Commit e255d5eb authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: remove IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT

Just setting IEEE80211_CONF_CHANGE_PS should be sufficient
for changes in the power saving things. The driver already
tells us whether it wants notification of dynps via the
"have dynps support" hw flag.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: default avatarKalle Valo <kalle.valo@iki.fi>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 1d4df3a5
......@@ -532,8 +532,7 @@ enum ieee80211_conf_flags {
* @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag changed
* @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
......@@ -544,10 +543,9 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5),
IEEE80211_CONF_CHANGE_POWER = BIT(6),
IEEE80211_CONF_CHANGE_CHANNEL = BIT(7),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8),
IEEE80211_CONF_CHANGE_POWER = BIT(5),
IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
};
/**
......
......@@ -622,8 +622,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
conf->dynamic_ps_timeout = timeout;
if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
ieee80211_hw_config(local,
IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT);
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
ieee80211_recalc_ps(local, -1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment