Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Thomas writes:
  "Three small fixes for clocksource drivers:
   - Proper error handling in the Atmel PIT driver
   - Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again
   - Fix the next event function for Facebook Backpack-CMM BMC chips so
     usleep(100) doesnt sleep several milliseconds"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  clocksource/drivers/fttmr010: Fix set_next_event handler
  clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

drivers/clocksource/timer-atmel-pit.c

@@ -180,26 +180,29 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 	data->base = of_iomap(node, 0);
 	if (!data->base) {
 		pr_err("Could not map PIT address\n");
-		return -ENXIO;
+		ret = -ENXIO;
+		goto exit;
 	}
 
 	data->mck = of_clk_get(node, 0);
 	if (IS_ERR(data->mck)) {
 		pr_err("Unable to get mck clk\n");
-		return PTR_ERR(data->mck);
+		ret = PTR_ERR(data->mck);
+		goto exit;
 	}
 
 	ret = clk_prepare_enable(data->mck);
 	if (ret) {
 		pr_err("Unable to enable mck\n");
-		return ret;
+		goto exit;
 	}
 
 	/* Get the interrupts property */
 	data->irq = irq_of_parse_and_map(node, 0);
 	if (!data->irq) {
 		pr_err("Unable to get IRQ from DT\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto exit;
 	}
 
 	/*
@@ -227,7 +230,7 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 	ret = clocksource_register_hz(&data->clksrc, pit_rate);
 	if (ret) {
 		pr_err("Failed to register clocksource\n");
-		return ret;
+		goto exit;
 	}
 
 	/* Set up irq handler */
@@ -236,7 +239,8 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 			  "at91_tick", data);
 	if (ret) {
 		pr_err("Unable to setup IRQ\n");
-		return ret;
+		clocksource_unregister(&data->clksrc);
+		goto exit;
 	}
 
 	/* Set up and register clockevents */
@@ -254,6 +258,10 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 	clockevents_register_device(&data->clkevt);
 
 	return 0;
+
+exit:
+	kfree(data);
+	return ret;
 }
 TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
 		       at91sam926x_pit_dt_init);

drivers/clocksource/timer-fttmr010.c

@@ -130,13 +130,17 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	cr &= ~fttmr010->t1_enable_val;
 	writel(cr, fttmr010->base + TIMER_CR);
 
-	/* Setup the match register forward/backward in time */
-	cr = readl(fttmr010->base + TIMER1_COUNT);
-	if (fttmr010->count_down)
-		cr -= cycles;
-	else
-		cr += cycles;
-	writel(cr, fttmr010->base + TIMER1_MATCH1);
+	if (fttmr010->count_down) {
+		/*
+		 * ASPEED Timer Controller will load TIMER1_LOAD register
+		 * into TIMER1_COUNT register when the timer is re-enabled.
+		 */
+		writel(cycles, fttmr010->base + TIMER1_LOAD);
+	} else {
+		/* Setup the match register forward in time */
+		cr = readl(fttmr010->base + TIMER1_COUNT);
+		writel(cr + cycles, fttmr010->base + TIMER1_MATCH1);
+	}
 
 	/* Start */
 	cr = readl(fttmr010->base + TIMER_CR);

drivers/clocksource/timer-ti-32k.c

@@ -97,6 +97,9 @@ static int __init ti_32k_timer_init(struct device_node *np)
 		return -ENXIO;
 	}
 
+	if (!of_machine_is_compatible("ti,am43"))
+		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
 	ti_32k_timer.counter = ti_32k_timer.base;
 
 	/*