rc;
+	if (rc < 0) {
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
 } /* mct_u232_set_modem_ctrl */
 
 static int mct_u232_get_modem_stat(struct usb_serial *serial,

drivers/usb/serial/mos7840.c

@@ -190,7 +190,7 @@
 
 static int device_type;
 
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},

drivers/usb/serial/option.c

@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
@@ -150,6 +151,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB
@@ -425,7 +427,7 @@ static void option_instat_callback(struct urb *urb);
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
 
-/* YUGA products  www.yuga-info.com*/
+/* YUGA products  www.yuga-info.com gavin.kx@qq.com */
 #define YUGA_VENDOR_ID				0x257A
 #define YUGA_PRODUCT_CEM600			0x1601
 #define YUGA_PRODUCT_CEM610			0x1602
@@ -442,6 +444,8 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CEU516			0x160C
 #define YUGA_PRODUCT_CEU528			0x160D
 #define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
 
 #define YUGA_PRODUCT_CWM600			0x2601
 #define YUGA_PRODUCT_CWM610			0x2602
@@ -457,23 +461,26 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CWU518			0x260B
 #define YUGA_PRODUCT_CWU516			0x260C
 #define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
 #define YUGA_PRODUCT_CWU526			0x260F
-
-#define YUGA_PRODUCT_CLM600			0x2601
-#define YUGA_PRODUCT_CLM610			0x2602
-#define YUGA_PRODUCT_CLM500			0x2603
-#define YUGA_PRODUCT_CLM510			0x2604
-#define YUGA_PRODUCT_CLM800			0x2605
-#define YUGA_PRODUCT_CLM900			0x2606
-
-#define YUGA_PRODUCT_CLU718			0x2607
-#define YUGA_PRODUCT_CLU716			0x2608
-#define YUGA_PRODUCT_CLU728			0x2609
-#define YUGA_PRODUCT_CLU726			0x260A
-#define YUGA_PRODUCT_CLU518			0x260B
-#define YUGA_PRODUCT_CLU516			0x260C
-#define YUGA_PRODUCT_CLU528			0x260D
-#define YUGA_PRODUCT_CLU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
+
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
+
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
 
 /* Viettel products */
 #define VIETTEL_VENDOR_ID			0x2262
@@ -666,6 +673,11 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -1209,6 +1221,11 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
@@ -1245,7 +1262,7 @@ static struct usb_serial_driver option_1port_device = {
 	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
-	.release           = usb_wwan_release,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
 	.suspend           = usb_wwan_suspend,
@@ -1259,35 +1276,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 static bool debug;
 
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
-	/* Input endpoints and buffer for this port */
-	struct urb *in_urbs[N_IN_URB];
-	u8 *in_buffer[N_IN_URB];
-	/* Output endpoints and buffer for this port */
-	struct urb *out_urbs[N_OUT_URB];
-	u8 *out_buffer[N_OUT_URB];
-	unsigned long out_busy;		/* Bit vector of URBs in use */
-	int opened;
-	struct usb_anchor delayed;
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-
-	unsigned long tx_start_time[N_OUT_URB];
-};
-
 module_usb_serial_driver(serial_drivers, option_ids);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
@@ -1359,12 +1347,22 @@ static int option_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+
+	kfree(priv);
+}
+
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
-	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
 
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
 
@@ -1423,7 +1421,7 @@ static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
-	struct option_port_private *portdata;
+	struct usb_wwan_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 

drivers/usb/serial/qcserial.c

@@ -105,7 +105,13 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */

drivers/usb/serial/sierra.c

@@ -294,6 +294,10 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},

drivers/usb/serial/usb-serial.c

@@ -659,12 +659,14 @@ static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
-	const struct usb_device_id *id;
+	const struct usb_device_id *id = NULL;
 	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
 
 	/* Check if the usb id matches a known device */
 	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
-		id = get_iface_id(drv, iface);
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
 		if (id)
 			return drv;
 	}

include/linux/pci.h

@@ -176,6 +176,8 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+	/* Device causes system crash if in D3 during S3 sleep */
+	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {

include/linux/usb/hcd.h

@@ -132,8 +132,6 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
-	unsigned		broken_pci_sleep:1;	/* Don't put the
-			controller in PCI-D3 for system sleep */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */