net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES

A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c

@@ -201,7 +201,7 @@ static void mlx5e_xdp_mpwqe_session_start(struct mlx5e_xdpsq *sq)
 	pi = mlx5e_xdpsq_get_next_pi(sq, MLX5_SEND_WQE_MAX_WQEBBS);
 	session->wqe = MLX5E_TX_FETCH_WQE(sq, pi);
 
-	prefetchw(session->wqe->data);
+	net_prefetchw(session->wqe->data);
 	session->ds_count  = MLX5E_XDP_TX_EMPTY_DS_COUNT;
 	session->pkt_count = 0;
 
@@ -322,7 +322,7 @@ mlx5e_xmit_xdp_frame(struct mlx5e_xdpsq *sq, struct mlx5e_xdp_xmit_data *xdptxd,
 
 	struct mlx5e_xdpsq_stats *stats = sq->stats;
 
-	prefetchw(wqe);
+	net_prefetchw(wqe);
 
 	if (unlikely(dma_len < MLX5E_XDP_MIN_INLINE || sq->hw_mtu < dma_len)) {
 		stats->err++;

drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c

@@ -49,7 +49,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_mpwrq_linear(struct mlx5e_rq *rq,
 	xdp->data_end = xdp->data + cqe_bcnt32;
 	xdp_set_data_meta_invalid(xdp);
 	xsk_buff_dma_sync_for_cpu(xdp);
-	prefetch(xdp->data);
+	net_prefetch(xdp->data);
 
 	rcu_read_lock();
 	consumed = mlx5e_xdp_handle(rq, NULL, &cqe_bcnt32, xdp);
@@ -100,7 +100,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_linear(struct mlx5e_rq *rq,
 	xdp->data_end = xdp->data + cqe_bcnt;
 	xdp_set_data_meta_invalid(xdp);
 	xsk_buff_dma_sync_for_cpu(xdp);
-	prefetch(xdp->data);
+	net_prefetch(xdp->data);
 
 	if (unlikely(get_cqe_opcode(cqe) != MLX5_CQE_RESP_SEND)) {
 		rq->stats->wqe_err++;

drivers/net/ethernet/mellanox/mlx5/core/en_rx.c

@@ -30,7 +30,6 @@
  * SOFTWARE.
  */
 
-#include <linux/prefetch.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
 #include <linux/tcp.h>
@@ -1141,8 +1140,8 @@ mlx5e_skb_from_cqe_linear(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe,
 
 	dma_sync_single_range_for_cpu(rq->pdev, di->addr, wi->offset,
 				      frag_size, DMA_FROM_DEVICE);
-	prefetchw(va); /* xdp_frame data area */
-	prefetch(data);
+	net_prefetchw(va); /* xdp_frame data area */
+	net_prefetch(data);
 
 	rcu_read_lock();
 	mlx5e_fill_xdp_buff(rq, va, rx_headroom, cqe_bcnt, &xdp);
@@ -1184,7 +1183,7 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe,
 		return NULL;
 	}
 
-	prefetchw(skb->data);
+	net_prefetchw(skb->data);
 
 	while (byte_cnt) {
 		u16 frag_consumed_bytes =
@@ -1399,7 +1398,7 @@ mlx5e_skb_from_cqe_mpwrq_nonlinear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *w
 		return NULL;
 	}
 
-	prefetchw(skb->data);
+	net_prefetchw(skb->data);
 
 	if (unlikely(frag_offset >= PAGE_SIZE)) {
 		di++;
@@ -1452,8 +1451,8 @@ mlx5e_skb_from_cqe_mpwrq_linear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *wi,
 
 	dma_sync_single_range_for_cpu(rq->pdev, di->addr, head_offset,
 				      frag_size, DMA_FROM_DEVICE);
-	prefetchw(va); /* xdp_frame data area */
-	prefetch(data);
+	net_prefetchw(va); /* xdp_frame data area */
+	net_prefetch(data);
 
 	rcu_read_lock();
 	mlx5e_fill_xdp_buff(rq, va, rx_headroom, cqe_bcnt32, &xdp);

drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c

@@ -30,7 +30,6 @@
  * SOFTWARE.
  */
 
-#include <linux/prefetch.h>
 #include <linux/ip.h>
 #include <linux/udp.h>
 #include <net/udp.h>
@@ -115,7 +114,7 @@ static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv)
 		return NULL;
 	}
 
-	prefetchw(skb->data);
+	net_prefetchw(skb->data);
 	skb_reserve(skb, NET_IP_ALIGN);
 
 	/*  Reserve for ethernet and IP header  */